NDIS_SET_PACKET_STATUS function
Note NDIS 5. x has been deprecated and is superseded by NDIS 6. x. For new NDIS driver development, see Network Drivers Starting with Windows Vista. For information about porting NDIS 5. x drivers to NDIS 6. x, see Porting NDIS 5.x Drivers to NDIS 6.0.
NDIS_SET_PACKET_STATUS sets the Status value in the out-of-band data block associated with a given packet descriptor just before a driver calls NdisMIndicateReceivePacket or before a driver's MiniportSendPackets function returns control.
Syntax
VOID NDIS_SET_PACKET_STATUS(
_In_ PNDIS_PACKET Packet,
_In_ NDIS_STATUS Status
);
Parameters
Packet [in]
Pointer to a packet descriptor either allocated by the caller for a receive indication or by a protocol for a send.Status [in]
Specifies the status to be set.For packet descriptors used in receive indications, the value can be either of the following:
NDIS_STATUS_SUCCESS
The driver is relinquising ownership of the packet about to be indicated with NdisMIndicateReceivePacket until the packet descriptor is returned to its MiniportReturnPacket function.Protocols that receive the indication can use the packet descriptor, along with all buffers mapped by buffer descriptors chained to the packet descriptor and any out-of-band information supplied with the packet, to copy the indicated net packet data, possibly forwarding the processed copy to interested clients.
NDIS_STATUS_RESOURCES
The driver is retaining ownership of the packet about to be indicated with NdisMIndicateReceivePacket and of all subsequent packets in the packet array. All these packets will be indicated, one at a time, to the ProtocolReceive functions of bound protocols.Setting this status forces bound protocols to return ownership of each such packet descriptor, of any medium-specific buffer in the out-of-band data block for each packet descriptor, and of the memory mapped by each packet descriptor's respective chained buffer descriptors to the indicating driver more quickly. The protocols must wait for a call to their ProtocolReceiveComplete functions to begin postprocessing the data they copied from the indication and forwarding the processed data to their clients.
An indicating driver can set this status if it is running low on packet pool or buffer pool. An indicating NIC driver usually sets this status if it is running low on NIC receive buffers due to high network traffic. A bus-master DMA NIC driver might call NdisMAllocateSharedMemoryAsync in these circumstances to get additional NIC receive buffer space.
NDIS assumes that, if this status is set for a packet in an indicated array, it is set for all subsequent packets in that array. Consequently, an indicating driver need not set the status for subsequent packet descriptors in an array after it sets this status in the out-of-band data block for one packet descriptor.
For packet descriptors used in sends, MiniportSendPackets can set one of the following values:
NDIS_STATUS_PENDING
The driver will complete the requested send operation asynchronously.After MiniportSendPackets returns control, the driver will call NdisMSendComplete with a final completion status for the given packet descriptor, which NDIS propagates to the ProtocolSendComplete function of the driver that allocated the resources specified by the packet descriptor and initiated the send.
NDIS_STATUS_RESOURCES
The driver cannot process all sends specified in a given packet array due to current resource constraints.NDIS assumes that the Status member for all subsequent packet descriptors in the array given to MiniportSendPackets is set to the same value. NDIS queues these packet descriptors internally in the same order for resubmission to MiniportSendPackets when the driver calls NdisMSendResourcesAvailable or NdisMSendComplete, whichever call occurs first. NDIS reflects this miniport driver-set status value to protocols as NDIS_STATUS_PENDING.
NDIS_STATUS_XXX
MiniportSendPackets is completing a given send request before it returns control.Whether such a send packet is completed with NDIS_STATUS_SUCCESS or a driver-determined error status, MiniportSendPackets must set the Status member for the given packet descriptor so that NDIS can reflect this status back to the protocol that initiated the send when NDIS calls ProtocolSendComplete with the returned packet descriptor.
Return value
None
Remarks
Only drivers that indicate receives with NdisMIndicateReceivePacket to bound protocols and/or drivers that have MiniportSendPackets functions use the NDIS_SET_PACKET_STATUS macro.
After such an underlying driver has set the Status for some number of packet descriptors in an array and called NdisMIndicateReceivePacket with the array of pointers to those packet descriptors, it must use the NDIS_GET_PACKET_STATUS macro when NdisMIndicateReceivePacket returns control. The returned Status in the NDIS_PACKET_OOB_DATA block associated with each packet descriptor that the driver indicated with NDIS_STATUS_SUCCESS determines what the indicating driver does next, as follows:
NDIS_STATUS_SUCCESS
If this is set on return from a miniport's call to NdisMIndicateReceivePacket, the miniport driver regains ownership of the following:The packet descriptor
The associated out-of-band data block associated with the packet descriptor and of any media-specific information buffer specified in this block
All buffers mapped by buffer descriptors chained to the packet descriptor
The driver can prepare these descriptors, the out-of-band block, and media-specific information buffer, if any, for reuse in subsequent receive indications immediately.
NDIS_STATUS_PENDING
If this is set on return from NdisMIndicateReceivePacket, protocols retain ownership of the packet descriptor, of its associated out-of-band data block and of any buffer specified in this block, and of all buffers mapped by buffer descriptors chained to the packet descriptor until the packet descriptor is returned to the indicating driver's MiniportReturnPacket function. However, protocols are given read-only access to these miniport driver-allocated resources.
When the MiniportSendPackets function sets the Status for an incoming send packet to anything other than NDIS_STATUS_PENDING or NDIS_STATUS_RESOURCES, it completes the packet and relinquishes ownership to all resources specified by the associated packet descriptor. NDIS returns the packet descriptor to the ProtocolSendComplete function of the allocating driver and propagates the miniport driver-set status value as an input parameter to ProtocolSendComplete. Otherwise, the underlying driver will call NdisMSendComplete with the packet descriptor and final status when the asynchronous send operation is done.
Protocol drivers should never test the Status value in an associated out-of-band data block on return from NdisSendPackets or NdisSend. NDIS or the underlying driver retains ownership of the packet descriptor, of the associated out-of-band block and any buffers specified in this block, and of all buffers mapped by buffer descriptors chained to the packet descriptor until the ProtocolSendComplete function is called with the packet descriptor.
Requirements
Target platform |
Desktop |
Header |
Ndis.h (include Ndis.h) |
IRQL |
<= DISPATCH_LEVEL |
See also
NdisMAllocateSharedMemoryAsync
NDIS_SET_PACKET_MEDIA_SPECIFIC_INFO