REMOTE_NDIS_RESET_MSG (Windows CE 5.0)
This message is sent by the host to a Remote NDIS device to reset the device and return status. The host may send REMOTE_NDIS_RESET_MSG to the device through the control channel at any time that the device is in either the rndis-initialized or rndis-data-initialized state. The Remote NDIS device responds to this message by sending a REMOTE_NDIS_RESET_CMPLT to the host.
REMOTE_NDIS_RESET_MSG(UINT32)NdisMessageType;(UINT32)MessageLength;(UINT32)Reserved;
Parameters
- NdisMessageType
Specifies the RNDIS message type, which is set to REMOTE_NDIS_RESET_MSG. - MessageLength
Specifies the total length of this RNDIS message in bytes. - Reserved
Set to 0. Reserved.
Return Values
None.
Remarks
All RNDIS messages start with two UINT32 fields, NdisMessageType and MessageLength that identify the type of message being sent and its length. All messages that expect a response from a remote device and all responses to such messages from a remote device also include a third UINT32 field, RequestId, that is used to match device responses to host sent messages.
Requirements
OS Versions: Windows CE .NET 4.0 and later.
Header: Rndis.h.
See Also
Send Feedback on this topic to the authors