Calibration Abort Test (Compact 2013)
3/26/2014
The Calibration Abort Test tests the TouchPanelReadCalibrationAbort function that aborts a TouchPanelReadCalibrationPoint function call. The test requires that you do not touch the touch panel during the test. This test fails if the TouchPanelReadCalibrationPoint function call succeeds. Failure may occur if you touch the touch panel. This test is skipped if the touch panel driver does not export a TouchPanelReadCalibrationPoint or TouchPanelReadCalibrationAbort function.
This is test 1005 in the touchfunc.dll test suite.
Note: For most tests, the touch panel driver level test requires user interaction by using a touch pen on the touch panel. After a test is complete, the OS loses control of the touch panel. Download a new image before you run any more tests.
Test Prerequisites
Your device must meet the following requirements before you run this test.
The following table shows the device hardware requirements for this test.
Requirement |
Description |
|---|---|
Touch Panel |
Touch screen with or without cursor support. |
The following table shows the device software requirements for the Touch Driver test.
Requirements |
Description |
|---|---|
Tux.exe |
Tux test harness, required for executing the test |
Kato.dll |
Kato logging engine, required for logging test data |
Ktux.dll |
Tux harness library required to run tests in kernel mode |
TouchFunc.dll |
Library containing test files |
Subtests
This test has no subtests.
Setting Up the Test
This test has no additional setup requirements beyond the standard test environment setup.
Running the Test
This test requires that you interact with the touch panel. You must follow the instructions on the display to run the test correctly. When the test prompts you, you must perform the requested action. If you do not complete the action, the test times out and fails. The test times out after approximately 15 seconds.
The default command line is:
tux -o -n -d touchfunc.dll -x1005
Verifying the Test
In some cases, the test requires that you select 'Yes' or 'No' in response to a question. To respond, you must tap the part of the touch panel that contains the appropriate response.
Troubleshooting the Test
When you complete the test, the operating system does not regain control of the touch panel. You must reset the touch panel to restore usual operation.