CIM_SwitchPort class
Represents a switch port that sends and receives data frames.
The following syntax is simplified from Managed Object Format (MOF) code and includes all of the inherited properties.
Syntax
[Abstract, Version("2.7.0"), UMLPackagePath("CIM::Network::ProtocolEndpoints")]
class CIM_SwitchPort : CIM_ProtocolEndpoint
{
string InstanceID;
string Caption;
string ElementName;
datetime InstallDate;
string StatusDescriptions[];
string Status;
uint16 HealthState;
uint16 CommunicationStatus;
uint16 DetailedStatus;
uint16 OperatingStatus;
uint16 PrimaryStatus;
string OtherEnabledState;
uint16 RequestedState = 12;
uint16 EnabledDefault = 2;
uint16 AvailableRequestedStates[];
uint16 TransitioningToState = 12;
string SystemCreationClassName;
string SystemName;
string CreationClassName;
string Description;
uint16 OperationalStatus[];
uint16 EnabledState;
datetime TimeOfLastStateChange;
string Name;
string NameFormat;
uint16 ProtocolType;
uint16 ProtocolIFType;
string OtherTypeDescription;
uint16 PortNumber;
};
Members
The CIM_SwitchPort class has these types of members:
Methods
The CIM_SwitchPort class has these methods.
| Method | Description |
|---|---|
| RequestStateChange | Requests that the state of the element be changed to the specified value. This method is inherited from CIM_EnabledLogicalElement. |
Properties
The CIM_SwitchPort class has these properties.
-
AvailableRequestedStates
-
-
Data type: uint16 array
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.RequestStateChange", "CIM_EnabledLogicalElementCapabilities.RequestedStatesSupported")
Indicates the possible values for the RequestedState parameter of the RequestStateChange method.
The listed values must be a subset of the values that are contained in the RequestedStatesSupported property of the associated CIM_EnabledLogicalElementCapabilities instance. This property is NULL if the implementation cannot determine the set of possible values for the current state of the element.
This property is inherited from CIM_EnabledLogicalElement.
The possible values are.
-
-
Enabled (2)
-
Disabled (3)
-
Shut Down (4)
-
Offline (6)
-
Test (7)
-
Defer (8)
-
Quiesce (9)
-
Reboot (10)
-
Reset (11)
-
DMTF Reserved
- 12 65535
Caption
-
Data type: string
-
Access type: Read-only
-
Qualifiers: MaxLen (64)
A short textual description of the object.
This property is inherited from CIM_ManagedElement.
CommunicationStatus
-
Data type: uint16
-
Access type: Read-only
Indicates the ability of the instrumentation to communicate with this element. A NULL value indicates that instrumentation does not support this property.
This property is inherited from CIM_ManagedSystemElement.
Unknown (0)
Indicates that the instrumentation cannot report on the CommunicationStatus property at this time.
Not Available (1)
Indicates that the instrumentation is capable of reporting this property, but intentionally does not for this element.
Communication OK (2)
Indicates only that communication is established with the element.
Lost Communication (3)
Indicates that the element has been contacted in the past, but is currently unreachable.
No Contact (4)
Indicates that the instrumentation has contact information for this element, but has never been able to communicate with it.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
CreationClassName
The class name used to create an instance of this class. CreationClassName is combined with other key properties of this class to uniquely identify instances of this class and its subclasses.
This property is inherited from CIM_ServiceAccessPoint.
Description
-
Data type: string
-
Access type: Read-only
-
Qualifiers: MappingStrings ("MIB.IETF|IF-MIB.ifDescr")
A textual description of the object.
This property is inherited from CIM_ProtocolEndpoint.
DetailedStatus
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.PrimaryStatus", "CIM_ManagedSystemElement.HealthState")
Indicates additional status details that complement the PrimaryStatus property. A NULL value indicates that the instrumentation does not support this property.
This property is inherited from CIM_ManagedSystemElement.
Not Available (0)
Indicates that the instrumentation is capable of reporting this property, but intentionally does not report it for this element.
No Additional Information (1)
Indicates that no details have to be added to the PrimaryStatus property, for example when the PrimaryStatus is set to OK.
Stressed (2)
Indicates that the element functions, but requires attention. Overload and overheated are examples of Stressed states.
Predictive Failure (3)
Indicates that an element functions nominally, but predicts a failure in the near future.
Non-Recoverable Error (4)
Indicates that this element is in an error condition that requires human intervention.
Supporting Entity in Error (5)
Indicates that an element on which this element depends is in error. This element might be OK but cannot function because of the state of a dependent element. An example is a network service or endpoint that cannot function due to lower-layer networking problems.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
ElementName
-
Data type: string
-
Access type: Read-only
A user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information.
This property is inherited from CIM_ManagedElement.
EnabledDefault
-
Data type: uint16
-
Access type: Read/write
Indicates an administrator's default or startup configuration for the enabled state of an element. The default value Enabled (2).
This property is inherited from CIM_EnabledLogicalElement.
The possible values are.
Enabled (2)
Disabled (3)
Not Applicable (5)
Enabled but Offline (6)
No Default (7)
Quiesce (9)
DMTF Reserved
Vendor Reserved
EnabledState
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: MappingStrings ("MIB.IETF|IF-MIB.ifAdminStatus")
The enabled state of an element.
This property is inherited from CIM_ProtocolEndpoint.
The possible values are:
Unknown (0)
The element is in an unknown state.
Other (1)
The element is in a known state that is not defined by other possible values.
Enabled (2)
The element can execute, process, and queue commands.
Disabled (3)
The element will drop commands and requests.
Shutting Down (4)
The element is in a transition to a disabled state.
Not Applicable (5)
The element does not support being enabled or disabled.
Enabled but Offline (6)
The element might be completing commands, and new requests are dropped.
In Test (7)
The element is in a test state.
Deferred (8)
The element is processing commands and queuing new requests.
Quiesce (9)
The element is in an enabled state, but with restricted capabilities.
Starting (10)
The element is in a transition to an enabled state, and new requests are queued.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
HealthState
-
Data type: uint16
-
Access type: Read-only
Indicates the current health of the element. This attribute expresses the health of this element, but not necessarily the health of its subcomponents.
This property is inherited from CIM_ManagedSystemElement.
Unknown (0)
The implementation cannot report on HealthState at this time.
OK (5)
The element is fully functional and operates within normal operational parameters and without error.
Degraded/Warning (10)
The element is in working order, and all functionality is provided. However, the element does not function to the best of its abilities. For example, the element might not operate at optimal performance, or it might report recoverable errors.
Minor failure (15)
All functionality is available, but some functionality might be degraded.
Major failure (20)
The element is failing. It is possible that some or all of the functionality of this component is degraded or does not work.
Critical failure (25)
The element is nonfunctional, and recovery might not be possible.
Non-recoverable error (30)
The element has completely failed, and recovery is not possible. All functionality that this element provides has been lost.
DMTF Reserved
Reserved.
InstallDate
-
Data type: datetime
-
Access type: Read-only
-
Qualifiers: MappingStrings ("MIF.DMTF|ComponentID|001.5")
Indicates when the object was installed. The lack of a value does not indicate that the object is not installed.
This property is inherited from CIM_ManagedSystemElement.
InstanceID
-
Data type: string
-
Access type: Read-only
Uniquely and opaquely identifies an instance of this class within the scope of the containing namespace.
[!Important]
In order to ensure uniqueness within the namespace, the value of the InstanceID property should be constructed in the following pattern: OrgID:LocalID
OrgID must include a copyrighted, trademarked or otherwise unique name that is owned by the business entity that defines the InstanceID, or be a registered ID that is assigned by a recognized global authority. This pattern is similar to the structure of schema class names. In addition, to ensure uniqueness, the first colon in InstanceID must be between the OrgID andLocalID. Therefore the OrgID must not contain a colon (':').
LocalID is chosen by the business entity and should not be re-used to identify different underlying real-world elements.
If the above pattern is not used, the defining entity must assure that the resultant InstanceID value is not re-used across any InstanceID properties that are produced by this provider or other providers for this namespace.
For Distributed Management Task Force (DMTF) defined instances, the pattern must be used with the OrgID set to CIM.
This property is inherited from CIM_ManagedElement.
Name
-
Data type: string
-
Access type: Read-only
-
Qualifiers: MaxLen (256)
A unique identifier of the protocol endpoint that indicates the managed functionality. The naming convention for this property is defined in the NameFormat property.
This property is inherited from CIM_ProtocolEndpoint.
NameFormat
-
Data type: string
-
Access type: Read-only
-
Qualifiers: MaxLen (256)
The naming convention used by the Name property to ensure that Name values are unique. For example, you can append the ProtocolIFType property value to the beginning of the name followed by an underscore.
This property is inherited from CIM_ProtocolEndpoint.
OperatingStatus
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.EnabledState")
Indicates the current operational condition of the element. This property can be used to provide more detail about the value of the EnabledState property. A NULL value indicates that the instrumentation does not support this property.
This property is inherited from CIM_ManagedSystemElement.
Unknown (0)
Indicates that the instrumentation cannot report on the OperatingStatus property at this time.
Not Available (1)
Indicates that the instrumentation is capable of reporting this property, but intentionally does not report it for this element.
Servicing (2)
Indicates that the element is in process to be configured, maintained, cleaned, or otherwise administered.
Starting (3)
Indicates that the element is being initialized.
Stopping (4)
Indicates that the element is being brought to an orderly stop.
Stopped (5)
Indicates that the element is intentionally stopped.
Aborted (6)
Indicates that the element stopped in an unexpected way.
Dormant (7)
Indicates that the element is inactive.
Completed (8)
Indicates that the element completed its operation. We recommend using a PrimaryStatus property value of OK, Error, or Degraded to indicate success or failure of the operation.
Migrating (9)
Indicates that the element is being moved between host elements.
Emigrating (10)
Indicates that the element is being moved away from the host element.
Immigrating (11)
Indicates that the element is being moved to a new host element.
Snapshotting (12)
Indicates that a snapshot copy of the element is being created.
Shutting Down (13)
Indicates that the element is being brought to an abrupt stop.
In Test (14)
Indicates that the element is performing test functions.
Transitioning (15)
Indicates that the element is between states and is not fully available in either state. Use another value that indicates a more specific transition if one is available.
In Service (16)
Indicates that the element is in service and operational.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
OperationalStatus
-
Data type: uint16 array
-
Access type: Read-only
-
Qualifiers: MappingStrings ("MIB.IETF|IF-MIB.ifOperStatus")
An array that contains the current status of the element. The first value of the OperationalStatus array should contain the primary status for the element.
This property is inherited from CIM_ProtocolEndpoint.
The possible values are:
Unknown (0)
The implementation cannot report the status at this time.
Other (1)
An undefined state.
OK (2)
Full functionality without errors.
Degraded (3)
The element is in working order and that all functionality is provided. However, the element does not function to the best of its abilities. For example, the element might not operate at optimal performance, or it might report recoverable errors.
Stressed (4)
The element functions, but requires attention. Overload and overheated are examples of Stressed states.
Predictive Failure (5)
The element functions nominally, will probably fail in the near future.
Error (6)
An error has occurred.
Non-Recoverable Error (7)
A nonrecoverable error has occurred.
Starting (8)
The job is starting.
Stopping (9)
The job is stopping.
Stopped (10)
The element has been intentionally stopped.
In Service (11)
The element is in process to be configured, maintained, cleaned, or otherwise administered.
No Contact (12)
The monitoring system has information about this element, but has never been able to establish communications with it.
Lost Communication (13)
The monitoring system has successfully contacted this element in the past, but it is currently unavailable.
Aborted (14)
The job stopped in an unexpected way. The state and configuration of the job might require an update.
Dormant (15)
The job is inactive.
Supporting Entity in Error (16)
An element on which this job depends is in error. This element might be OK but cannot function because of the state of a dependent element. An example is a network service or endpoint that cannot function due to lower-layer networking problems.
Completed (17)
The job has completed its operation. This value should be combined with either OK, Error, or Degraded to indicate to a client whether the complete operation Completed with OK and passed, or completed with Error and failed, or completed with Degraded and finished the operation, but did not complete OK or did not report an error.
Power Mode (18)
The element has additional power model information that is contained in the associated power management service.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
OtherEnabledState
-
Data type: string
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.EnabledState")
Describes the state of the element when the value of the EnabledState property is Other. This property must be set to NULL when EnabledState is not Other.
This property is inherited from CIM_EnabledLogicalElement.
OtherTypeDescription
-
Data type: string
-
Access type: Read-only
-
Qualifiers: MaxLen (64), ModelCorrespondence ("CIM_ProtocolEndpoint.ProtocolType", "CIM_ProtocolEndpoint.ProtocolIFType")
A description of a network protocol type that is used when the ProtocolIFType property is set to "1" (Other); otherwise, this value should be set to null.
This property is inherited from CIM_ProtocolEndpoint.
PortNumber
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: MappingStrings ("MIB.IETF|BRIDGE-MIB.dot1dPort")
The numeric identifier of the switch port.
PrimaryStatus
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_ManagedSystemElement.DetailedStatus", "CIM_ManagedSystemElement.HealthState")
Indicates a high-level status value.
This property is inherited from CIM_ManagedSystemElement.
The possible values are.
Unknown (0)
OK (1)
Degraded (2)
Error (3)
DMTF Reserved
Vendor Reserved
ProtocolIFType
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: MappingStrings ("MIB.IETF|IF-MIB.ifType"), ModelCorrespondence ("CIM_ProtocolEndpoint.OtherTypeDescription")
An enumeration used to categorize and classify different instances of this class. The possible values for this property are synchronized with the Internet Assigned Numbers Authority (IANA) ifType MIB-module (management information base), which is maintained at http://www.iana.org/assignments/ianaiftype-mib. Additional values defined by the DMTF are included.
Note
If the ProtocolIFType is set to 1 (Other), then the protocol type information should be provided in the OtherTypeDescription property.
This property is inherited from CIM_ProtocolEndpoint.
Unknown (0)
Other (1)
Regular 1822 (2)
HDH 1822 (3)
DDN X.25 (4)
RFC877 X.25 (5)
Ethernet CSMA/CD (6)
ISO 802.3 CSMA/CD (7)
ISO 802.4 Token Bus (8)
ISO 802.5 Token Ring (9)
ISO 802.6 MAN (10)
StarLAN (11)
Proteon 10Mbit (12)
Proteon 80Mbit (13)
HyperChannel (14)
FDDI (15)
LAP-B (16)
SDLC (17)
DS1 (18)
E1 (19)
Basic ISDN (20)
Primary ISDN (21)
Proprietary Point-to-Point Serial (22)
PPP (23)
Software Loopback (24)
EON (25)
Ethernet 3Mbit (26)
NSIP (27)
SLIP (28)
Ultra (29)
DS3 (30)
SIP (31)
Frame Relay (32)
RS-232 (33)
Parallel (34)
ARCNet (35)
ARCNet Plus (36)
ATM (37)
MIO X.25 (38)
SONET (39)
X.25 PLE (40)
ISO 802.211c (41)
LocalTalk (42)
SMDS DXI (43)
Frame Relay Service (44)
V.35 (45)
HSSI (46)
HIPPI (47)
Modem (48)
AAL5 (49)
SONET Path (50)
SONET VT (51)
SMDS ICIP (52)
Proprietary Virtual/Internal (53)
Proprietary Multiplexor (54)
IEEE 802.12 (55)
Fibre Channel (56)
HIPPI Interface (57)
Frame Relay Interconnect (58)
ATM Emulated LAN for 802.3 (59)
ATM Emulated LAN for 802.5 (60)
ATM Emulated Circuit (61)
Fast Ethernet (100BaseT) (62)
ISDN (63)
V.11 (64)
V.36 (65)
G703 at 64K (66)
G703 at 2Mb (67)
QLLC (68)
Fast Ethernet 100BaseFX (69)
Channel (70)
IEEE 802.11 (71)
IBM 260/370 OEMI Channel (72)
ESCON (73)
Data Link Switching (74)
ISDN S/T Interface (75)
ISDN U Interface (76)
LAP-D (77)
IP Switch (78)
Remote Source Route Bridging (79)
ATM Logical (80)
DS0 (81)
DS0 Bundle (82)
BSC (83)
Async (84)
Combat Net Radio (85)
ISO 802.5r DTR (86)
Ext Pos Loc Report System (87)
AppleTalk Remote Access Protocol (88)
Proprietary Connectionless (89)
ITU X.29 Host PAD (90)
ITU X.3 Terminal PAD (91)
Frame Relay MPI (92)
ITU X.213 (93)
ADSL (94)
RADSL (95)
SDSL (96)
VDSL (97)
ISO 802.5 CRFP (98)
Myrinet (99)
Voice Receive and Transmit (100)
Voice Foreign Exchange Office (101)
Voice Foreign Exchange Service (102)
Voice Encapsulation (103)
Voice over IP (104)
ATM DXI (105)
ATM FUNI (106)
ATM IMA (107)
PPP Multilink Bundle (108)
IP over CDLC (109)
IP over CLAW (110)
Stack to Stack (111)
Virtual IP Address (112)
MPC (113)
IP over ATM (114)
ISO 802.5j Fibre Token Ring (115)
TDLC (116)
Gigabit Ethernet (117)
HDLC (118)
LAP-F (119)
V.37 (120)
X.25 MLP (121)
X.25 Hunt Group (122)
Transp HDLC (123)
Interleave Channel (124)
FAST Channel (125)
IP (for APPN HPR in IP Networks) (126)
CATV MAC Layer (127)
CATV Downstream (128)
CATV Upstream (129)
Avalon 12MPP Switch (130)
Tunnel (131)
Coffee (132)
Circuit Emulation Service (133)
ATM SubInterface (134)
Layer 2 VLAN using 802.1Q (135)
Layer 3 VLAN using IP (136)
Layer 3 VLAN using IPX (137)
Digital Power Line (138)
Multimedia Mail over IP (139)
DTM (140)
DCN (141)
IP Forwarding (142)
MSDSL (143)
IEEE 1394 (144)
IF-GSN/HIPPI-6400 (145)
DVB-RCC MAC Layer (146)
DVB-RCC Downstream (147)
DVB-RCC Upstream (148)
ATM Virtual (149)
MPLS Tunnel (150)
SRP (151)
Voice over ATM (152)
Voice over Frame Relay (153)
ISDL (154)
Composite Link (155)
SS7 Signaling Link (156)
Proprietary P2P Wireless (157)
Frame Forward (158)
RFC1483 Multiprotocol over ATM (159)
USB (160)
IEEE 802.3ad Link Aggregate (161)
BGP Policy Accounting (162)
FRF .16 Multilink FR (163)
H.323 Gatekeeper (164)
H.323 Proxy (165)
MPLS (166)
Multi-Frequency Signaling Link (167)
HDSL-2 (168)
S-HDSL (169)
DS1 Facility Data Link (170)
Packet over SONET/SDH (171)
DVB-ASI Input (172)
DVB-ASI Output (173)
Power Line (174)
Non Facility Associated Signaling (175)
TR008 (176)
GR303 RDT (177)
GR303 IDT (178)
ISUP (179)
Proprietary Wireless MAC Layer (180)
Proprietary Wireless Downstream (181)
Proprietary Wireless Upstream (182)
HIPERLAN Type 2 (183)
Proprietary Broadband Wireless Access Point to Mulipoint (184)
SONET Overhead Channel (185)
Digital Wrapper Overhead Channel (186)
ATM Adaptation Layer 2 (187)
Radio MAC (188)
ATM Radio (189)
Inter Machine Trunk (190)
MVL DSL (191)
Long Read DSL (192)
Frame Relay DLCI Endpoint (193)
ATM VCI Endpoint (194)
Optical Channel (195)
Optical Transport (196)
Proprietary ATM (197)
Voice over Cable (198)
Infiniband (199)
TE Link (200)
Q.2931 (201)
Virtual Trunk Group (202)
SIP Trunk Group (203)
SIP Signaling (204)
CATV Upstream Channel (205)
Econet (206)
FSAN 155Mb PON (207)
FSAN 622Mb PON (208)
Transparent Bridge (209)
Line Group (210)
Voice E&M Feature Group (211)
Voice FGD EANA (212)
Voice DID (213)
MPEG Transport (214)
6To4 (215)
GTP (216)
Paradyne EtherLoop 1 (217)
Paradyne EtherLoop 2 (218)
Optical Channel Group (219)
HomePNA (220)
GFP (221)
ciscoISLvlan (222)
actelisMetaLOOP (223)
Fcip (224)
IANA Reserved
IPv4 (4096)
IPv6 (4097)
IPv4/v6 (4098)
IPX (4099)
DECnet (4100)
SNA (4101)
CONP (4102)
CLNP (4103)
VINES (4104)
XNS (4105)
ISDN B Channel Endpoint (4106)
ISDN D Channel Endpoint (4107)
BGP (4108)
OSPF (4109)
UDP (4110)
TCP (4111)
802.11a (4112)
802.11b (4113)
802.11g (4114)
802.11h (4115)
NFS (4200)
CIFS (4201)
DAFS (4202)
WebDAV (4203)
HTTP (4204)
FTP (4205)
NDMP (4300)
Telnet (4400)
SSH (4401)
SM CLP (4402)
SMTP (4403)
LDAP (4404)
RDP (4405)
HTTPS (4406)
DMTF Reserved
Vendor Reserved
ProtocolType
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: Deprecated ("CIM_ProtocolEndpoint.ProtocolIFType"), ModelCorrespondence ("CIM_ProtocolEndpoint.OtherTypeDescription")
Note
Deprecated description: An enumeration used to categorize and classify different instances of this class.
This property is deprecated. Instead, use the ProtocolIFType property.
This property is inherited from CIM_ProtocolEndpoint.
Unknown (0)
Other (1)
IPv4 (2)
IPv6 (3)
IPX (4)
AppleTalk (5)
DECnet (6)
SNA (7)
CONP (8)
CLNP (9)
VINES (10)
XNS (11)
ATM (12)
Frame Relay (13)
Ethernet (14)
TokenRing (15)
FDDI (16)
Infiniband (17)
Fibre Channel (18)
ISDN BRI Endpoint (19)
ISDN B Channel Endpoint (20)
ISDN D Channel Endpoint (21)
IPv4/v6 (22)
BGP (23)
OSPF (24)
MPLS (25)
UDP (26)
TCP (27)
RequestedState
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.EnabledState")
Indicates the last requested state for the element. The current state is indicated by the EnabledState property. This property enables you to compare the last requested and current states.
Note
When the value of the EnabledState property is Not Applicable, this property has no meaning.
This property is inherited from CIM_EnabledLogicalElement.
Unknown (0)
Indicates the last requested state for the element is unknown.
Enabled (2)
Indicates that the element executes or could execute commands, processes any queued commands, and queues new requests.
Disabled (3)
Indicates a request to immediately disable the element, such that it does not execute or accept any commands or processing requests.
Shut Down (4)
Indicates a request for an orderly transition to the Disabled state, and might require you to shut off the power to completely erase any existing state.
No Change (5)
No state change has been requested.
Offline (6)
Indicates a request to change to the Enabled but Offline state.
Test (7)
Indicates that the element is in a test state.
Deferred (8)
Indicates that the element might be completing commands, but that it queues any new requests.
Quiesce (9)
Indicates that the element is enabled but is in a restricted mode.
Reboot (10)
Indicates a request to shut down and then change to an Enabled state.
Reset (11)
Indicates a request to change to a Disabled state and then change to an Enabled state.
Not Applicable (12)
Indicates that this instance does not support the RequestedState property.
DMTF Reserved
Reserved.
Vendor Reserved
Reserved.
Status
-
Data type: string
-
Access type: Read-only
-
Qualifiers: Deprecated ("CIM_ManagedSystemElement.OperationalStatus"), MaxLen (10)
Indicates the primary status of the object.
Note
This property is deprecated. It is replaced by the OperationalStatus property. If you choose to use the Status property for backward compatibility, it should be secondary to the OperationalStatus property.
This property is inherited from CIM_ManagedSystemElement.
The possible values are.
("OK")
("Error")
("Degraded")
("Unknown")
("Pred Fail")
("Starting")
("Stopping")
("Service")
("Stressed")
("NonRecover")
("No Contact")
("Lost Comm")
("Stopped")
StatusDescriptions
-
Data type: string array
-
Access type: Read-only
-
Qualifiers: ArrayType ("Indexed"), ModelCorrespondence ("CIM_ManagedSystemElement.OperationalStatus")
Indicates descriptions of the corresponding values in the OperationalStatus array. For example, if an element in the OperationalStatus property contains the value Stopping, then the element at the same array index in this property might contain an explanation as to why an object is being stopped.
This property is inherited from CIM_ManagedSystemElement.
SystemCreationClassName
-
Data type: string
-
Access type: Read-only
-
Qualifiers: Key, MaxLen (256), Propagated ("CIM_System.CreationClassName")
The class name used to create an instance of the system that contains the SAP. SystemCreationClassName is combined with other key properties of this class to uniquely identify instances of this class and its subclasses.
This property is inherited from CIM_ServiceAccessPoint.
SystemName
-
Data type: string
-
Access type: Read-only
-
Qualifiers: Key, MaxLen (256), Propagated ("CIM_System.Name")
The name of the system that contains the SAP.
This property is inherited from CIM_ServiceAccessPoint.
TimeOfLastStateChange
-
Data type: datetime
-
Access type: Read-only
-
Qualifiers: MappingStrings ("MIB.IETF|IF-MIB.ifLastChange")
The date and time when the EnabledState property last changed. If EnabledState has not changed and this property is populated, then it must be set to a zero interval value. If a state change was requested, but rejected or not yet processed, the property must not be updated.
This property is inherited from CIM_ProtocolEndpoint.
TransitioningToState
-
Data type: uint16
-
Access type: Read-only
-
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.RequestStateChange", "CIM_EnabledLogicalElement.RequestedState", "CIM_EnabledLogicalElement.EnabledState")
Indicates the target state to which the instance is changing.
A value of No Change indicates that no transition is in progress. A value of Not Applicable indicates that the implementation does not report ongoing transitions.
This property is inherited from CIM_EnabledLogicalElement.
The possible values are.
Unknown (0)
Enabled (2)
Disabled (3)
Shut Down (4)
No Change (5)
Offline (6)
Test (7)
Defer (8)
Quiesce (9)
Reboot (10)
Reset (11)
Not Applicable (12)
DMTF Reserved
Requirements
| Minimum supported client |
None supported |
| Minimum supported server |
Windows Server 2016 |
| Namespace |
Root\HyperVCluster\v2 |
| MOF |
|
| DLL |
|