How to: Define a Gesture Handler on a Modeling Diagram

Artículo
04/28/2015

In Visual Studio Ultimate, you can define commands that are performed when the user double-clicks or drags items onto a UML diagram. You can package these extensions into a Visual Studio Integration Extension (VSIX) and distribute it to other Visual Studio Ultimate users.

If there is already a built-in behavior for the type of diagram and the type of element that you want to drag, you might not be able to add to or override this behavior.

Requirements

Visual Studio SDK, which you can obtain from Visual Studio Gallery.
Visual Studio Visualization and Modeling SDK, which you can obtain from Visual Studio Visualization and Modeling SDK on Code Gallery.

Creating a Gesture Handler

To define a gesture handler for a UML designer, you must create a class that defines the behavior of the gesture handler, and embed that class in a Visual Studio Integration Extension (VSIX). The VSIX acts as a container that can install the handler. There are two alternative methods of defining a gesture handler:

Create a gesture handler in its own VSIX using a project template. This is the quicker method. Use it if you do not want to combine your handler with other types of extension such as validation extensions, custom toolbox items, or menu commands.
Create separate gesture handler and VSIX projects. Use this method if you want to combine several types of extension into the same VSIX. For example, if your gesture handler expects the model to observe specific constraints, you could embed it into the same VSIX as a validation method.

To create a gesture handler in its own VSIX

In the New Project dialog box, under Modeling Projects, select Gesture Extension.
Open the .cs file in the new project and modify the GestureExtension class to implement your gesture handler.

For more information, see Implementing the Gesture Handler.
Test the gesture handler by pressing F5. For more information, see Executing the Gesture Handler.
Install the gesture handler on another computer by copying the file bin\*\*.vsix that is built by your project. For more information, see Installing the Gesture Handler.

Here is the alternative procedure:

To create a separate class library (DLL) project for the gesture handler

Create a Class Library project, either in a new Visual Studio solution, or in an existing solution.
1. On the File menu, choose New, Project.
2. Under Installed Templates, expand Visual C# or Visual Basic, then in the middle column choose Class Library.
Add the following references to your project.

Microsoft.VisualStudio.Modeling.Sdk.12.0

Microsoft.VisualStudio.Modeling.Sdk.Diagrams.12.0

Microsoft.VisualStudio.ArchitectureTools.Extensibility

Microsoft.VisualStudio.Uml.Interfaces

System.ComponentModel.Composition

System.Windows.Forms

Microsoft.VisualStudio.ArchitectureTools.Extensibility.Layer – You need this only if you are extending Layer diagrams. For more information, see Extending Layer Diagrams.

Add a class file to the project and set its content to the following code.

Note

Change the namespace and class name according to your preference.

using System.ComponentModel.Composition;
using System.Linq;
using System.Collections.Generic;
using Microsoft.VisualStudio.Modeling.Diagrams;
using Microsoft.VisualStudio.Modeling.Diagrams.ExtensionEnablement;
using Microsoft.VisualStudio.Modeling.ExtensionEnablement;
using Microsoft.VisualStudio.ArchitectureTools.Extensibility.Uml;
using Microsoft.VisualStudio.ArchitectureTools.Extensibility.Presentation;
using Microsoft.VisualStudio.Uml.AuxiliaryConstructs;
using Microsoft.VisualStudio.Modeling;
using Microsoft.VisualStudio.Uml.Classes;
// ADD other UML namespaces if required

namespace MyGestureHandler // CHANGE
{
  // DELETE any of these attributes if the handler
  // should not work with some types of diagram.
  [ClassDesignerExtension]
  [ActivityDesignerExtension]
  [ComponentDesignerExtension]
  [SequenceDesignerExtension]
  [UseCaseDesignerExtension]
  // [LayerDesignerExtension]

  // Gesture handlers must export IGestureExtension:
  [Export(typeof(IGestureExtension))]
  // CHANGE class name
  public class MyGesture1 : IGestureExtension
  {
    [Import]
    public IDiagramContext DiagramContext { get; set; }

    /// <summary>
    /// Called when the user double-clicks on the diagram
    /// </summary>
    /// <param name="targetElement"></param>
    /// <param name="diagramPointEventArgs"></param>
    public void OnDoubleClick(ShapeElement targetElement, DiagramPointEventArgs diagramPointEventArgs)
    {
      // CHANGE THIS CODE FOR YOUR APPLICATION.

      // Get the target shape, if any. Null if the target is the diagram.
      IShape targetIShape = targetElement.CreateIShape();

      // Do something...
    }

    /// <summary>
    /// Called repeatedly when the user drags from anywhere on the screen.
    /// Return value should indicate whether a drop here is allowed.
    /// </summary>
    /// <param name="targetMergeElement">References the element to be dropped on.</param>
    /// <param name="diagramDragEventArgs">References the element to be dropped.</param>
    /// <returns></returns>
    public bool CanDragDrop(ShapeElement targetMergeElement, DiagramDragEventArgs diagramDragEventArgs)
    {
      // CHANGE THIS CODE FOR YOUR APPLICATION.

      // Get the target element, if any. Null if the target is the diagram.
      IShape targetIShape = targetMergeElement.CreateIShape();

      // This example allows drag of any UML elements.
      return GetModelElementsFromDragEvent(diagramDragEventArgs).Count() > 0;
    }


    /// <summary>
    /// Execute the action to be performed on the drop.
    /// </summary>
    /// <param name="targetDropElement"></param>
    /// <param name="diagramDragEventArgs"></param>
    public void OnDragDrop(ShapeElement targetDropElement, DiagramDragEventArgs diagramDragEventArgs)
    {
      // CHANGE THIS CODE FOR YOUR APPLICATION.
    }

    /// <summary>
    /// Retrieves UML IElements from drag arguments.
    /// Works for drags from UML diagrams.
    /// </summary>
    private IEnumerable<IElement> GetModelElementsFromDragEvent
            (DiagramDragEventArgs dragEvent)
    {
      //ElementGroupPrototype is the container for
      //dragged and copied elements and toolbox items.
      ElementGroupPrototype prototype =
         dragEvent.Data.
         GetData(typeof(ElementGroupPrototype))
              as ElementGroupPrototype;
      // Locate the originals in the implementation store.
      IElementDirectory implementationDirectory =
         dragEvent.DiagramClientView.Diagram.Store.ElementDirectory;

      return prototype.ProtoElements.Select(
        prototypeElement =>
        {
          ModelElement element = implementationDirectory
            .FindElement(prototypeElement.ElementId);
          ShapeElement shapeElement = element as ShapeElement;
          if (shapeElement != null)
          {
            // Dragged from a diagram.
            return shapeElement.ModelElement as IElement;
          }
          else
          {
            // Dragged from UML Model Explorer.
            return element as IElement;
          }
        });
    }

  }
}

For more information about what to put in the methods, see Implementing the Gesture Handler.

You must add your menu command to a VSIX project, which acts as a container for installing the command. If you want, you can include other components in the same VSIX.

To add a separate gesture handler to a VSIX project

You do not need this procedure if you have created the gesture handler with its own VSIX.
Create a VSIX project, unless your solution already has one.
1. In Solution Explorer, on the shortcut menu of the solution, choose Add, New Project.
2. Under Installed Templates, expand Visual C# or Visual Basic, then select Extensibility. In the middle column, choose VSIX Project.
Set the VSIX project as the startup project of the solution.
- In Solution Explorer, in the shortcut menu of the VSIX project, choose Set as StartUp project.
In source.extension.vsixmanifest, add the gesture handler class library project as a MEF Component:
1. On the MetaData tab, set a name for the VSIX.
2. On the Install Targets tab, set Visual Studio Ultimate and Premium as the targets.
3. On the Assets tab, choose a New, and in the dialog box, set:
  
  Type = MEF Component
  
  Source = A project in current solution
  
  Project = Your class library project

Executing the Gesture Handler

For test purposes, execute your gesture handler in debug mode.

To test the gesture handler

Press F5, or on the Debug menu, click Start Debugging.

An experimental instance of Visual Studio starts.

Troubleshooting: If a new Visual Studio does not start:
- If you have more than one project, make sure that the VSIX project is set as the Startup project of the solution.
- In Solution Explorer, on the shortcut menu of the startup or only project, choose Properties. In the project properties editor, choose the Debug tab. Make sure that the string in the Start external program field is the full pathname of Visual Studio, typically:
  
  C:\Program Files\Microsoft Visual Studio 12.0\Common7\IDE\devenv.exe
In the experimental Visual Studio, open or create a modeling project, and open or create a modeling diagram. Use a diagram that belongs to one of the types listed in the attributes of your gesture handler class.
Double-click anywhere on the diagram. Your double-click handler should be called.
Drag an element from UML Explorer onto the diagram. Your drag handler should be called.

Troubleshooting: If the gesture handler does not work, make sure that:

The gesture handler project is listed as a MEF component in the Assets tab in source.extensions.manifest in the VSIX project.
The parameters of all the Import and Export attributes are valid.
The CanDragDrop method is not returning false.
The type of model diagram you are using (UML class, sequence, and so on) is listed as one of the gesture handler class attributes [ClassDesignerExtension], [SequenceDesignerExtension] and so on.
There is no built-in functionality already defined for this type of target and dropped element.

Implementing the Gesture Handler

The Gesture Handler Methods

The gesture handler class implements and exports IGestureExtension. The methods you need to define are as follows:

bool CanDragDrop (ShapeElement target, DiagramDragEventArgs dragEvent)

Return true to allow the source element referenced in dragEvent to be dropped on this target.

This method should not make changes to the model. It should work quickly, because it is used to determine the arrow state as the user moves the mouse.

void OnDragDrop (ShapeElement target, DiagramDragEventArgs dragEvent)

Update the model based on the source object referenced in dragEvent, and the target.

Called when the user releases the mouse after dragging.

void OnDoubleClick (ShapeElement target, DiagramPointEventArgs pointEvent)

target is the shape that the user double-clicked.

You can write handlers that can accept not only UML also a wide variety of other items, such as files, nodes in a .NET class view, Architecture Explorer nodes, and so on. The user can drag any of these items onto a UML diagram, provided you write an OnDragDrop method that can decode the serialized form of the items. The decoding methods vary from one type of item to another.

The parameters of these methods are:

ShapeElement target. The shape or diagram onto which the user has dragged something.

ShapeElement is a class in the implementation that underlies the UML modeling tools. To reduce the risk of putting the UML model and diagrams into an inconsistent state, we recommend that you do not use the methods of this class directly. Instead, wrap the element in an IShape, and then use the methods described in How to: Display a Model on Diagrams.
- To obtain an IShape:
```
IShape targetIShape = target.CreateIShape(target);
```
- To obtain the model element that is targeted by the drag or double-click operation:
```
IElement target = targetIShape.Element;
```
  You can cast this to a more specific type of element.
- To obtain the UML model store that contains the UML model:
```
IModelStore modelStore = 
  targetIShape.Element.GetModelStore(); 
```
- To obtain access to the host and service provider:
```
target.Store.GetService(typeof(EnvDTE.DTE)) as EnvDTE.DTE
```
DiagramDragEventArgs eventArgs. This parameter carries the serialized form of the source object of a drag operation:
```
System.Windows.Forms.IDataObject data = eventArgs.Data;  
```
You can drag elements of many different kinds onto a diagram, from different parts of Visual Studio, or from the Windows desktop. Different types of element are encoded in different ways in IDataObject. To extract the elements from it, refer to the documentation for the appropriate type of object.

If your source object is a UML element dragged from UML Model Explorer or from another UML diagram, refer to How to: Get UML Model Elements from IDataObject.

Writing the code of the methods

For more information about writing the code to read and update the model, see Programming with the UML API.

For information about accessing model information in a drag operation, see How to: Get UML Model Elements from IDataObject.

If you are dealing with a sequence diagram, see also How to: Edit Sequence Diagrams by Using the UML API.

In addition to the parameters of the methods, you can also declare an imported property in your class that provides access to the current diagram and model.

[Import] public IDiagramContext DiagramContext { get; set; }

The declaration of IDiagramContext allows you to write code in your methods that accesses the diagram, current selection, and model:

IDiagram diagram = this.DiagramContext.CurrentDiagram;
foreach (IShape<IElement> shape in diagram.GetSelectedShapes<IElement>)
{ IElement element = shape.Element; ... }
IModelStore modelStore = diagram.ModelStore;
IModel model = modelStore.Root;
foreach (IDiagram diagram in modelStore.Diagrams) {...}
foreach (IElement element in modelStore.AllInstances<IUseCase>) {...}

For more information, see How to: Navigate the UML Model.

Installing and uninstalling an extension

You can install a Visual Studio extension both on your own computer and on other computers.

To install an extension

In your computer, find the .vsix file that was built by your VSIX project.
1. In Solution Explorer, on the shortcut menu of the VSIX project, choose Open Folder in Windows Explorer.
2. Locate the file bin\*\YourProject.vsix
Copy the .vsix file to the target computer on which you want to install the extension. This can be your own computer or another one.

The target computer must have one of the editions of Visual Studio that you specified in source.extension.vsixmanifest.
On the target computer, open the .vsix file.

Visual Studio Extension Installer opens and installs the extension.
Start or restart Visual Studio.

To uninstall an extension

On the Tools menu, choose Extension Manager.
Expand Installed Extensions.
Select the extension, and then choose Uninstall.

Rarely, a faulty extension fails to load and creates a report in the error window, but does not appear in Extension Manager. In that case, you can remove the extension by deleting the file from:

%LocalAppData%\Local\Microsoft\VisualStudio\12.0\Extensions

Example

The following sample shows how to create lifelines in a sequence diagram, based on the parts and ports of a component, dragged from a component diagram.

To test it, press F5. An experimental instance of Visual Studio opens. In this instance, open a UML model and create a component on a component diagram. Add to this component some interfaces and internal component parts. Select the interfaces and parts. Then drag the interfaces and parts onto a sequence diagram. (Drag from the component diagram up to the tab for the sequence diagram, and then down into the sequence diagram.) A lifeline will appear for each interface and part.

For more information about binding interactions to sequence diagrams, see How to: Edit Sequence Diagrams by Using the UML API.

using System.Collections.Generic;
using System.ComponentModel.Composition;
using System.Linq;
using Microsoft.VisualStudio.Modeling;
using Microsoft.VisualStudio.Modeling.Diagrams;
using Microsoft.VisualStudio.Modeling.Diagrams.ExtensionEnablement;
using Microsoft.VisualStudio.Modeling.ExtensionEnablement;
using Microsoft.VisualStudio.ArchitectureTools.Extensibility.Uml;
using Microsoft.VisualStudio.ArchitectureTools.Extensibility.Presentation;
using Microsoft.VisualStudio.Uml.AuxiliaryConstructs;
using Microsoft.VisualStudio.Uml.Classes;
using Microsoft.VisualStudio.Uml.Interactions;
using Microsoft.VisualStudio.Uml.CompositeStructures;
using Microsoft.VisualStudio.Uml.Components;

/// <summary>
/// Creates lifelines from component ports and parts.
/// </summary>
[Export(typeof(IGestureExtension))]
[SequenceDesignerExtension]
public class CreateLifelinesFromComponentParts : IGestureExtension
{
  [Import]
  public IDiagramContext Context { get; set; }

  /// <summary>
  /// Called by the modeling framework when
  /// the user drops something on a target.
  /// </summary>
  /// <param name="target">The target shape or diagram </param>
  /// <param name="dragEvent">The item being dragged</param>
  public void OnDragDrop(ShapeElement target,
           DiagramDragEventArgs dragEvent)
  {
    ISequenceDiagram diagram = Context.CurrentDiagram
            as ISequenceDiagram;
    IInteraction interaction = diagram.Interaction;
    if (interaction == null)
    {
      // Sequence diagram is empty: create an interaction.
      interaction = diagram.ModelStore.Root.CreateInteraction();
      interaction.Name = Context.CurrentDiagram.Name;
      diagram.Bind(interaction);
    }
    foreach (IConnectableElement connectable in
       GetConnectablesFromDrag(dragEvent))
    {
      ILifeline lifeline = interaction.CreateLifeline();
      lifeline.Represents = connectable;
      lifeline.Name = connectable.Name;
    }
  }

  /// <summary>
  /// Called by the modeling framework to determine whether
  /// the user can drop something on a target.
  /// Must not change anything.
  /// </summary>
  /// <param name="target">The target shape or diagram</param>
  /// <param name="dragEvent">The item being dragged</param>
  /// <returns>true if this item can be dropped on this target</returns>
  public bool CanDragDrop(ShapeElement target,
           DiagramDragEventArgs dragEvent)
  {
    IEnumerable<IConnectableElement> connectables = GetConnectablesFromDrag(dragEvent);
    return connectables.Count() > 0;
  }

  ///<summary>
  /// Get dragged parts and ports of an IComponent.
  ///</summary>
  private IEnumerable<IConnectableElement>
    GetConnectablesFromDrag(DiagramDragEventArgs dragEvent)
  {
    foreach (IElement element in
      GetModelElementsFromDragEvent(dragEvent))
    {
      IConnectableElement part = element as IConnectableElement;
      if (part != null)
      {
        yield return part;
      }
    }
  }

  /// <summary>
  /// Retrieves UML IElements from drag arguments.
  /// Works for drags from UML diagrams.
  /// </summary>
  private IEnumerable<IElement> GetModelElementsFromDragEvent
          (DiagramDragEventArgs dragEvent)
  {
    //ElementGroupPrototype is the container for
    //dragged and copied elements and toolbox items.
    ElementGroupPrototype prototype =
       dragEvent.Data.
       GetData(typeof(ElementGroupPrototype))
            as ElementGroupPrototype;
    // Locate the originals in the implementation store.
    IElementDirectory implementationDirectory =
       dragEvent.DiagramClientView.Diagram.Store.ElementDirectory;

    return prototype.ProtoElements.Select(
      prototypeElement =>
      {
        ModelElement element = implementationDirectory
          .FindElement(prototypeElement.ElementId);
        ShapeElement shapeElement = element as ShapeElement;
        if (shapeElement != null)
        {
          // Dragged from a diagram.
          return shapeElement.ModelElement as IElement;
        }
        else
        {
          // Dragged from UML Model Explorer.
          return element as IElement;
        }
      });
  }

  public void OnDoubleClick(ShapeElement targetElement, DiagramPointEventArgs diagramPointEventArgs)
  {
  }
}

The code of GetModelElementsFromDragEvent() is described in How to: Get UML Model Elements from IDataObject.

Compartir a través de