Set-VpnS2SInterface
Updates parameters for an S2S Interface.
Syntax
Set-VpnS2SInterface
[[-Destination] <String[]>]
[-AdminStatus <Boolean>]
[-PromoteAlternate <Boolean>]
[-AuthenticationMethod <String>]
[-EapMethod <String>]
[-InternalIPv4 <Boolean>]
[-Force]
[-PostConnectionIPv4Subnet <String[]>]
[-IPv4TriggerFilter <String[]>]
[-IPv4TriggerFilterAction <Action>]
[-PostConnectionIPv6Subnet <String[]>]
[-IPv6TriggerFilter <String[]>]
[-IPv6TriggerFilterAction <Action>]
[-IPv4Subnet <String[]>]
[-Name] <String>
[-ResponderAuthenticationMethod <String>]
[-PassThru]
[-Persistent]
[-AutoConnectEnabled <Boolean>]
[-InitiateConfigPayload <Boolean>]
[-RadiusAttributeClass <String>]
[-EnableQoS <EnableQoS>]
[-TxBandwidthKbps <UInt64>]
[-RxBandwidthKbps <UInt64>]
[-NetworkOutageTimeSeconds <UInt32>]
[-NumberOfTries <UInt32>]
[-RetryIntervalSeconds <UInt32>]
[-SADataSizeForRenegotiationKilobytes <UInt32>]
[-SALifeTimeSeconds <UInt32>]
[-MMSALifeTimeSeconds <UInt32>]
[-IPv6Subnet <String[]>]
[-InternalIPv6 <Boolean>]
[-IdleDisconnectSeconds <UInt32>]
[-UserName <String>]
[-Password <String>]
[-Certificate <X509Certificate2>]
[-SharedSecret <String>]
[-SourceIpAddress <String>]
[-LocalVpnTrafficSelector <CimInstance[]>]
[-RemoteVpnTrafficSelector <CimInstance[]>]
[-EncryptionType <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]Set-VpnS2SInterface
[[-Destination] <String[]>]
[-AdminStatus <Boolean>]
[-InternalIPv4 <Boolean>]
[-Force]
[-IPv4Subnet <String[]>]
[-Name] <String>
[-PassThru]
[-EnableQoS <EnableQoS>]
[-TxBandwidthKbps <UInt64>]
[-RxBandwidthKbps <UInt64>]
[-IPv6Subnet <String[]>]
[-InternalIPv6 <Boolean>]
[-SourceIpAddress <String>]
[[-GreKey] <UInt32>]
[-GreTunnel]
[-IPv4Address <String>]
[-IPv6Address <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]Set-VpnS2SInterface
[[-Destination] <String[]>]
[-AdminStatus <Boolean>]
[-PromoteAlternate <Boolean>]
[-AuthenticationMethod <String>]
[-EapMethod <String>]
[-InternalIPv4 <Boolean>]
[-Force]
[-PostConnectionIPv4Subnet <String[]>]
[-IPv4TriggerFilter <String[]>]
[-IPv4TriggerFilterAction <Action>]
[-PostConnectionIPv6Subnet <String[]>]
[-IPv6TriggerFilter <String[]>]
[-IPv6TriggerFilterAction <Action>]
[-IPv4Subnet <String[]>]
[-Name] <String>
[-ResponderAuthenticationMethod <String>]
[-PassThru]
[-Persistent]
[-AutoConnectEnabled <Boolean>]
[-InitiateConfigPayload <Boolean>]
[-RadiusAttributeClass <String>]
[-EnableQoS <EnableQoS>]
[-TxBandwidthKbps <UInt64>]
[-RxBandwidthKbps <UInt64>]
[-NetworkOutageTimeSeconds <UInt32>]
[-NumberOfTries <UInt32>]
[-RetryIntervalSeconds <UInt32>]
[-SADataSizeForRenegotiationKilobytes <UInt32>]
[-SALifeTimeSeconds <UInt32>]
[-MMSALifeTimeSeconds <UInt32>]
[-IPv6Subnet <String[]>]
[-InternalIPv6 <Boolean>]
[-IdleDisconnectSeconds <UInt32>]
[-UserName <String>]
[-Password <String>]
[-Certificate <X509Certificate2>]
[-SharedSecret <String>]
[-EncryptionMethod <EncryptionMethod>]
[-IntegrityCheckMethod <IntegrityCheckMethod>]
[-CipherTransformConstants <CipherTransformConstants>]
[-DHGroup <DHGroup>]
[-AuthenticationTransformConstants <AuthenticationTransformConstants>]
[-PfsGroup <PfsGroup>]
[-CustomPolicy]
[-SourceIpAddress <String>]
[-LocalVpnTrafficSelector <CimInstance[]>]
[-RemoteVpnTrafficSelector <CimInstance[]>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]Description
The Set-VpnS2SInterace cmdlet is used to update parameters for a site-to-site (S2S) interface. If the connection is already connected, the changes take effect after disconnection. You can use the CustomPolicy parameter to customize Internet Protocol security (IPSec) settings. If the AuthenticationMethod parameter is set to pre-shared key (PSK), then only one interface can be enabled per destination and the initiator and responder policies are governed by what is specified for each interface. If the AuthenticationMethod parameter is set to user name or computer certificates (machine certificates), then only the initiator policies are governed by what is specified for each interface and the responder policies are governed by what is specified on the server. For incoming connections:
- If the authentication method is pre shared key, the interface whose destination IP matches the incoming IP is activated.
- If the authentication method is username, the interface whose name matches the username is activated.
- If the authentication method is certificates the interface whose name matches the certificate subject name is activated.
This cmdlet is used to modify parameters a S2S Interface. If the connection is already connected, the changes take effect after disconnection.
Examples
Example 1: Modify the destination address of an interface
PS C:\>Set-VpnS2SInterface -Name "Edge1" -Destination 131.107.0.4 -PassThruThis command modifies the destination address of interface named Edge1.
Example 2: Modify the initiator authentication method
PS C:\>Set-VpnS2SInterface -Name "Edge1" -AuthenticationMethod EAP -EapMethod EAP-MSCHAPv2 -PassThruThis command modifies the initiator authentication method.
Example 3: Modify the configuration of an existing S2S VPN interface
PS C:\>Set-VpnS2SInterface -Name "Edge1" -IPv4Subnet 172.23.90.0/24:50 -PassThru
RoutingDomain Name Destination AdminStatus ConnectionState IPv4Subnet
------------- ---- ----------- ----------- --------------- ----------
Rd_001 Blue-Tunnel-2 {100.0.0.7} True Disconnected {172.23.90.0/24:50}This command modifies the configuration of an existing S2S VPN interface of a specific routing domain in a Multi-Tenant environment.
Parameters
-AdminStatus
Specifies the admin status of the cmdlet.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AuthenticationMethod
Specifies the AuthenticationMethod to be used by the S2S connection.
| Type: | String |
| Accepted values: | EAP, MachineCertificates, PSKOnly, MSCHAPv2, |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AuthenticationTransformConstants
Specifies the authentication transform plumbed in IPsec policy.
| Type: | AuthenticationTransformConstants |
| Aliases: | FirstTransformType, AuthenticationTransformConstant |
| Accepted values: | MD596, SHA196, SHA256128, GCMAES128, GCMAES192, GCMAES256, None |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AutoConnectEnabled
Specifies a value that indicates whether auto-connect is enabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Certificate
Specifies the subject name of the certificate to be used in default store. This parameter is applicable only if the AuthenticationMethod parameter is set to MachineCert.
| Type: | X509Certificate2 |
| Aliases: | Cert |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CipherTransformConstants
Specifies the cipher plumbed in IPsec policy.
| Type: | CipherTransformConstants |
| Aliases: | OtherCipherAlgorithm, FirstCipherAlgorithm, CipherTransformConstant |
| Accepted values: | DES, DES3, AES128, AES192, AES256, GCMAES128, GCMAES192, GCMAES256, None |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CustomPolicy
Specifies custom Internet Key Exchange (IKE) IPsec policies, must be a separate parameter set.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Destination
Specifies the destination end-point of the S2S connection.
| Type: | String[] |
| Aliases: | RemoteTunnelEndpoint, RemoteTunnelHostname, RemoteAddress |
| Position: | 2 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DHGroup
Specifies the Diffie-Hellman (DH) Group Plumbed in IPsec policy.
| Type: | DHGroup |
| Accepted values: | None, Group1, Group2, Group14, ECP256, ECP384, Group24 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EapMethod
Specifies EAP method if IkeLocalAuthenticationMethod is EAP.
| Type: | String |
| Accepted values: | EAP-TLS, EAP-PEAP, EAP-MSCHAPv2, |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableQoS
Indicates whether to enable Quality of Service (QoS) on an interface. The acceptable values for this parameter are:
- Enabled
- Disabled
| Type: | EnableQoS |
| Accepted values: | Disabled, Enabled |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EncryptionMethod
Specifies the encryption method plumbed in IKE policy.
| Type: | EncryptionMethod |
| Aliases: | Encryption |
| Accepted values: | DES, DES3, AES128, AES192, AES256 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EncryptionType
Specifies the type of Encryption.
| Type: | String |
| Accepted values: | NoEncryption, RequireEncryption, OptionalEncryption, MaximumEncryption, CustomEncryption |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Force
Forces the command to run without asking for user confirmation.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-GreKey
Specifies the individual traffic flows within a Generic Routing Encapsulation (GRE) tunnel.
| Type: | UInt32 |
| Position: | 3 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-GreTunnel
Indicates that this cmdlet uses the GRE tunnel capability for the Windows Server Gateway.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IdleDisconnectSeconds
Specifies the time, in seconds, after which an idle connection is terminated. Unless the idle time-out is disabled, the entire connection is terminated if the connection is idle for the specified interval.
| Type: | UInt32 |
| Aliases: | IdleDurationSeconds, IdleDisconnectSec |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InitiateConfigPayload
Indicates whether to initiate a config payload negotiation.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IntegrityCheckMethod
Specifies the integrity method plumbed in IPsec policy.
| Type: | IntegrityCheckMethod |
| Aliases: | FirstIntegrityAlgorithm, OtherHashAlgorithm |
| Accepted values: | MD5, SHA1, SHA256, SHA384 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InternalIPv4
Specifies that the IPv4 address should be negotiated.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InternalIPv6
Specifies that the Ipv6 address should be negotiated.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPv4Address
Specifies the IPv4 address.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPv4Subnet
Specifies the IPv4 subnet that is routed on this connection with metric.
| Type: | String[] |
| Aliases: | IPv4TriggerSubnet |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPv4TriggerFilter
Specifies an array of IPv4 filters that trigger demand dial connections.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPv4TriggerFilterAction
Indicates whether a filter should trigger an S2S connection.
| Type: | Action |
| Accepted values: | Allow, Deny |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPv6Address
Specifies the IPv6 address.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPv6Subnet
Specifies the IPv6 subnet that is routed on this connection with metric.
| Type: | String[] |
| Aliases: | IPv6TriggerSubnet |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPv6TriggerFilter
Specifies an array of IPv6 filters that trigger demand dial connections.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPv6TriggerFilterAction
Indicates whether a filter should trigger an S2S connection.
| Type: | Action |
| Accepted values: | Allow, Deny |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-LocalVpnTrafficSelector
Specifies the traffic selector object.
| Type: | CimInstance[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-MMSALifeTimeSeconds
| Type: | UInt32 |
| Aliases: | MMSaLifeTimeSec |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Name
Specifies the name of the connection.
| Type: | String |
| Aliases: | ElementName |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NetworkOutageTimeSeconds
Specifies the maximum network outage time after which the connection is disconnected.
| Type: | UInt32 |
| Aliases: | NetworkOutageTimeSec |
| Accepted values: | 3, 6, 9, 12, 15, 30, 60, 120, 240, 360, 720, 900 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NumberOfTries
Specifies the number of tries the connection is retried. If you specify 0, the cmdlet will retry indefinitely.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Password
Specifies the password of the username to be used for dialing the connection. This parameter is only applicable if AuthenticationMethod is set to EAP.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Persistent
Indicates whether the connection state is persisted across the service restart or system reboots.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PfsGroup
Specifies the perfect forward secrecy (PFS) Group plumbed in IPsec policy.
| Type: | PfsGroup |
| Aliases: | PfsGroupId |
| Accepted values: | None, PFS1, PFS2, PFS2048, ECP256, ECP384, PFSMM, PFS24 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PostConnectionIPv4Subnet
Specifies the IPv4 subnet routes that are added to a S2S interface after the connection is established. The values specified are not used to initiate the S2S VPN connection.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PostConnectionIPv6Subnet
Specifies the IPv6 subnet routes that are added to a S2S interface after the connection is established. The values specified are not used to initiate the S2S VPN connection.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PromoteAlternate
Specifies an alternate IP address that when it successfully connects becomes the primary IP address, and the current primary IP address is moved to the alternate list.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-RadiusAttributeClass
Specifies a RADIUS attribute.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-RemoteVpnTrafficSelector
Specifies the traffic selector object.
| Type: | CimInstance[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ResponderAuthenticationMethod
Specifies the responder AuthenticationMethod to be used by the S2S connection.
| Type: | String |
| Accepted values: | MachineCertificates, PSKOnly, |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-RetryIntervalSeconds
Specifies the number of seconds between retries.
| Type: | UInt32 |
| Aliases: | RetryIntervalSec |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-RxBandwidthKbps
Specifies the receive bandwidth limit, in kilobits per second (Kbps).
| Type: | UInt64 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-SADataSizeForRenegotiationKilobytes
Specifies the number of kilobytes that are allowed to transfer using a security association (SA), after which the SA will be renegotiated.
| Type: | UInt32 |
| Aliases: | SARenegotiationDataSizeKB, LifeTimeKiloBytes |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-SALifeTimeSeconds
Specifies the lifetime of a SA in seconds, after which the SA is no longer valid.
| Type: | UInt32 |
| Aliases: | SaLifeTimeSec, LifeTimeSeconds, QMSALifeTimeSeconds |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-SharedSecret
Specifies the text of the shared secret to be used in dialing the connection. This parameter is only applicable if AuthenticationMethod is set to PSK.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SourceIpAddress
Specifies the source IPv4 or IPv6 addresses to use when dialing the connection.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent connections that can be established to run this command. If you omit this parameter or enter a value of 0, the default value, 32, is used.
The throttle limit applies only to the current command, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TxBandwidthKbps
Specifies a transmit bandwidth limit, in Kbps, for the interface.
| Type: | UInt64 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-UserName
Specifies the username to be used for dialing this connection. This parameter is only applicable if AuthenticationMethod is set to EAP.
| Type: | String |
| Aliases: | User |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
String[]
Nullable<T>[[Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.Action, Microsoft.PowerShell.Cmdletization.GeneratedTypes, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null]]
Nullable<T>[[Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.EnableQoS, Microsoft.PowerShell.Cmdletization.GeneratedTypes, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null]]
Nullable<T>[[System.UInt64, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.EncryptionMethod
Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.IntegrityCheckMethod
Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.CipherTransformConstants
Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.DHGroup
Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.AuthenticationTransformConstants
Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnS2SInterface.PfsGroup
Nullable<T>[[System.UInt32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]