New-NetworkControllerVirtualGatewayNetworkConnection

Reference

Module:: NetworkController

Creates a virtual gateway network connection.

Syntax

New-NetworkControllerVirtualGatewayNetworkConnection
   [-VirtualGatewayId] <String>
   [-ResourceId] <String>
   [-Properties] <NetworkConnectionProperties>
   [[-ResourceMetadata] <ResourceMetadata>]
   [[-Etag] <String>]
   [-Force]
   -ConnectionUri <Uri>
   [-CertificateThumbprint <String>]
   [-Credential <PSCredential>]
   [-PassInnerException]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The New-NetworkControllerVirtualGatewayNetworkConnection cmdlet adds a configuration for a network connection for the specified tenant in Network Controller. If a network connection configuration already exists, this cmdlet overwrites and replaces the older configuration.

Examples

Example 1: Add a new IPSec network connection to tenant virtual gateway

PS C:\> $uri = "https://networkcontroller"

# Create a new object for tenant network connection
PS C:\> $nwConnectionProperties = New-Object Microsoft.Windows.NetworkController.NetworkConnectionProperties 

# Update the common object properties
PS C:\> $nwConnectionProperties.ConnectionType = "IPSec" 
PS C:\> $nwConnectionProperties.OutboundKiloBitsPerSecond = 10000 
PS C:\> $nwConnectionProperties.InboundKiloBitsPerSecond = 10000 

# Update specific properties depending on the connection type
PS C:\> $nwConnectionProperties.IpSecConfiguration = New-Object Microsoft.Windows.NetworkController.IpSecConfiguration 
PS C:\> $nwConnectionProperties.IpSecConfiguration.AuthenticationMethod = "PSK" 
PS C:\> $nwConnectionProperties.IpSecConfiguration.SharedSecret = "P@ssw0rd" 

PS C:\> $nwConnectionProperties.IpSecConfiguration.QuickMode = New-Object Microsoft.Windows.NetworkController.QuickMode 
PS C:\> $nwConnectionProperties.IpSecConfiguration.QuickMode.PerfectForwardSecrecy = "PFS2048" 
PS C:\> $nwConnectionProperties.IpSecConfiguration.QuickMode.AuthenticationTransformationConstant = "SHA256128" 
PS C:\> $nwConnectionProperties.IpSecConfiguration.QuickMode.CipherTransformationConstant = "DES3" 
PS C:\> $nwConnectionProperties.IpSecConfiguration.QuickMode.SALifeTimeSeconds = 1233 
PS C:\> $nwConnectionProperties.IpSecConfiguration.QuickMode.IdleDisconnectSeconds = 500 
PS C:\> $nwConnectionProperties.IpSecConfiguration.QuickMode.SALifeTimeKiloBytes = 2000 

PS C:\> $nwConnectionProperties.IpSecConfiguration.MainMode = New-Object Microsoft.Windows.NetworkController.MainMode 
PS C:\> $nwConnectionProperties.IpSecConfiguration.MainMode.DiffieHellmanGroup = "Group2" 
PS C:\> $nwConnectionProperties.IpSecConfiguration.MainMode.IntegrityAlgorithm = "SHA256" 
PS C:\> $nwConnectionProperties.IpSecConfiguration.MainMode.EncryptionAlgorithm = "AES256" 
PS C:\> $nwConnectionProperties.IpSecConfiguration.MainMode.SALifeTimeSeconds = 1234 
PS C:\> $nwConnectionProperties.IpSecConfiguration.MainMode.SALifeTimeKiloBytes = 2000 

# L3 specific configuration (leave blank for IPSec)
PS C:\> $nwConnectionProperties.IPAddresses = @() 
PS C:\> $nwConnectionProperties.PeerIPAddresses = @() 

# Update the IPv4 routes that are reachable over the site-to-site VPN tunnel
PS C:\> $nwConnectionProperties.Routes = @() 
PS C:\> $ipv4Route = New-Object Microsoft.Windows.NetworkController.RouteInfo 
PS C:\> $ipv4Route.DestinationPrefix = "14.1.10.1/32" 
PS C:\> $ipv4Route.metric = 10 
PS C:\> $nwConnectionProperties.Routes += $ipv4Route 

# Tunnel destination (remote endpoint) address
PS C:\> $nwConnectionProperties.DestinationIPAddress = "10.127.134.121" 

# Add the new network connection for the tenant
PS C:\> New-NetworkControllerVirtualGatewayNetworkConnection -ConnectionUri $uri -VirtualGatewayId "Contoso" -ResourceId "Contoso_IPSecGW" -Properties $nwConnectionProperties -Force

This set of cmdlets adds a new IPSec connection on the Contoso tenant virtual gateway.

Example 2: Add a GRE network connection to a tenant virtual gateway

PS C:\> $uri = "https://networkcontroller"

# Create a new object for the tenant network connection
PS C:\> $nwConnectionProperties = New-Object Microsoft.Windows.NetworkController.NetworkConnectionProperties 

# Update the common object properties
PS C:\> $nwConnectionProperties.ConnectionType = "GRE" 
PS C:\> $nwConnectionProperties.OutboundKiloBitsPerSecond = 10000 
PS C:\> $nwConnectionProperties.InboundKiloBitsPerSecond = 10000 

# Update specific properties depending on the connection type
PS C:\> $nwConnectionProperties.GreConfiguration = New-Object Microsoft.Windows.NetworkController.GreConfiguration 
PS C:\> $nwConnectionProperties.GreConfiguration.GreKey = 1234 

# Update the IPv4 routes that are reachable over the site-to-site VPN tunnel
PS C:\> $nwConnectionProperties.Routes = @() 
PS C:\> $ipv4Route = New-Object Microsoft.Windows.NetworkController.RouteInfo 
PS C:\> $ipv4Route.DestinationPrefix = "14.2.20.1/32" 
PS C:\> $ipv4Route.metric = 10 
PS C:\> $nwConnectionProperties.Routes += $ipv4Route 

# Tunnel destination (remote endpoint) address
PS C:\> $nwConnectionProperties.DestinationIPAddress = "10.127.134.122" 

# L3 specific configuration (leave blank for GRE)
PS C:\> $nwConnectionProperties.L3Configuration = New-Object Microsoft.Windows.NetworkController.L3Configuration 
PS C:\> $nwConnectionProperties.IPAddresses = @() 
PS C:\> $nwConnectionProperties.PeerIPAddresses = @() 

# Add the new network connection for the tenant
PS C:\> New-NetworkControllerVirtualGatewayNetworkConnection -ConnectionUri $uri -VirtualGatewayId "Contoso" -ResourceId "Contoso_GreGW" -Properties $nwConnectionProperties -Force

This set of cmdlets adds a new GRE connection on Contoso tenant virtual gateway.

Example 3: Add a new GRE network connection to a tenant virtual gateway

PS C:\> $uri = "https://networkcontroller"

#############################################################################
# A. Configure a VNET based Logical Network for the L3 Connection on the NC #
#############################################################################

# Create a new object for the logical network to be used for L3 forwarding
PS C:\> $lnProperties = New-Object Microsoft.Windows.NetworkController.LogicalNetworkProperties

PS C:\> $lnProperties.NetworkVirtualizationEnabled = $false
PS C:\> $lnProperties.Subnets = @()

# Create a new object for the logical subnet to be used for L3 forwarding and update properties
PS C:\> $logicalsubnet = New-Object Microsoft.Windows.NetworkController.LogicalSubnet
PS C:\> $logicalsubnet.ResourceId = "Contoso_L3_Subnet"
PS C:\> $logicalsubnet.Properties = New-Object Microsoft.Windows.NetworkController.LogicalSubnetProperties
PS C:\> $logicalsubnet.Properties.VlanID = 1001
PS C:\> $logicalsubnet.Properties.AddressPrefix = "10.127.134.0/25"
PS C:\> $logicalsubnet.Properties.DefaultGateway = "10.127.134.1"

$lnProperties.Subnets += $logicalsubnet

# Add the new logical network to Network Controller
PS C:\> $vlanNetwork = New-NetworkControllerLogicalNetwork -ConnectionUri $uri -ResourceId "Contoso_L3_Network" -Properties $lnProperties -Force

#######################################################
# B. Configure the L3 Forwarding connection on the NC #
#######################################################
# Create a new object for the tenant network connection
PS C:\> $nwConnectionProperties = New-Object Microsoft.Windows.NetworkController.NetworkConnectionProperties 

# Update the common object properties
PS C:\> $nwConnectionProperties.ConnectionType = "L3" 
PS C:\> $nwConnectionProperties.OutboundKiloBitsPerSecond = 10000 
PS C:\> $nwConnectionProperties.InboundKiloBitsPerSecond = 10000 

# GRE-specific configuration (leave blank for L3)
PS C:\> $nwConnectionProperties.GreConfiguration = New-Object Microsoft.Windows.NetworkController.GreConfiguration 

# Update specific properties depending on the connection type
PS C:\> $nwConnectionProperties.L3Configuration = New-Object Microsoft.Windows.NetworkController.L3Configuration 
PS C:\> $nwConnectionProperties.L3Configuration.VlanSubnet = $vlanNetwork.properties.Subnets[0] 

PS C:\> $nwConnectionProperties.IPAddresses = @() 
PS C:\> $localIPAddress = New-Object Microsoft.Windows.NetworkController.CidrIPAddress 
PS C:\> $localIPAddress.IPAddress = "10.127.134.55" 
PS C:\> $localIPAddress.PrefixLength = 25 
PS C:\> $nwConnectionProperties.IPAddresses += $localIPAddress 

PS C:\> $nwConnectionProperties.PeerIPAddresses = @("10.127.134.65") 

# Update the IPv4 routes that are reachable over the site-to-site VPN tunnel
PS C:\> $nwConnectionProperties.Routes = @() 
PS C:\> $ipv4Route = New-Object Microsoft.Windows.NetworkController.RouteInfo 
PS C:\> $ipv4Route.DestinationPrefix = "14.2.20.1/32" 
PS C:\> $ipv4Route.metric = 10 
PS C:\> $nwConnectionProperties.Routes += $ipv4Route 

# Add the new network connection for the tenant
PS C:\> New-NetworkControllerVirtualGatewayNetworkConnection -ConnectionUri $uri -VirtualGatewayId "Contoso" -ResourceId "Contoso_L3GW" -Properties $nwConnectionProperties -Force

This set of cmdlets adds a new GRE connection on Contoso tenant virtual gateway.

Parameters

-CertificateThumbprint

Specifies the digital public key X.509 certificate of a user account that has permission to perform this action. This is the certificate thumbprint of the certificate.This thumbprint must also be provided in the ClientCertificateThumbprint parameter in the Install-NetworkController or Set-NetworkController cmdlet so that Network Controller can authorize this user.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ConnectionUri

Specifies the Uniform Resource Identifier (URI) of the Network Controller, used by all Representational State Transfer (REST) clients to connect to Network Controller.

Type:	Uri
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-Credential

Specifies a user credential that has permission to perform this action. The default value is the current user. This user must be present in the security group provided in the ClientSecurityGroup parameter in the Install-NetworkController cmdlet.

Type:	PSCredential
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Etag

Specifies the entity tag (ETag) of the resource. An ETag is an HTTP response header returned by an HTTP-compliant web server. An ETag is used to determine change in the content of a resource at a given URL. The value of the header is an opaque string representing the state of the resource at the time the response was generated.

Type:	String
Position:	6
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Force

Forces the command to run without asking for user confirmation.

Type:	SwitchParameter
Position:	7
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-PassInnerException

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Properties

Specifies the properties of the network connection.

Type:	NetworkConnectionProperties
Position:	3
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-ResourceId

Specifies the resource ID of the network connection to create.

Type:	String
Position:	1
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-ResourceMetadata

Specifies metadata information for the client, such as the tenant ID, group ID, and resource name.

Type:	ResourceMetadata
Position:	4
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-VirtualGatewayId

Specifies the ID of a virtual gateway.

Type:	String
Position:	0
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

Outputs

This cmdlet outputs the following information:

Resource reference URI.
Created time of the resource.
Instance ID of the resource.
Resource metadata.
Resource ID.
Properties of the resource:

""ConnectionType"" : """",

""OutboundKiloBitsPerSecond"" : \<UInt32\>,

""InboundKiloBitsPerSecond"" : \<UInt32\>,

""IPSecConfiguration"": @{

    ""QuickMode"": @{

            ""PerfectForwardSecrecy"": """",

            ""authenticationTransformationConstant"": """",

            ""cipherTransformationConstant"": """",

            ""saLifeTimeSeconds"": """",

            ""idleDisconnectSeconds"": """",

            ""saLifeTimeKiloBytes"": """"

    },

    ""MainMode"": @{

        ""diffieHellmanGroup"": """",

        ""integrityAlgorithm"": """",

        ""encryptionAlgorithm"": """",

        ""saLifeTimeSeconds"": """",

        ""saLifeTimeKiloBytes"": """"

    },

    ""AuthenticationMethod"": """",

    ""SharedSecret"": """"

},

""GreConfiguration"": @{ ""GREKey"": """"},

""L3Configuration"": @{ ""VlanSubnet"": @{""ResourceRef"": ""\<string\>"" }},

""IPAddresses"": @(),

""PeerIPAddresses"": @(),

""Routes"": @( @{

    ""DestinationPrefix"": """",

    ""Metric"": """"

}),

""DestinationIPAddress"" : """"

Compartir a través de

New-NetworkControllerVirtualGatewayNetworkConnection

Syntax

Description

Examples

Example 1: Add a new IPSec network connection to tenant virtual gateway

Example 2: Add a GRE network connection to a tenant virtual gateway

Example 3: Add a new GRE network connection to a tenant virtual gateway

Parameters

-CertificateThumbprint

-Confirm

-ConnectionUri

-Credential

-Etag

-Force

-PassInnerException

-Properties

-ResourceId

-ResourceMetadata

-VirtualGatewayId

-WhatIf

Outputs

Comentarios

Recursos adicionales

Compartir a través de

New-NetworkControllerVirtualGatewayNetworkConnection

Syntax

Description

Examples

Example 1: Add a new IPSec network connection to tenant virtual gateway

Example 2: Add a GRE network connection to a tenant virtual gateway

Example 3: Add a new GRE network connection to a tenant virtual gateway

Parameters

-CertificateThumbprint

-Confirm

-ConnectionUri

-Credential

-Etag

-Force

-PassInnerException

-Properties

-ResourceId

-ResourceMetadata

-VirtualGatewayId

-WhatIf

Outputs

Related Links

Comentarios

Recursos adicionales