Compartir a través de

3.1.4.20 RRouterInterfaceTransportSetInfo (Opnum 19)

  • Artículo

The RRouterInterfaceTransportSetInfo method SHOULD<276> set information about a transport running on a specified interface. The information is overwritten using the type RTR_INFO_BLOCK_HEADER (section 2.2.1.2.3), encapsulated within a DIM_INTERFACE_CONTAINER (section 2.2.1.2.2).    

 DWORD RRouterInterfaceTransportSetInfo(
   [in] DIM_HANDLE hDimServer,
   [in] DWORD hInterface,
   [in] DWORD dwTransportId,
   [in] PDIM_INTERFACE_CONTAINER pInfoStruct
 );

hDimServer: A handle to the RRASM server where the call is to be executed, see section 3.1.3.

hInterface: The unique identifier of an interface. This can be obtained from RRouterInterfaceCreate (section 3.1.4.13) or RRouterInterfaceGetHandle (section 3.1.4.12). Because the RRASM server does not maintain the interface handles, the RRAS server SHOULD check and ensure that this handle represents a valid interface handle. 

dwTransportId: Specifies the transport for which the information is set (IPX, IPv4, or IPv6). It MUST be one of the following values.<277> Otherwise an error other than those in the return values table is returned.

Value

Meaning

PID_IPX

0x0000002B

IPX protocol

PID_IP

0x00000021

IPv4 protocol

PID_IPV6

0x00000057

IPv6 protocol

pInfoStruct: This is a pointer of type DIM_INTERFACE_CONTAINER.

pInterfaceInfo and dwInterfaceInfoSize of PDIM_INTERFACE_CONTAINER MUST be set. The rest of the fields are ignored. The RRASM server does not store the interface configurations for the various transports that the RRAS server supports. The RRAS server SHOULD check that the InfoType field of RTR_TOC_ENTRY (section 2.2.1.2.4) is supported.  

Only a combination of the following entries of RTR_TOC_ENTRY MUST be present in pInterfaceInfo.<278>

Value

Meaning and conditions (interface means the one identified by hInterface)

Structure pointed to at offset

IP_INTERFACE_STATUS_INFO

0xFFFF0004

Interface IP status information is overwritten.

INTERFACE_STATUS_INFO (section 2.2.1.2.18)

IP_ROUTER_DISC_INFO

0xFFFF0007

Router discovery information is overwritten.

RTR_DISC_INFO (section 2.2.1.2.14)

IP_MCAST_BOUNDARY_INFO

0xFFFF000B

Multicast boundary information is added.

MIB_BOUNDARYROW (section 2.2.1.2.24)

IP_IFFILTER_INFO

0xFFFF000D

IP interface filter information is overwritten. The interface MUST NOT be of type ROUTER_IF_TYPE_INTERNAL, ROUTER_IF_TYPE_LOOPBACK, or ROUTER_IF_TYPE_DIALOUT.

IFFILTER_INFO (section 2.2.1.2.88)

IP_MCAST_LIMIT_INFO

0xFFFF000E

Multicast configuration information.

MIB_MCAST_LIMIT_ROW (section 2.2.1.2.16)

IP_ROUTE_INFO

0xFFFF0005

The dwAdminStatus MUST be IF_ADMIN_STATUS_UP if the route information is added.

If bV4 of INTERFACE_ROUTE_INFO is set, it indicates an IPv4 route is added; otherwise, an IPv6 route is added.

INTERFACE_ROUTE_INFO (section 2.2.1.2.11)
 

IP_IN_FILTER_INFO

0xFFFF0001

This is the input filter that MUST be applied to IP packets sent to the RRAS server. The information is overwritten. The interface MUST NOT be of type ROUTER_IF_TYPE_INTERNAL, ROUTER_IF_TYPE_LOOPBACK, or ROUTER_IF_TYPE_DIALOUT.

FILTER_DESCRIPTOR (section 2.2.1.2.5)

IP_OUT_FILTER_INFO

0xFFFF0002

This is the output filter that MUST be applied to IP packets sent from the RRAS server. The information is overwritten. The interface MUST NOT be of type ROUTER_IF_TYPE_INTERNAL, ROUTER_IF_TYPE_LOOPBACK, or ROUTER_IF_TYPE_DIALOUT.

FILTER_DESCRIPTOR (section 2.2.1.2.5)

IP_DEMAND_DIAL_FILTER_INFO

0xFFFF0009

IPv4 traffic that matches this filter indicates that there is a site-to-site connection available into which all the IPv4 packets (matching this filter) are routed. The information is overwritten. The interface MUST be of type ROUTER_IF_TYPE_FULL_ROUTER or ROUTER_IF_TYPE_HOME_ROUTER.

FILTER_DESCRIPTOR (section 2.2.1.2.5)

IP_IN_FILTER_INFO_V6

0xFFFF0011

This is the input filter that MUST be applied to IPv6 packets sent to the RRAS server. The information is overwritten. The interface MUST NOT be of type ROUTER_IF_TYPE_INTERNAL, ROUTER_IF_TYPE_LOOPBACK, or ROUTER_IF_TYPE_DIALOUT.

FILTER_DESCRIPTOR_V6 (section 2.2.1.2.7)
 

IP_OUT_FILTER_INFO_V6

0xFFFF0012

This is the output filter that MUST be applied to IPv6 packets sent from the RRAS server. The information is overwritten. The interface MUST NOT be of type ROUTER_IF_TYPE_INTERNAL, ROUTER_IF_TYPE_LOOPBACK, or ROUTER_IF_TYPE_DIALOUT.

FILTER_DESCRIPTOR_V6 (section 2.2.1.2.7)
 

IP_DEMAND_DIAL_FILTER_INFO_V6

0xFFFF0013

IPv6 traffic that matches this filter indicates that a site-to-site connection MUST be available and all IPv6 packets matching this filter MUST be routed into the connection. The interface MUST be of type ROUTER_IF_TYPE_FULL_ROUTER or ROUTER_IF_TYPE_HOME_ROUTER. The filters are overwritten.

FILTER_DESCRIPTOR_V6 (section 2.2.1.2.7)
 

IP_IFFILTER_INFO_V6

0xFFFF0014

The IPv6 interface filter information is overwritten. The interface MUST NOT be of type ROUTER_IF_TYPE_INTERNAL, ROUTER_IF_TYPE_LOOPBACK, or ROUTER_IF_TYPE_DIALOUT.

IFFILTER_INFO (section 2.2.1.2.88)
 

MS_IP_BOOTP

0x0000270F

IP BOOTP interface information.

IPBOOTP_IF_CONFIG (section 2.2.1.2.150)

MS_IP_IGMP

0x4137000A

IGMP interface information. It can only be set once.

IGMP_MIB_IF_CONFIG (section 2.2.1.2.174)

MS_IP_RIP

0x00000008

IP RIP interface information.

IPRIP_IF_CONFIG (section 2.2.1.2.166)

MS_IP_DHCP_ALLOCATOR

0x81372714

DHCP allocator interface information.

IP_AUTO_DHCP_INTERFACE_INFO (section 2.2.1.2.192)

MS_IP_DNS_PROXY

0x81372713

DNS proxy interface information.

IP_DNS_PROXY_INTERFACE_INFO (section 2.2.1.2.194)

MS_IP_NAT

0x81372715

IP NAT interface information.

IP_NAT_INTERFACE_INFO (section 2.2.1.2.197)

MS_IP_OSPF<279>

0x0000000D

OSPF interface information is set. This MUST end the configuration buffer by OSPF_END_PARAM_TYPE. If passed with any other structure, it will return an error.

OSPF_INTERFACE_PARAM (section 2.2.1.2.215, OSPF_NBMA_NEIGHBOR_PARAM (section 2.2.1.2.216)

MS_IPV6_DHCP

0x000003E7

DHCPv6 Relay interface information. It can only be set once.

DHCPV6R_IF_CONFIG (section 2.2.1.2.159)

Return Values: A 32-bit, unsigned integer value that indicates return status. A return value of ERROR_SUCCESS (0x00000000) indicates that the operation was completed successfully; otherwise, it contains an error code, as specified in [MS-ERREF] or in section 2.2.4. All values that are not in the table that follows MUST be treated the same by the RRASM client.

Return value/code

Description

ERROR_SUCCESS

0x00000000

The call was successful.

ERROR_ACCESS_DENIED

0x00000005

The calling application does not have sufficient privileges, as specified in section 2.1.1.1.

The Opnum field value for this method is 19.

When processing this call, the RRASM server MUST do the following:

  • Validate, as specified in section 2.1.1.1, whether this method was called by a client that has access to the method. If the client does not have access, then return error ERROR_ACCESS_DENIED (0x00000005).

  • If pInfoStruct is NULL, return an error other than those in the preceding table.

  • If dwTransportId is not specified in SupportedTransportsList, return an error other than those specified in the preceding table.

  • Call the abstract interface Invoke DIMSVC method specifying the operation and the parameters to enable the RRAS server to perform the required management task.

  • Return any processing error that the RRAS server fails with. Otherwise return ERROR_SUCCESS (0x00000000).

No exceptions are thrown beyond those thrown by the underlying RPC protocol [MS-RPCE].