2.4.38 FilePipeRemoteInformation
This information class is used to query information on a named pipe that is associated with the client end of the pipe that is being queried. Remote information is not available for local pipes or for the server end of a remote pipe. Therefore, this information class is usable only by the client to retrieve information associated with its end of the pipe.
A FILE_PIPE_REMOTE_INFORMATION data element, defined as follows, is returned by the server.
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
3 |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CollectDataTime |
|||||||||||||||||||||||||||||||
|
... |
|||||||||||||||||||||||||||||||
|
MaximumCollectionCount |
|||||||||||||||||||||||||||||||
CollectDataTime (8 bytes): A 64-bit signed integer that MUST contain the maximum amount of time counted in 100-nanosecond intervals that will elapse before transmission of data from the client machine to the server.
MaximumCollectionCount (4 bytes): A 32-bit unsigned integer that MUST contain the maximum size, in bytes, of data that will be collected on the client machine before transmission to the server.
This operation returns a status code as specified in section 2.2. Upon success, the status code returned by the function that processes this file information class is STATUS_SUCCESS. The most common error codes are listed in the following table.
|
Error code |
Meaning |
|---|---|
|
STATUS_INFO_LENGTH_MISMATCH 0xC0000004 |
The specified information record length does not match the length that is required for the specified information class. |
For more information on named pipes, please see [PIPE].