2.2.1.5 Status Codes (SMB_ERROR)
An SMB_ERROR MUST be interpreted in one of two ways, depending on the capabilities negotiated between client and server: either as an NTSTATUS value (a 32-bit value in little-endian byte order used to encode an error message, as defined in [MS-ERREF] section 2.3), or as an SMBSTATUS value (as defined following).
-
SMBSTATUS { UCHAR ErrorClass; UCHAR Reserved; USHORT ErrorCode; }
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
3 |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ErrorClass |
Reserved |
ErrorCode |
|||||||||||||||||||||||||||||
ErrorClass (1 byte): An SMB error class code.
Reserved (1 byte): This field is reserved and MUST be ignored by both server and client.
ErrorCode (2 bytes): An SMB error code.
The set of NTSTATUS values defined in [MS-ERREF] is extended in this document to include 32-bit CIFS-specific error codes. Each CIFS-specific error code is wire-identical to the equivalent SMBSTATUS ErrorClass/ErrorCode pair, as listed in section 2.2.2.4. CIFS-specific error codes can be interpreted by the client either as 32-bit values or as SMBSTATUS values.<18>