Aplicaciones ASP.NET que usan identificadores de espera
Los modelos de devolución de llamada y sondeo para controlar las operaciones asincrónicas son útiles cuando la aplicación está procesando una sola operación asincrónica a la vez. Los modelos Wait proporcionan una manera más flexible de procesar varias operaciones asincrónicas. Existen dos modelos Wait, cuyo nombre se debe a los métodos WaitHandle usados para implementarlos: Wait (Any) y Wait (All).
Para usar cualquier modelo Wait, debe usar la propiedad AsyncWaitHandle del objeto IAsyncResult devuelto por los métodos BeginExecuteNonQuery, BeginExecuteReader o BeginExecuteXmlReader. Los métodos WaitAny y WaitAll requieren que se envíen los objetos WaitHandle como argumento, agrupados en una matriz.
Ambos métodos Wait supervisan las operaciones asincrónicas, a la espera de su finalización. El método WaitAny espera a que cualquiera de las operaciones se complete o agote su tiempo de espera. Una vez que sabe que una determinada operación se ha completado, puede procesar sus resultados y luego seguir a la espera de que la siguiente operación se complete o agote su tiempo de espera. El método WaitAll espera a que todos los procesos de la matriz de instancias WaitHandle se completen o agoten su tiempo de espera antes de continuar.
La ventaja de los modelos Wait es más impactante cuando se necesita ejecutar varias operaciones de cierta longitud en servidores diferentes, o bien cuando el servidor es lo suficientemente eficaz como para procesar todas las consultas al mismo tiempo. En los ejemplos de este artículo, tres consultas emulan procesos largos agregando comandos WAITFOR de diferentes longitudes a consultas SELECT sin relevancia.
Ejemplo: Modelo Wait (Any)
En el ejemplo siguiente se ilustra el modelo Wait (Any). Una vez iniciados tres procesos asincrónicos, se llama al método WaitAny para esperar a que se complete cualquiera de ellos. Cuando se completa cada proceso, se llama al método EndExecuteReader y se lee el objeto SqlDataReader devuelto. En este punto, una aplicación real probablemente usaría SqlDataReader para rellenar una parte de la página. En este sencillo ejemplo, se agrega la hora a la que se completa el proceso a un cuadro de texto correspondiente al proceso. Tomadas juntas, las horas de los cuadros de texto ilustran el punto: el código se ejecuta cada vez que se completa un proceso.
Para configurar este ejemplo, cree un proyecto de sitio web de ASP.NET. Coloque un control Button y cuatro controles TextBox en la página (aceptando el nombre predeterminado de cada control).
Agregue el código siguiente a la clase del formulario y modifique la cadena de conexión según sea necesario para su entorno.
' Add these to the top of the class
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Threading
' Add this code to the page's class:
Private Function GetConnectionString() As String
' To avoid storing the connection string in your code,
' you can retrieve it from a configuration file.
' If you have not included "Asynchronous Processing=true"
' in the connection string, the command will not be able
' to execute asynchronously.
Return "..." & _
"Asynchronous Processing=true"
End Function
Sub Button1_Click( _
ByVal sender As Object, ByVal e As System.EventArgs)
' In a real-world application, you might be connecting to
' three different servers or databases. For the example,
' we connect to only one.
Dim connection1 As New SqlConnection(GetConnectionString())
Dim connection2 As New SqlConnection(GetConnectionString())
Dim connection3 As New SqlConnection(GetConnectionString())
' To keep the example simple, all three asynchronous
' processes select a row from the same table. WAITFOR
' commands are used to emulate long-running processes
' that complete after different periods of time.
Dim commandText1 As String = _
"WAITFOR DELAY '0:0:01';" & _
"SELECT * FROM Production.Product " & _
"WHERE ProductNumber = 'BL-2036'"
Dim commandText2 As String = _
"WAITFOR DELAY '0:0:05';" & _
"SELECT * FROM Production.Product " & _
"WHERE ProductNumber = 'BL-2036'"
Dim commandText3 As String = _
"WAITFOR DELAY '0:0:10';" & _
"SELECT * FROM Production.Product " & _
"WHERE ProductNumber = 'BL-2036'"
Dim waitHandles(2) As WaitHandle
Try
' For each process, open a connection and begin execution.
' Use the IAsyncResult object returned by
' BeginExecuteReader to add a WaitHandle for the process
' to the array.
connection1.Open()
Dim command1 As New SqlCommand(commandText1, connection1)
Dim result1 As IAsyncResult = _
command1.BeginExecuteReader()
waitHandles(0) = result1.AsyncWaitHandle
connection2.Open()
Dim command2 As New SqlCommand(commandText2, connection2)
Dim result2 As IAsyncResult = _
command2.BeginExecuteReader()
waitHandles(1) = result2.AsyncWaitHandle
connection3.Open()
Dim command3 As New SqlCommand(commandText3, connection3)
Dim result3 As IAsyncResult = _
command3.BeginExecuteReader()
waitHandles(2) = result3.AsyncWaitHandle
Dim index As Integer
For countWaits As Integer = 1 To 3
' WaitAny waits for any of the processes to complete.
' The return value is either the index of the
' array element whose process just completed, or
' the WaitTimeout value.
index = WaitHandle.WaitAny(waitHandles, 60000, False)
' This example doesn't actually do anything with the
' data returned by the processes, but the code opens
' readers for each just to demonstrate the concept.
' Instead of using the returned data to fill the
' controls on the page, the example adds the time
' the process was completed to the corresponding
' text box.
Select Case index
Case 0
Dim reader1 As SqlDataReader
reader1 = command1.EndExecuteReader(result1)
If reader1.Read Then
TextBox1.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
End If
reader1.Close()
Case 1
Dim reader2 As SqlDataReader
reader2 = command2.EndExecuteReader(result2)
If reader2.Read Then
TextBox2.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
End If
reader2.Close()
Case 2
Dim reader3 As SqlDataReader
reader3 = command3.EndExecuteReader(result3)
If reader3.Read Then
TextBox3.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
End If
reader3.Close()
Case WaitHandle.WaitTimeout
Throw New Exception("Timeout")
End Select
Next
Catch ex As Exception
TextBox4.Text = ex.ToString
End Try
connection1.Close()
connection2.Close()
connection3.Close()
End Sub
// Add the following using directives, if they aren't already there.
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Threading;
using System.Data.SqlClient;
// Add this code to the page's class
string GetConnectionString()
// To avoid storing the connection string in your code,
// you can retrieve it from a configuration file.
// If you have not included "Asynchronous Processing=true"
// in the connection string, the command will not be able
// to execute asynchronously.
{
return "/* Rest of connection string */" + "Asynchronous Processing=true";
}
void Button1_Click(object sender, System.EventArgs e)
{
// In a real-world application, you might be connecting to
// three different servers or databases. For the example,
// we connect to only one.
SqlConnection connection1 =
new SqlConnection(GetConnectionString());
SqlConnection connection2 =
new SqlConnection(GetConnectionString());
SqlConnection connection3 =
new SqlConnection(GetConnectionString());
// To keep the example simple, all three asynchronous
// processes select a row from the same table. WAITFOR
// commands are used to emulate long-running processes
// that complete after different periods of time.
string commandText1 = "WAITFOR DELAY '0:0:01';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
string commandText2 = "WAITFOR DELAY '0:0:05';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
string commandText3 = "WAITFOR DELAY '0:0:10';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
try
// For each process, open a connection and begin
// execution. Use the IAsyncResult object returned by
// BeginExecuteReader to add a WaitHandle for the
// process to the array.
{
connection1.Open();
SqlCommand command1 =
new SqlCommand(commandText1, connection1);
IAsyncResult result1 = command1.BeginExecuteReader();
WaitHandle waitHandle1 = result1.AsyncWaitHandle;
connection2.Open();
SqlCommand command2 =
new SqlCommand(commandText2, connection2);
IAsyncResult result2 = command2.BeginExecuteReader();
WaitHandle waitHandle2 = result2.AsyncWaitHandle;
connection3.Open();
SqlCommand command3 =
new SqlCommand(commandText3, connection3);
IAsyncResult result3 = command3.BeginExecuteReader();
WaitHandle waitHandle3 = result3.AsyncWaitHandle;
WaitHandle[] waitHandles = {
waitHandle1, waitHandle2, waitHandle3
};
int index;
for (int countWaits = 0; countWaits <= 2; countWaits++)
{
// WaitAny waits for any of the processes to
// complete. The return value is either the index
// of the array element whose process just
// completed, or the WaitTimeout value.
index = WaitHandle.WaitAny(waitHandles,
60000, false);
// This example doesn't actually do anything with
// the data returned by the processes, but the
// code opens readers for each just to demonstrate
// the concept.
// Instead of using the returned data to fill the
// controls on the page, the example adds the time
// the process was completed to the corresponding
// text box.
switch (index)
{
case 0:
SqlDataReader reader1;
reader1 =
command1.EndExecuteReader(result1);
if (reader1.Read())
{
TextBox1.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader1.Close();
break;
case 1:
SqlDataReader reader2;
reader2 =
command2.EndExecuteReader(result2);
if (reader2.Read())
{
TextBox2.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader2.Close();
break;
case 2:
SqlDataReader reader3;
reader3 =
command3.EndExecuteReader(result3);
if (reader3.Read())
{
TextBox3.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader3.Close();
break;
case WaitHandle.WaitTimeout:
throw new Exception("Timeout");
break;
}
}
}
catch (Exception ex)
{
TextBox4.Text = ex.ToString();
}
connection1.Close();
connection2.Close();
connection3.Close();
}
Ejemplo: Modelo Wait (All)
En el ejemplo siguiente se ilustra el modelo Wait (All). Una vez iniciados tres procesos asincrónicos, se llama al método WaitAll para esperar a que los procesos se completen o agoten el tiempo de espera.
Al igual que en el ejemplo del modelo Wait (Any), la hora en que se completa el proceso se agrega al cuadro de texto correspondiente al proceso. De nuevo, las horas de los cuadros de texto ilustran el punto: el código que sigue al método WaitAny solo se ejecuta una vez completados todos los procesos.
Para configurar este ejemplo, cree un proyecto de sitio web de ASP.NET. Coloque un control Button y cuatro controles TextBox en la página (aceptando el nombre predeterminado de cada control).
Agregue el código siguiente a la clase del formulario y modifique la cadena de conexión según sea necesario para su entorno.
' Add these to the top of the class
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Threading
' Add this code to the page's class:
Private Function GetConnectionString() As String
' To avoid storing the connection string in your code,
' you can retrieve it from a configuration file.
' If you have not included "Asynchronous Processing=true"
' in the connection string, the command will not be able
' to execute asynchronously.
Return "..." & _
"Asynchronous Processing=true"
End Function
Sub Button1_Click( _
ByVal sender As Object, ByVal e As System.EventArgs)
' In a real-world application, you might be connecting to
' three different servers or databases. For the example,
' we connect to only one.
Dim connection1 As New SqlConnection(GetConnectionString())
Dim connection2 As New SqlConnection(GetConnectionString())
Dim connection3 As New SqlConnection(GetConnectionString())
' To keep the example simple, all three asynchronous
' processes select a row from the same table. WAITFOR
' commands are used to emulate long-running processes
' that complete after different periods of time.
Dim commandText1 As String = _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint + 1 " & _
"WHERE ReorderPoint Is Not Null;" & _
"WAITFOR DELAY '0:0:01';" & _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint - 1 " & _
"WHERE ReorderPoint Is Not Null"
Dim commandText2 As String = _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint + 1 " & _
"WHERE ReorderPoint Is Not Null;" & _
"WAITFOR DELAY '0:0:05';" & _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint - 1 " & _
"WHERE ReorderPoint Is Not Null"
Dim commandText3 As String = _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint + 1 " & _
"WHERE ReorderPoint Is Not Null;" & _
"WAITFOR DELAY '0:0:10';" & _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint - 1 " & _
"WHERE ReorderPoint Is Not Null"
Dim waitHandles(2) As WaitHandle
Try
' For each process, open a connection and begin execution.
' Use the IAsyncResult object returned by
' BeginExecuteReader to add a WaitHandle for the process
' to the array.
connection1.Open()
Dim command1 As New SqlCommand(commandText1, connection1)
Dim result1 As IAsyncResult = _
command1.BeginExecuteNonQuery()
waitHandles(0) = result1.AsyncWaitHandle
connection2.Open()
Dim command2 As New SqlCommand(commandText2, connection2)
Dim result2 As IAsyncResult = _
command2.BeginExecuteNonQuery()
waitHandles(1) = result2.AsyncWaitHandle
connection3.Open()
Dim command3 As New SqlCommand(commandText3, connection3)
Dim result3 As IAsyncResult = _
command3.BeginExecuteNonQuery()
waitHandles(2) = result3.AsyncWaitHandle
' WaitAll waits for all of the processes to complete.
' The return value is True if all processes completed,
' False if any process timed out.
Dim result As Boolean = _
WaitHandle.WaitAll(waitHandles, 60000, False)
If result Then
Dim rowCount1 As Long = _
command1.EndExecuteNonQuery(result1)
TextBox1.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
Dim rowCount2 As Long = _
command2.EndExecuteNonQuery(result2)
TextBox2.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
Dim rowCount3 As Long = _
command3.EndExecuteNonQuery(result3)
TextBox3.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
Else
Throw New Exception("Timeout")
End If
Catch ex As Exception
TextBox4.Text = ex.ToString
End Try
connection1.Close()
connection2.Close()
connection3.Close()
End Sub
// Add the following using directives, if they aren't already there.
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Threading;
using System.Data.SqlClient;
// Add this code to the page's class
string GetConnectionString()
// To avoid storing the connection string in your code,
// you can retrieve it from a configuration file.
// If you have not included "Asynchronous Processing=true"
// in the connection string, the command will not be able
// to execute asynchronously.
{
return "..." +
"Asynchronous Processing=true";
}
void Button1_Click(object sender, System.EventArgs e)
{
// In a real-world application, you might be connecting to
// three different servers or databases. For the example,
// we connect to only one.
SqlConnection connection1 =
new SqlConnection(GetConnectionString());
SqlConnection connection2 =
new SqlConnection(GetConnectionString());
SqlConnection connection3 =
new SqlConnection(GetConnectionString());
// To keep the example simple, all three asynchronous
// processes execute UPDATE queries that result in
// no change to the data. WAITFOR
// commands are used to emulate long-running processes
// that complete after different periods of time.
string commandText1 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:01';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
string commandText2 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:05';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
string commandText3 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:10';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
try
// For each process, open a connection and begin
// execution. Use the IAsyncResult object returned by
// BeginExecuteReader to add a WaitHandle for the
// process to the array.
{
connection1.Open();
SqlCommand command1 =
new SqlCommand(commandText1, connection1);
IAsyncResult result1 = command1.BeginExecuteNonQuery();
WaitHandle waitHandle1 = result1.AsyncWaitHandle;
connection2.Open();
SqlCommand command2 =
new SqlCommand(commandText2, connection2);
IAsyncResult result2 = command2.BeginExecuteNonQuery();
WaitHandle waitHandle2 = result2.AsyncWaitHandle;
connection3.Open();
SqlCommand command3 =
new SqlCommand(commandText3, connection3);
IAsyncResult result3 = command3.BeginExecuteNonQuery();
WaitHandle waitHandle3 = result3.AsyncWaitHandle;
WaitHandle[] waitHandles = {
waitHandle1, waitHandle2, waitHandle3
};
bool result;
// WaitAll waits for all of the processes to
// complete. The return value is True if the processes
// all completed successfully, False if any process
// timed out.
result = WaitHandle.WaitAll(waitHandles, 60000, false);
if(result)
{
long rowCount1 =
command1.EndExecuteNonQuery(result1);
TextBox1.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
long rowCount2 =
command2.EndExecuteNonQuery(result2);
TextBox2.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
long rowCount3 =
command3.EndExecuteNonQuery(result3);
TextBox3.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
}
else
{
throw new Exception("Timeout");
}
}
catch (Exception ex)
{
TextBox4.Text = ex.ToString();
}
connection1.Close();
connection2.Close();
connection3.Close();
}