Edit

Share via

Previewing TV Audio

  • Article

[The feature associated with this page, DirectShow, is a legacy feature. It has been superseded by MediaPlayer, IMFMediaEngine, and Audio/Video Capture in Media Foundation. Those features have been optimized for Windows 10 and Windows 11. Microsoft strongly recommends that new code use MediaPlayer, IMFMediaEngine and Audio/Video Capture in Media Foundation instead of DirectShow, when possible. Microsoft suggests that existing code that uses the legacy APIs be rewritten to use the new APIs if possible.]

To preview TV audio, route the Audio Decoder pin on the crossbar filter to the Audio Tuner pin. To mute the audio, route the Audio Decoder pin to -1, as shown in the following diagram. (Crossbar filters are described in Working with Crossbars.)

routing the audio decoder pin

The basic approach is as follows:

  1. Use the ICaptureGraphBuilder2::FindInterface method to locate the crossbar filter.
  2. Use the IAMCrossbar::get_CrossbarPinInfo method to enumerate the crossbar filter's input and output pins. Search for an audio decoder output pin and an audio tuner input pin.
  3. If you find the correct pins, call IAMCrossbar::Route to route the pins. If not, look upstream for another crossbar and repeat the process.
  4. To mute the audio, route the audio decoder pin to -1.

Most TV tuners use a single crossbar filter, but some use two crossbar filters. Therefore, you might have to search for a second crossbar if the first one fails.

Note

Contrary to what you might expect, no audio capture filter or audio renderer is required to preview the audio, because there is a physical connection between the tuner card and the sound card.

 

The following code shows these steps in more detail. First, here is a helper function that searches a crossbar filter for a specified pin type:

HRESULT FindCrossbarPin(
    IAMCrossbar *pXBar,                 // Pointer to the crossbar.
    PhysicalConnectorType PhysicalType, // Pin type to match.
    PIN_DIRECTION Dir,                  // Pin direction.
    long *pIndex)       // Receives the index of the pin, if found.
{
    BOOL bInput = (Dir == PINDIR_INPUT ? TRUE : FALSE);

    // Find out how many pins the crossbar has.
    long cOut, cIn;
    HRESULT hr = pXBar->get_PinCounts(&cOut, &cIn);
    if (FAILED(hr)) return hr;
    // Enumerate pins and look for a matching pin.
    long count = (bInput ? cIn : cOut);
    for (long i = 0; i < count; i++)
    {
        long iRelated = 0;
        long ThisPhysicalType = 0;
        hr = pXBar->get_CrossbarPinInfo(bInput, i, &iRelated,
            &ThisPhysicalType);
        if (SUCCEEDED(hr) && ThisPhysicalType == PhysicalType)
        {
            // Found a match, return the index.
            *pIndex = i;
            return S_OK;
        }
    }
    // Did not find a matching pin.
    return E_FAIL;
}

The next function attempts to activate or mute the audio, depending on the value of the bActivate parameter. It searches the specified crossbar filter for the required pins. If it cannot find them, it returns an error code.

HRESULT ConnectAudio(IAMCrossbar *pXBar, BOOL bActivate)
{
    // Look for the Audio Decoder output pin.
    long i = 0;
    HRESULT hr = FindCrossbarPin(pXBar, PhysConn_Audio_AudioDecoder,
        PINDIR_OUTPUT, &i);
    if (SUCCEEDED(hr))
    {
        if (bActivate)  // Activate the audio. 
        {
            // Look for the Audio Tuner input pin.
            long j = 0;
            hr = FindCrossbarPin(pXBar, PhysConn_Audio_Tuner, 
                PINDIR_INPUT, &j);
            if (SUCCEEDED(hr))
            {
                return pXBar->Route(i, j);
            }
        }
        else  // Mute the audio
        {
            return pXBar->Route(i, -1);
        }
    }
    return E_FAIL;
}

The next function searches the filter graph for a crossbar filter. If it finds one, it attempts to activate or mute the audio (using the previous function). If that operation fails, the method searches upstream for a second crossbar and tries again. For a more generalized approach to managing multiple crossbar filters in a graph, see the CCrossbar class in the AmCap sample application.

HRESULT ActivateAudio(ICaptureGraphBuilder2 *pBuild, IBaseFilter *pSrc,
  BOOL bActivate)
{
    // Search upstream for a crossbar.
    IAMCrossbar *pXBar1 = NULL;
    HRESULT hr = pBuild->FindInterface(&LOOK_UPSTREAM_ONLY, NULL, pSrc,
        IID_IAMCrossbar, (void**)&pXBar1);
    if (SUCCEEDED(hr)) 
    {
        hr = ConnectAudio(pXBar1, bActivate);
        if (FAILED(hr))
        {
            // Look for another crossbar.
            IBaseFilter *pF = NULL;
            hr = pXBar1->QueryInterface(IID_IBaseFilter, (void**)&pF);
            if (SUCCEEDED(hr)) 
            {
                // Search upstream for another one.
                IAMCrossbar *pXBar2 = NULL;
                hr = pBuild->FindInterface(&LOOK_UPSTREAM_ONLY, NULL, pF,
                    IID_IAMCrossbar, (void**)&pXBar2);
                pF->Release();
                if (SUCCEEDED(hr))
                {
                    hr = ConnectAudio(pXBar2, bActivate);
                    pXBar2->Release();
                }
            }
        }
        pXBar1->Release();
    }
    return hr;
}

The following code shows how to call these functions:

// Build the analog TV graph (not shown).
// Activate the audio.
hr = ActivateAudio(pBuild, pCap, TRUE);
// Later, mute the audio.
hr = ActivateAudio(pBuild, pCap, FALSE);

Note that these example functions repeat many of the same function calls. For example, they enumerate the crossbar pins each time. In a real application, you might cache some of this information.

Analog Television Audio

Working with Crossbars