WOW64_LDT_ENTRY structure (winnt.h)
Describes an entry in the descriptor table for a 32-bit thread on a 64-bit system. This structure is valid only on 64-bit systems.
Syntax
typedef struct _WOW64_LDT_ENTRY {
WORD LimitLow;
WORD BaseLow;
union {
struct {
BYTE BaseMid;
BYTE Flags1;
BYTE Flags2;
BYTE BaseHi;
} Bytes;
struct {
DWORD BaseMid : 8;
DWORD Type : 5;
DWORD Dpl : 2;
DWORD Pres : 1;
DWORD LimitHi : 4;
DWORD Sys : 1;
DWORD Reserved_0 : 1;
DWORD Default_Big : 1;
DWORD Granularity : 1;
DWORD BaseHi : 8;
} Bits;
} HighWord;
} WOW64_LDT_ENTRY, *PWOW64_LDT_ENTRY;
Members
LimitLow
The low-order part of the address of the last byte in the segment.
BaseLow
The low-order part of the base address of the segment.
HighWord
The high-order portion of the descriptor. This member may be interpreted as bytes or collections of bits, depending on the level of detail required.
HighWord.Bytes
HighWord.Bytes.BaseMid
Middle bits (16–23) of the base address of the segment.
HighWord.Bytes.Flags1
Values of the Type, Dpl, and Pres members in the Bits structure.
HighWord.Bytes.Flags2
Values of the LimitHi, Sys, Reserved_0, Default_Big, and Granularity members in the Bits structure.
HighWord.Bytes.BaseHi
High bits (24–31) of the base address of the segment.
HighWord.Bits
HighWord.Bits.BaseMid
The middle bits (16–23) of the base address of the segment.
HighWord.Bits.Type
The type of segment. This member can be one of the following values:
HighWord.Bits.Dpl
The privilege level of the descriptor. This member is an integer value in the range 0 (most privileged) through 3 (least privileged).
HighWord.Bits.Pres
The present flag. This member is 1 if the segment is present in physical memory or 0 if it is not.
HighWord.Bits.LimitHi
The high bits (16–19) of the address of the last byte in the segment.
HighWord.Bits.Sys
The space that is available to system programmers. This member might be used for marking segments in some system-specific way.
HighWord.Bits.Reserved_0
Reserved.
HighWord.Bits.Default_Big
The size of segment. If the segment is a data segment, this member contains 1 if the segment is larger than 64 kilobytes (KB) or 0 if the segment is smaller than or equal to 64 KB.
If the segment is a code segment, this member contains 1. The segment runs with the default (native mode) instruction set.
HighWord.Bits.Granularity
The granularity. This member contains 0 if the segment is byte granular, 1 if the segment is page granular.
HighWord.Bits.BaseHi
The high bits (24–31) of the base address of the segment.
Remarks
The Wow64GetThreadSelectorEntry function fills this structure with information from an entry in the descriptor table. You can use this information to convert a segment-relative address to a linear virtual address.
The base address of a segment is the address of offset 0 in the segment. To calculate this value, combine the BaseLow, BaseMid, and BaseHi members.
The limit of a segment is the address of the last byte that can be addressed in the segment. To calculate this value, combine the LimitLow and LimitHi members.
The WOW64_LDT_ENTRY structure has the same layout for a 64-bit process as the LDT_ENTRY structure has for a 32-bit process.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 7 [desktop apps only] |
| Minimum supported server | Windows Server 2008 R2 [desktop apps only] |
| Header | winnt.h (include Windows.h) |