Edit

Share via

D3D11_RESOURCE_MISC_FLAG enumeration (d3d11.h)

  • Article

Identifies options for resources.

Syntax

typedef enum D3D11_RESOURCE_MISC_FLAG {
  D3D11_RESOURCE_MISC_GENERATE_MIPS = 0x1L,
  D3D11_RESOURCE_MISC_SHARED = 0x2L,
  D3D11_RESOURCE_MISC_TEXTURECUBE = 0x4L,
  D3D11_RESOURCE_MISC_DRAWINDIRECT_ARGS = 0x10L,
  D3D11_RESOURCE_MISC_BUFFER_ALLOW_RAW_VIEWS = 0x20L,
  D3D11_RESOURCE_MISC_BUFFER_STRUCTURED = 0x40L,
  D3D11_RESOURCE_MISC_RESOURCE_CLAMP = 0x80L,
  D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX = 0x100L,
  D3D11_RESOURCE_MISC_GDI_COMPATIBLE = 0x200L,
  D3D11_RESOURCE_MISC_SHARED_NTHANDLE = 0x800L,
  D3D11_RESOURCE_MISC_RESTRICTED_CONTENT = 0x1000L,
  D3D11_RESOURCE_MISC_RESTRICT_SHARED_RESOURCE = 0x2000L,
  D3D11_RESOURCE_MISC_RESTRICT_SHARED_RESOURCE_DRIVER = 0x4000L,
  D3D11_RESOURCE_MISC_GUARDED = 0x8000L,
  D3D11_RESOURCE_MISC_TILE_POOL = 0x20000L,
  D3D11_RESOURCE_MISC_TILED = 0x40000L,
  D3D11_RESOURCE_MISC_HW_PROTECTED = 0x80000L,
  D3D11_RESOURCE_MISC_SHARED_DISPLAYABLE,
  D3D11_RESOURCE_MISC_SHARED_EXCLUSIVE_WRITER
} ;

Constants

 
D3D11_RESOURCE_MISC_GENERATE_MIPS
Value: 0x1L
Enables MIP map generation by using ID3D11DeviceContext::GenerateMips on a texture resource. The resource must be created with the bind flags that specify that the resource is a render target and a shader resource.
D3D11_RESOURCE_MISC_SHARED
Value: 0x2L
Enables resource data sharing between two or more Direct3D devices. The only resources that can be shared are 2D non-mipmapped textures.


D3D11_RESOURCE_MISC_SHARED and D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX are mutually exclusive.


WARP and REF devices do not support shared resources.
If you try to create a resource with this flag on either a WARP or REF device, the create method will return an E_OUTOFMEMORY error code.


Note  Starting with Windows 8, WARP devices fully support shared resources.

 

Note  Starting with Windows 8, we recommend that you enable resource data sharing between two or more Direct3D devices by using a combination of the D3D11_RESOURCE_MISC_SHARED_NTHANDLE and D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flags instead.

 
D3D11_RESOURCE_MISC_TEXTURECUBE
Value: 0x4L
Sets a resource to be a cube texture created from a Texture2DArray that contains 6 textures.
D3D11_RESOURCE_MISC_DRAWINDIRECT_ARGS
Value: 0x10L
Enables instancing of GPU-generated content.
D3D11_RESOURCE_MISC_BUFFER_ALLOW_RAW_VIEWS
Value: 0x20L
Enables a resource as a byte address buffer.
D3D11_RESOURCE_MISC_BUFFER_STRUCTURED
Value: 0x40L
Enables a resource as a structured buffer.
D3D11_RESOURCE_MISC_RESOURCE_CLAMP
Value: 0x80L
Enables a resource with MIP map clamping for use with ID3D11DeviceContext::SetResourceMinLOD.
D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX
Value: 0x100L
Enables the resource to be synchronized by using the IDXGIKeyedMutex::AcquireSync and
IDXGIKeyedMutex::ReleaseSync APIs.
The following Direct3D 11 resource creation APIs, that take D3D11_RESOURCE_MISC_FLAG parameters, have been extended to support the new flag.


If you call any of these methods with the D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag set, the interface returned will support the IDXGIKeyedMutex interface. You can retrieve a pointer to the IDXGIKeyedMutex interface from the resource by using IUnknown::QueryInterface. The IDXGIKeyedMutex interface implements the IDXGIKeyedMutex::AcquireSync and IDXGIKeyedMutex::ReleaseSync APIs to synchronize access to the surface. The device that creates the surface, and any other device that opens the surface by using OpenSharedResource, must call IDXGIKeyedMutex::AcquireSync before they issue any rendering commands to the surface. When those devices finish rendering, they must call IDXGIKeyedMutex::ReleaseSync.


D3D11_RESOURCE_MISC_SHARED and D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX are mutually exclusive.


WARP and REF devices do not support shared resources.
If you try to create a resource with this flag on either a WARP or REF device, the create method will return an E_OUTOFMEMORY error code.


Note  Starting with Windows 8, WARP devices fully support shared resources.

 
D3D11_RESOURCE_MISC_GDI_COMPATIBLE
Value: 0x200L
Enables a resource compatible with GDI. You must set the D3D11_RESOURCE_MISC_GDI_COMPATIBLE flag on surfaces that you use with GDI. Setting the D3D11_RESOURCE_MISC_GDI_COMPATIBLE flag allows GDI rendering on the surface via IDXGISurface1::GetDC.


Consider the following programming tips for using D3D11_RESOURCE_MISC_GDI_COMPATIBLE when you create a texture or use that texture in a swap chain:


  • D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX and D3D11_RESOURCE_MISC_GDI_COMPATIBLE are mutually exclusive. Therefore, do not use them together.

  • D3D11_RESOURCE_MISC_RESOURCE_CLAMP and D3D11_RESOURCE_MISC_GDI_COMPATIBLE are mutually exclusive. Therefore, do not use them together.

  • You must bind the texture as a render target for the output-merger stage. For example, set the D3D11_BIND_RENDER_TARGET flag in the BindFlags member of the D3D11_TEXTURE2D_DESC structure.

  • You must set the maximum number of MIP map levels to 1. For example, set the MipLevels member of the D3D11_TEXTURE2D_DESC structure to 1.

  • You must specify that the texture requires read and write access by the GPU. For example, set the Usage member of the D3D11_TEXTURE2D_DESC structure to D3D11_USAGE_DEFAULT.


  • You must set the texture format to one of the following types.


    • DXGI_FORMAT_B8G8R8A8_UNORM

    • DXGI_FORMAT_B8G8R8A8_TYPELESS

    • DXGI_FORMAT_B8G8R8A8_UNORM_SRGB

    For example, set the Format member of the D3D11_TEXTURE2D_DESC structure to one of these types.

  • You cannot use D3D11_RESOURCE_MISC_GDI_COMPATIBLE with multisampling. Therefore, set the Count member of the DXGI_SAMPLE_DESC structure to 1. Then, set the SampleDesc member of the D3D11_TEXTURE2D_DESC structure to this DXGI_SAMPLE_DESC structure.
D3D11_RESOURCE_MISC_SHARED_NTHANDLE
Value: 0x800L
Set this flag to enable the use of NT HANDLE values when you create a shared resource. By enabling this flag, you deprecate the use of existing HANDLE values.

The value specifies a new shared resource type that directs the runtime to use NT HANDLE values for the shared resource. The runtime then must confirm that the shared resource works on all hardware at the specified feature level.


Without this flag set, the runtime does not strictly validate shared resource parameters (that is, formats, flags, usage, and so on). When the runtime does not validate shared resource parameters, behavior of much of the Direct3D API might be undefined and might vary from driver to driver.

Direct3D 11 and earlier:  This value is not supported until Direct3D 11.1.
D3D11_RESOURCE_MISC_RESTRICTED_CONTENT
Value: 0x1000L
Set this flag to indicate that the resource might contain protected content; therefore, the operating system should use the resource only when the driver and hardware support content protection. If the driver and hardware do not support content protection and you try to create a resource with this flag, the resource creation fails.

Direct3D 11:  This value is not supported until Direct3D 11.1.
D3D11_RESOURCE_MISC_RESTRICT_SHARED_RESOURCE
Value: 0x2000L
Set this flag to indicate that the operating system restricts access to the shared surface. You can use this flag together with the D3D11_RESOURCE_MISC_RESTRICT_SHARED_RESOURCE_DRIVER flag and only when you create a shared surface. The process that creates the shared resource can always open the shared resource.

Direct3D 11:  This value is not supported until Direct3D 11.1.
D3D11_RESOURCE_MISC_RESTRICT_SHARED_RESOURCE_DRIVER
Value: 0x4000L
Set this flag to indicate that the driver restricts access to the shared surface. You can use this flag in conjunction with the D3D11_RESOURCE_MISC_RESTRICT_SHARED_RESOURCE flag and only when you create a shared surface. The process that creates the shared resource can always open the shared resource.

Direct3D 11:  This value is not supported until Direct3D 11.1.
D3D11_RESOURCE_MISC_GUARDED
Value: 0x8000L
Set this flag to indicate that the resource is guarded. Such a resource is returned by the IDCompositionSurface::BeginDraw (DirectComposition) and ISurfaceImageSourceNative::BeginDraw (Windows Runtime) APIs. For these APIs, you provide a region of interest (ROI) on a surface to update. This surface isn't compatible with multiple render targets (MRT).

A guarded resource automatically restricts all writes to the region that is related to one of the preceding APIs. Additionally, the resource enforces access to the ROI with these restrictions:


Direct3D 11:  This value is not supported until Direct3D 11.1.
D3D11_RESOURCE_MISC_TILE_POOL
Value: 0x20000L
Set this flag to indicate that the resource is a tile pool.

Direct3D 11:  This value is not supported until Direct3D 11.2.
D3D11_RESOURCE_MISC_TILED
Value: 0x40000L
Set this flag to indicate that the resource is a tiled resource.

Direct3D 11:  This value is not supported until Direct3D 11.2.
D3D11_RESOURCE_MISC_HW_PROTECTED
Value: 0x80000L
Set this flag to indicate that the resource should be created such that it will be protected by the hardware. Resource creation will fail if hardware content protection is not supported.

This flag has the following restrictions:


  • This flag cannot be used with the following D3D11_USAGE values:

    • D3D11_USAGE_DYNAMIC

    • D3D11_USAGE_STAGING



  • This flag cannot be used with the following D3D11_BIND_FLAG values.

    • D3D11_BIND_VERTEX_BUFFER

    • D3D11_BIND_INDEX_BUFFER



  • No CPU access flags can be specified.


Note  

Creating a texture using this flag does not automatically guarantee that hardware protection will be enabled for the underlying allocation. Some implementations require that the DRM components are first initialized prior to any guarantees of protection.


 

Note  This enumeration value is supported starting with Windows 10.
D3D11_RESOURCE_MISC_SHARED_DISPLAYABLE
Enables the resource to work with the displayable surfaces feature. You must use D3D11_RESOURCE_MISC_SHARED_DISPLAYABLE in combination with both D3D11_RESOURCE_MISC_SHARED and D3D11_RESOURCE_MISC_SHARED_NTHANDLE.
D3D11_RESOURCE_MISC_SHARED_EXCLUSIVE_WRITER
TBD

Remarks

This enumeration is used in D3D11_BUFFER_DESC, D3D11_TEXTURE1D_DESC, D3D11_TEXTURE2D_DESC, D3D11_TEXTURE3D_DESC.

These flags can be combined by bitwise OR.

The D3D11_RESOURCE_MISC_FLAG cannot be used when creating resources with D3D11_CPU_ACCESS flags.

Requirements

Requirement Value
Header d3d11.h

See also

Resource Enumerations