EraseTape function (winbase.h)

The EraseTape function erases all or part of a tape.

Syntax

DWORD EraseTape(
  [in] HANDLE hDevice,
  [in] DWORD  dwEraseType,
  [in] BOOL   bImmediate
);

Parameters

[in] hDevice

Handle to the device where the tape is to be erased. This handle is created by using the CreateFile function.

[in] dwEraseType

Erasing technique. This parameter can be one of the following values.

Value Meaning
TAPE_ERASE_LONG
1L
Erases the tape from the current position to the end of the current partition.
TAPE_ERASE_SHORT
0L
Writes an erase gap or end-of-data marker at the current position.

[in] bImmediate

If this parameter is TRUE, the function returns immediately; if it is FALSE, the function does not return until the erase operation has been completed.

Return value

If the function succeeds, the return value is NO_ERROR.

If the function fails, it can return one of the following error codes.

Error code Description
ERROR_BEGINNING_OF_MEDIA
1102L
An attempt to access data before the beginning-of-medium marker failed.
ERROR_BUS_RESET
1111L
A reset condition was detected on the bus.
ERROR_DEVICE_NOT_PARTITIONED
1107L
The partition information could not be found when a tape was being loaded.
ERROR_END_OF_MEDIA
1100L
The end-of-tape marker was reached during an operation.
ERROR_FILEMARK_DETECTED
1101L
A filemark was reached during an operation.
ERROR_INVALID_BLOCK_LENGTH
1106L
The block size is incorrect on a new tape in a multivolume partition.
ERROR_MEDIA_CHANGED
1110L
The tape that was in the drive has been replaced or removed.
ERROR_NO_DATA_DETECTED
1104L
The end-of-data marker was reached during an operation.
ERROR_NO_MEDIA_IN_DRIVE
1112L
There is no media in the drive.
ERROR_NOT_SUPPORTED
50L
The tape driver does not support a requested function.
ERROR_PARTITION_FAILURE
1105L
The tape could not be partitioned.
ERROR_SETMARK_DETECTED
1103L
A setmark was reached during an operation.
ERROR_UNABLE_TO_LOCK_MEDIA
1108L
An attempt to lock the ejection mechanism failed.
ERROR_UNABLE_TO_UNLOAD_MEDIA
1109L
An attempt to unload the tape failed.
ERROR_WRITE_PROTECT
19L
The media is write protected.

Remarks

Some tape devices do not support certain tape operations. To determine your tape device's capabilities, see your tape device documentation and use the GetTapeParameters function.

Requirements

Requirement Value
Minimum supported client Windows XP [desktop apps only]
Minimum supported server Windows Server 2003 [desktop apps only]
Target Platform Windows
Header winbase.h (include Windows.h)
Library Kernel32.lib
DLL Kernel32.dll

See also

CreateFile

GetTapeParameters