Share via

Converged Traffic Test

  • Article

This test ensures that the test adapter supports concurrent network and disk input/output (I/O).

The Converged Traffic test runs the Disk Stress test against the storage array attached to the Fibre Channel over Ethernet (FCoE) adapter while simultaneously running NTttcp to stress network traffic through the same FCoE adapter. For additional NTttcp details, see How to Use NTttcp to Test Network Performance. For Disk Stress details, please see Disk Stress (LOGO).

Test details

   
Specifications
  • Device.Storage.Controller.Fcoe.Interoperability
Platforms
  • Windows Server 2016 (x64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 480
Category Scenario
Timeout (in minutes) 28800
Requires reboot false
Requires special configuration true
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: Fibre Channel Over Ethernet Testing Prerequisites.

To schedule the Converged Traffic test in HLK Studio, after the test has been selected, you must first select a secondary machine to be the receiver of network I/O. The ReceiverIPAddress should correspond to an FCoE network port on the primary machine. It should also be reachable from the secondary test machine via a network port on the same FCoE adapter that has a storage array attached. Please ensure that the port that the test is using is not being blocked by a firewall.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Device.Storage Testing.

More information

File list

File Location

logtest.vbs

<[testbinroot]>\nttest\driverstest\storage\wdk\

verify_ip_address.cmd

<[testbinroot]>\nttest\driverstest\storage\wdk\

 

Parameters

Parameter name Parameter description
WDKDeviceID
TestDuration Duration of the entire test in seconds.
BlockSize Block size of each transaction.
Scenarios Scenarios to execute
Settings Additional Settings
NTttcpReceiverIP IP Address of the recevier (test target) machine
NTttcpIoSize Length of buffer parameter
NTttcpQueueSize Queue size
NTttcpPort Port base parameter
NTttcpSessions Number of sessions