WDI_TLV_STATION_CAPABILITIES
WDI_TLV_STATION_CAPABILITIES is a TLV that contains the capabilities of a station.
TLV Type
0x11
Length
The sum (in bytes) of the sizes of all contained elements.
Values
| Type | Description |
|---|---|
| UINT32 | The scan SSID list size. |
| UINT32 | The desired BSSID list size. |
| UINT32 | The desired SSID list size. |
| UINT32 | The privacy exemption list size. |
| UINT32 | The key mapping table size. |
| UINT32 | The default key table size. |
| UINT32 | The maximum length of the WEP key value. |
| UINT32 | The maximum number per STA default key tables. |
| UINT8 | Supported QoS flags. Specifies whether the device supports WMM. Valid values are 0 (not supported) and 1 (supported). |
| UINT8 | Specifies whether host-FIPS mode is implemented. If the field is set to DOT11_EXTSTA_ATTRIBUTES_SAFEMODE_OID_SUPPORTED with no other bits set, the driver implements the 802.11 safe mode of operation. If the field is set to DOT11_EXTSTA_ATTRIBUTES_SAFEMODE_CERTIFIED, the NIC has received a validation certificate from the National Institute of Standards and Technology (NIST) under Federal Information Processing Standards (FIPS) Publication 140-2, Security Requirements for Cryptographic Modules. In this mode, the hardware is responsible for ensuring compliance to FIPS standard. If the field is set to zero (0), FIPS mode is not implemented by the NIC. |
| UINT8 | Specifies whether 802.11w MFP capability is supported. Valid values are 0 (not supported) and 1 (supported). |
| UINT8 | Specifies whether auto power save is supported. Valid values are 0 (not supported) and 1 (supported). |
| UINT8 | Specifies whether the adapter maintains the Station BSS List cache. Valid values are 0 (no) and 1 (yes). |
| UINT8 | Specifies whether the adapter may attempt association to a BSSID that is not specified in the Preferred BSSID list during a Station connect. Valid values are 0 (no) and 1 (yes). |
| UINT32 | The maximum supported Network Offload List size. |
| UINT8 | Specifies whether or not the adapter can track HESSIDs associated with SSIDs and connect/roam only to those APs that match the specified SSID+HESSID. Valid values are 0 (not supported) and 1 (supported). |
| UINT8 | Specifies whether the adapter can offload connectivity to networks belonging to specific HESSIDs. |
| UINT8 | Specifies whether disconnected standby is supported. Valid values are 0 (not supported) and 1 (supported). |
| UINT8 | Specifies whether the driver supports the Fine Time Measurement (FTM) protocol as an initiator. Valid values are 0 (not supported) and 1 (supported). |
| UINT8 | The maximum number of target STAs that can be queried per FTM request task. |
| UINT8 | Specifics whether the driver supports the FIPS mode. If the field is set to DOT11_EXTSTA_ATTRIBUTES_SAFEMODE_OID_SUPPORTED with no other bits set, the driver implements the 802.11 safe mode of operation. If the field is set to DOT11_EXTSTA_ATTRIBUTES_SAFEMODE_CERTIFIED the NIC has received a validation certificate from the National Institute of Standards and Technology (NIST) under Federal Information Processing Standards (FIPS) Publication 140-2, Security Requirements for Cryptographic Modules. In this mode the hardware is responsible for ensuring compliance to FIPS standard. If the field is set to zero (0), FIPS mode is not implemented by the NIC. Operating system support for FIPS is anticipated in a future release of Windows. NOTE that FIPS mode requires the driver to indicate support for WDI_AUTH_ALGO_WPA3 auth and WDI_CIPHER_ALGO_GCMP_256 cipher pairs in the unicast and multicast algo pairs. It must also indicate support for WDI_AUTH_ALGO_WPA3 auth and WDI_CIPHER_ALGO_BIP_GMAC_256 cipher in the Multicast Management algo pairs. |
Requirements
| Minimum supported client | Windows 10 |
| Minimum supported server | Windows Server 2016 |
| Header | Wditypes.hpp |