Edit

Share via

IRP structure (wdm.h)

  • Article

The IRP structure is a partially opaque structure that represents an I/O request packet. Undocumented members of the IRP structure are reserved, used only by the I/O manager or in some cases, by file system drivers (FSDs).

Syntax

typedef struct _IRP {
  CSHORT                    Type;
  USHORT                    Size;
  PMDL                      MdlAddress;
  ULONG                     Flags;
  union {
    struct _IRP     *MasterIrp;
    __volatile LONG IrpCount;
    PVOID           SystemBuffer;
  } AssociatedIrp;
  LIST_ENTRY                ThreadListEntry;
  IO_STATUS_BLOCK           IoStatus;
  KPROCESSOR_MODE           RequestorMode;
  BOOLEAN                   PendingReturned;
  CHAR                      StackCount;
  CHAR                      CurrentLocation;
  BOOLEAN                   Cancel;
  KIRQL                     CancelIrql;
  CCHAR                     ApcEnvironment;
  UCHAR                     AllocationFlags;
  union {
    PIO_STATUS_BLOCK UserIosb;
    PVOID            IoRingContext;
  };
  PKEVENT                   UserEvent;
  union {
    struct {
      union {
        PIO_APC_ROUTINE UserApcRoutine;
        PVOID           IssuingProcess;
      };
      union {
        PVOID                 UserApcContext;
#if ...
        _IORING_OBJECT        *IoRing;
#else
        struct _IORING_OBJECT *IoRing;
#endif
      };
    } AsynchronousParameters;
    LARGE_INTEGER AllocationSize;
  } Overlay;
  __volatile PDRIVER_CANCEL CancelRoutine;
  PVOID                     UserBuffer;
  union {
    struct {
      union {
        KDEVICE_QUEUE_ENTRY DeviceQueueEntry;
        struct {
          PVOID DriverContext[4];
        };
      };
      PETHREAD     Thread;
      PCHAR        AuxiliaryBuffer;
      struct {
        LIST_ENTRY ListEntry;
        union {
          struct _IO_STACK_LOCATION *CurrentStackLocation;
          ULONG                     PacketType;
        };
      };
      PFILE_OBJECT OriginalFileObject;
    } Overlay;
    KAPC  Apc;
    PVOID CompletionKey;
  } Tail;
} IRP;

Members

Type

Reserved for internal system use.

Size

Reserved for internal system use.

MdlAddress

Pointer to an MDL describing a user buffer, if the driver is using direct I/O, and the IRP major function code is one of the following:

  • IRP_MJ_READ

    The MDL describes an empty buffer that the device or driver fills in.

  • IRP_MJ_WRITE

    The MDL describes a buffer that contains data for the device or driver.

  • IRP_MJ_DEVICE_CONTROL or IRP_MJ_INTERNAL_DEVICE_CONTROL

    If the IOCTL code specifies the METHOD_IN_DIRECT transfer type, the MDL describes a buffer that contains data for the device or driver.

If the IOCTL code specifies the METHOD_OUT_DIRECT transfer type, the MDL describes an empty buffer that the device or driver fills in.

For more information about the buffers that are associated with METHOD_IN_DIRECT and METHOD_OUT_DIRECT transfer types in IOCTL codes, see Buffer Descriptions for I/O Control Codes.

If the driver is not using direct I/O, this pointer is NULL.

Flags

File system drivers use this field, which is read-only for all drivers. Network and, possibly, highest-level device drivers also might read this field. This field is set either to zero or to the bitwise-OR of one or more of the following system-defined flag bits:

  • IRP_NOCACHE
  • IRP_PAGING_IO
  • IRP_MOUNT_COMPLETION
  • IRP_SYNCHRONOUS_API
  • IRP_ASSOCIATED_IRP
  • IRP_BUFFERED_IO
  • IRP_DEALLOCATE_BUFFER
  • IRP_INPUT_OPERATION
  • IRP_SYNCHRONOUS_PAGING_IO
  • IRP_CREATE_OPERATION
  • IRP_READ_OPERATION
  • IRP_WRITE_OPERATION
  • IRP_CLOSE_OPERATION
  • IRP_DEFER_IO_COMPLETION
  • IRP_OB_QUERY_NAME
  • IRP_HOLD_DEVICE_QUEUE
  • IRP_UM_DRIVER_INITIATED_IO

AssociatedIrp

Reserved for internal system use.

AssociatedIrp.MasterIrp

Pointer to the master IRP in an IRP that was created by a highest-level driver's call to IoMakeAssociatedIrp.

AssociatedIrp.IrpCount

Reserved for internal system use.

AssociatedIrp.SystemBuffer

Pointer to a system-space buffer.

If the driver is using buffered I/O, the buffer's purpose is determined by the IRP major function code, as follows:

  • SystemBuffer.IRP_MJ_READ

    The buffer receives data from the device or driver. The buffer's length is specified by Parameters.Read.Length in the driver's IO_STACK_LOCATION structure.

  • SystemBuffer.IRP_MJ_WRITE

    The buffer supplies data for the device or driver. The buffer's length is specified by Parameters.Write.Length in the driver's IO_STACK_LOCATION structure.

  • SystemBuffer.IRP_MJ_DEVICE_CONTROL or IRP_MJ_INTERNAL_DEVICE_CONTROL

    The buffer represents both the input and output buffers that are supplied to DeviceIoControl and IoBuildDeviceIoControlRequest. Output data overwrites input data.

For input, the buffer's length is specified by Parameters.DeviceIoControl.InputBufferLength in the driver's IO_STACK_LOCATION structure.

For output, the buffer's length is specified by Parameters.DeviceIoControl.OutputBufferLength in the driver's IO_STACK_LOCATION structure.

For more information, see Buffer Descriptions for I/O Control Codes.

The buffer represents the input buffer that is supplied to DeviceIoControl and IoBuildDeviceIoControlRequest.

The buffer's length is specified by Parameters.DeviceIoControl.InputBufferLength in the driver's IO_STACK_LOCATION structure.

For more information, see Buffer Descriptions for I/O Control Codes.

If the driver is using direct I/O, the buffer's purpose is determined by the IRP major function code, as follows:

ThreadListEntry

Reserved for internal system use.

IoStatus

Contains the IO_STATUS_BLOCK structure in which a driver stores status and information before calling IoCompleteRequest.

RequestorMode

Indicates the execution mode of the original requester of the operation, one of UserMode or KernelMode.

PendingReturned

If set to TRUE, a driver has marked the IRP pending. Each IoCompletion routine should check the value of this flag. If the flag is TRUE, and if the IoCompletion routine will not return STATUS_MORE_PROCESSING_REQUIRED, the routine should call IoMarkIrpPending to propagate the pending status to drivers above it in the device stack.

StackCount

Reserved for internal system use.

CurrentLocation

Reserved for internal system use.

Cancel

If set to TRUE, the IRP either is or should be canceled.

CancelIrql

Contains the IRQL at which a driver is running when IoAcquireCancelSpinLock is called.

ApcEnvironment

Reserved for internal system use.

AllocationFlags

Reserved for internal system use.

UserIosb

Reserved for internal system use.

IoRingContext

Reserved for internal system use.

UserEvent

Reserved for internal system use.

Overlay

Reserved for internal system use.

Overlay.AsynchronousParameters

Reserved for internal system use.

Overlay.AsynchronousParameters.UserApcRoutine

Reserved for internal system use.

Overlay.AsynchronousParameters.IssuingProcess

Reserved for internal system use.

Overlay.AsynchronousParameters.UserApcContext

Reserved for internal system use.

Overlay.AsynchronousParameters.IoRing

Reserved for internal system use.

Overlay.AllocationSize

Reserved for internal system use.

CancelRoutine

Contains the entry point for a driver-supplied Cancel routine to be called if the IRP is canceled. NULL indicates that the IRP is not currently cancelable.

UserBuffer

Contains the address of an output buffer if both of the following conditions apply:

For METHOD_BUFFERED, the driver should use the buffer pointed to by Irp->AssociatedIrp.SystemBuffer as the output buffer. When the driver completes the request, the I/O manager copies the contents of this buffer to the output buffer that is pointed to by Irp->UserBuffer. The driver should not write directly to the buffer pointed to by Irp->UserBuffer. For more information, see Buffer Descriptions for I/O Control Codes.

Tail

Reserved for internal system use.

Tail.Overlay

Reserved for internal system use.

Tail.Overlay.DeviceQueueEntry

If IRPs are queued in the device queue associated with the driver's device object, this field links IRPs in the device queue. These links can be used only while the driver is processing the IRP.

Tail.Overlay.DriverContext[4]

If IRPs are not queued in the device queue associated with the driver's device object, this field can be used by the driver to store up to four pointers. This field can be used only while the driver owns the IRP.

Tail.Overlay.Thread

A pointer to the caller's thread control block (TCB). For requests that originate in user-mode, the I/O manager always sets this field to point to the TCB of the thread that issued the request.

Tail.Overlay.AuxiliaryBuffer

Reserved for internal system use.

Tail.Overlay.ListEntry

If a driver manages its own internal queues of IRPs, it uses this field to link one IRP to the next. These links can be used only while the driver is holding the IRP in its queue or is processing the IRP.

Tail.Overlay.CurrentStackLocation

Reserved for internal system use.

Tail.Overlay.PacketType

Reserved for internal system use.

Tail.Overlay.OriginalFileObject

Reserved for internal system use.

Tail.Apc

Reserved for internal system use.

Tail.CompletionKey

Reserved for internal system use.

Remarks

Undocumented members of the IRP structure are reserved, used only by the I/O manager or in some cases, by file system drivers (FSDs).

An IRP is the basic I/O manager structure used to communicate with drivers and to allow drivers to communicate with each other. A packet consists of two different parts:

  • Header, or fixed part of the packet— This is used by the I/O manager to store information about the original request, such as the caller's device-independent parameters, the address of the device object upon which a file is open, and so on. It is also used by drivers to store information such as the final status of the request.

  • I/O stack locations — Following the header is a set of I/O stack locations, one per driver in the chain of layered drivers for which the request is bound. Each stack location contains the parameters, function codes, and context used by the corresponding driver to determine what it is supposed to be doing. For more information, see the IO_STACK_LOCATION structure.

While a higher-level driver might check the value of the Cancel Boolean in an IRP, that driver cannot assume the IRP will be completed with STATUS_CANCELLED by a lower-level driver even if the value is TRUE.

Requirements

Requirement Value
Header wdm.h (include Wdm.h, Ntddk.h, Ntifs.h)

See also