WdfDmaTransactionSetDeviceAddressOffset function (wdfdmatransaction.h)

Article
02/22/2024

[Applies to KMDF only]

The WdfDmaTransactionSetDeviceAddressOffset method specifies the offset of the register that the system DMA controller will access when performing the DMA operation.

Syntax

void WdfDmaTransactionSetDeviceAddressOffset(
  [in] WDFDMATRANSACTION DmaTransaction,
  [in] ULONG             Offset
);

Parameters

[in] DmaTransaction

A handle to a DMA transaction object that specifies the transaction to modify.

[in] Offset

The offset of the register, from the DeviceAddress specified in WDF_DMA_SYSTEM_PROFILE_CONFIG, to or from which DMA should be performed.

Return value

None

Remarks

WdfDmaTransactionSetDeviceAddressOffset must be used with a DMA enabler that specifies a system-mode DMA profile.

Framework-based drivers call WdfDmaTransactionSetDeviceAddressOffset after initializing a DMA transaction and before executing it.

A driver can use this method to access multiple registers within a device's register file.

For example, a driver might use DMA to access separate read and write registers in a device's register file.

To do so, the driver specifies the base address of the device's register file when configuring the enabler, and then sets the offset of the read or write register as necessary before executing the transaction.

If your driver calls this method on an operating system earlier than Windows 8, the framework's verifier reports an error.

Examples

The following code example initializes a DMA transaction. It then sets the offset of the register that the system DMA controller will access, provides a transfer completion callback routine, and executes the DMA transaction.

status = WdfDmaTransactionInitialize(
                                     RequestContext->DmaTransaction,
                                     EvtProgramDma,
                                     direction,
                                     mdl,
                                     startingVa,
                                     length
                                     );

if(!NT_SUCCESS(status)) {
    goto Complete;
}

WdfDmaTransactionSetDeviceAddressOffset(
                                        RequestContext->DmaTransaction,
                                        READ_DATA_REGISTER_OFFSET
                                        );

WdfDmaTransactionSetTransferCompleteCallback(
                                             RequestContext->DmaTransaction,
                                             EvtDmaTransactionDmaTransferComplete,
                                             RequestContext
                                             );

status = WdfDmaTransactionExecute(
                                  RequestContext->DmaTransaction, 
                                  RequestContext );

if(!NT_SUCCESS(status)) {
    goto Complete;
}

return status;

Complete:

WdfDmaTransactionRelease(
                         RequestContext->DmaTransaction
                         );

Requirements

Requirement	Value
Minimum supported client	Windows 8
Target Platform	Universal
Minimum KMDF version	1.11
Header	wdfdmatransaction.h (include Wdf.h)
Library	Wdf01000.sys (see Framework Library Versioning.)
IRQL	<=DISPATCH_LEVEL
DDI compliance rules	DriverCreate(kmdf)

Share via