PORT_CONFIGURATION_INFORMATION structure (srb.h)
PORT_CONFIGURATION_INFORMATION (SCSI) contains configuration information for an HBA. The OS-specific port driver allocates and initializes this structure, supplies as much HBA-specific configuration information as possible, and passes the structure to the miniport driver's HwScsiFindAdapter routine. The port driver gets some of the information for this structure from the miniport driver's HW_INITIALIZATION_DATA structure. The miniport driver's HwScsiFindAdapter routine is responsible for determining whether the miniport driver can support the HBA and, if so, for filling in the pertinent remaining information in the PORT_CONFIGURATION_INFORMATION structure.
Note
The SCSI port driver and SCSI miniport driver models may be altered or unavailable in the future. Use the Storport driver and Storport miniport driver models instead.
Syntax
typedef struct _PORT_CONFIGURATION_INFORMATION {
ULONG Length;
ULONG SystemIoBusNumber;
INTERFACE_TYPE AdapterInterfaceType;
ULONG BusInterruptLevel;
ULONG BusInterruptVector;
KINTERRUPT_MODE InterruptMode;
ULONG MaximumTransferLength;
ULONG NumberOfPhysicalBreaks;
ULONG DmaChannel;
ULONG DmaPort;
DMA_WIDTH DmaWidth;
DMA_SPEED DmaSpeed;
ULONG AlignmentMask;
ULONG NumberOfAccessRanges;
ACCESS_RANGE( ) *AccessRanges[];
PVOID Reserved;
UCHAR NumberOfBuses;
UCHAR InitiatorBusId[8];
BOOLEAN ScatterGather;
BOOLEAN Master;
BOOLEAN CachesData;
BOOLEAN AdapterScansDown;
BOOLEAN AtdiskPrimaryClaimed;
BOOLEAN AtdiskSecondaryClaimed;
BOOLEAN Dma32BitAddresses;
BOOLEAN DemandMode;
BOOLEAN MapBuffers;
BOOLEAN NeedPhysicalAddresses;
BOOLEAN TaggedQueuing;
BOOLEAN AutoRequestSense;
BOOLEAN MultipleRequestPerLu;
BOOLEAN ReceiveEvent;
BOOLEAN RealModeInitialized;
BOOLEAN BufferAccessScsiPortControlled;
UCHAR MaximumNumberOfTargets;
UCHAR ReservedUchars[2];
ULONG SlotNumber;
ULONG BusInterruptLevel2;
ULONG BusInterruptVector2;
KINTERRUPT_MODE InterruptMode2;
ULONG DmaChannel2;
ULONG DmaPort2;
DMA_WIDTH DmaWidth2;
DMA_SPEED DmaSpeed2;
ULONG DeviceExtensionSize;
ULONG SpecificLuExtensionSize;
ULONG SrbExtensionSize;
UCHAR Dma64BitAddresses;
BOOLEAN ResetTargetSupported;
UCHAR MaximumNumberOfLogicalUnits;
BOOLEAN WmiDataProvider;
} PORT_CONFIGURATION_INFORMATION, *PPORT_CONFIGURATION_INFORMATION;
Members
Length
Specifies the size of this structure in bytes. In effect, this member, which is always initialized by the OS-specific port driver, indicates the version of this structure used by the port driver.
SystemIoBusNumber
Specifies the system-assigned number of the I/O bus to which the HBA is connected. The OS-specific port driver always initializes this member. Its value is system-assigned because the platform might have several I/O buses of the given AdapterInterfaceType.
AdapterInterfaceType
Identifies the I/O bus interface. The OS-specific port driver always sets this member to the value specified by the miniport driver in the HW_INITIALIZATION_DATA (SCSI) structure.
BusInterruptLevel
Specifies the bus-relative interrupt request level. The OS-specific port driver makes no assumptions about the HBA's interrupt usage, so the default value is zero. Depending on the given AdapterInterfaceType and HBA, the value set for this member can correspond to the IRQL for the bus, such as for Isa and MicroChannel type buses. Drivers of Eisa HBAs must set this value to the bus-relative IRQL for the HBA if the adapter is configured for level-sensitive interrupts.
BusInterruptVector
Specifies the bus-relative vector returned by the HBA. The OS-specific port driver makes no assumptions about the HBA's interrupt usage, so the default value is zero. This member is irrelevant to drivers that set up the BusInterruptLevel member for their HBAs. It is pertinent for HBAs on types of I/O buses that use interrupt vectors, such as PCIBus.
InterruptMode
Specifies whether the HBA uses LevelSensitive or Latched (sometimes called "edge-triggered") interrupts. The OS-specific port driver initializes this member to an appropriate value for the bus and the device--for example, LevelSensitive for PCIBus. Drivers of Eisa HBAs must reset this value if the adapter is configured for level-sensitive interrupts, as must drivers of HBAs on I/O buses that use level-sensitive interrupts, such as MicroChannel type buses.
MaximumTransferLength
Specifies the maximum number of bytes the HBA can transfer in a single transfer operation. By default, the value of this member is SP_UNINITIALIZED_VALUE, which indicates an unlimited maximum transfer size. If its HBA has more limited transfer support, a miniport driver must reset this member according to the HBA's transfer capacity. If a miniport driver's HwScsiInterrupt routine cannot disable interrupts on the HBA, this member can be adjusted during driver development to ensure that time spent in that miniport driver's ISR does not cause the mouse to "jump" or serial/parallel throughput to drop to a user-noticeable level.
NumberOfPhysicalBreaks
Specifies the maximum number of breaks between address ranges that a data buffer can have if the HBA supports scatter/gather. In other words, the number of scatter/gather lists minus one. By default, the value of this member is SP_UNINITIALIZED_VALUE, which indicates the HBA can support an unlimited number of physical discontinuities. If the port driver sets a value for this member, the miniport driver can adjust the value lower but no higher. If this member is SP_UNINITIALIZED_VALUE, the miniport driver must reset this member according to the HBA's scatter/gather capacity, with zero representing no scatter/gather support.
DmaChannel
Specifies the DMA channel used by a subordinate HBA. By default, the value of this member is SP_UNINITIALIZED_VALUE. If the HBA uses a system DMA controller and the given AdapterInterfaceType is any value except MicroChannel, the miniport driver must reset this member.
DmaPort
Specifies the DMA port used by a subordinate HBA. By default, the value of this member is SP_UNINITIALIZED_VALUE. If the HBA uses a system DMA controller and the given AdapterInterfaceType is MicroChannel, the miniport driver must set this member.
DmaWidth
Specifies the width of DMA transfers if the HBA uses DMA. By default, the value of this member is zero. If its HBA does DMA, the miniport driver must reset this member to one of the following: Width8Bits, Width16Bits, or Width32Bits.
DmaSpeed
Specifies the DMA data-transfer speed for Eisa HBAs. By default, the value of this member specifies compatibility timing. Acceptable values for this member are any of the following: Compatible, TypeA, TypeB, or TypeC.
AlignmentMask
Contains a mask indicating the alignment restrictions for buffers required by the HBA for transfer operations. Valid mask values are also restricted by characteristics of the memory managers on different versions of Windows. The mask values that are permitted under Windows 95 or Windows 98 are 0 (byte aligned), 1 (word aligned) or 3 (DWORD aligned). Under Windows NT and Windows 2000 the valid mask values are 0 (byte aligned), 1 (word aligned), 3 (DWORD aligned) and 7 (double DWORD aligned). The miniport driver should set this mask if the HBA supports scatter/gather.
NumberOfAccessRanges
Specifies the number of AccessRanges elements in the array, described next. The OS-specific port driver always sets this member to the value passed in the HW_INITIALIZATION_DATA structure when the miniport driver called ScsiPortInitialize.
AccessRanges
Reserved
Reserved for system use and not available for use by miniport drivers.
NumberOfBuses
Specifies the number of SCSI buses controlled by the HBA. By default, the value of this member is zero.
InitiatorBusId[8]
Indicates the initiator bus ID. If the input InitiatorBusId[0] has the value zero, the miniport driver can assign a default value if its HBA does not require the use of particular value(s) determined by querying the HBA. Otherwise, the miniport driver should use any nonzero value assigned by the port driver if possible. Every miniport driver must update InitiatorBusId specifications to match what its HBA uses, if necessary querying the HBA to determine the appropriate values(s).
A miniport driver must set an entry for each SCSI bus supported by the HBA, as indicated by the value of NumberOfBuses.
ScatterGather
Indicates when TRUE that the HBA supports scatter/gather. When FALSE the HBA does not support scatter/gather. By default, the value of this member is FALSE.
Master
Indicates when TRUE that the HBA is a bus master. When FALSE, the HBA is not a bus master. By default, the value of this member is FALSE.
CachesData
Indicates when TRUE that the HBA caches data or maintains cached state on the peripherals. When FALSE the HBA does not cache data or maintain cached state on the peripherals. By default, the value of this member is FALSE. If this is reset to TRUE, the OS-specific port driver notifies the miniport driver when certain system events occur, such as file system cache flushes and system shutdown. For example, if a controller on the bus mirrors two disks, the miniport driver would normally set this member to TRUE.
AdapterScansDown
Indicates when TRUE that the BIOS for the HBA scans for SCSI bus targets from seven to zero. When FALSE, the BIOS for the HBA looks for SCSI bus targets, starting with an ID zero and scanning upwards to (but not including) MaximumTargetIds. By default, the value of AdapterScansDown is FALSE.
AtdiskPrimaryClaimed
Indicates when TRUE that the primary "AT" (WD1003-compatible) disk address range, 0x1F0 to 0x1FF, has been claimed in the registry by another driver for its device. The OS-specific port driver always initializes this member. If the input value of this member is TRUE, a miniport driver should assume that an already loaded driver has claimed the device range. If the input value is FALSE, a miniport driver can claim the address range for an HBA that emulates an "AT" disk controller and reset this member to TRUE, thereby preventing access to this range by the "AT" disk driver or subsequently loaded miniport drivers.
AtdiskSecondaryClaimed
Indicates when TRUE that the secondary AT disk address range, 0x170 to 0x17F has been claimed in the registry by another driver for its device. When FALSE the secondary AT disk address range has not been claimed in the registry by another driver. The OS-specific port driver always initializes this member. Miniport drivers should treat this member as for AtdiskPrimaryClaimed.
Dma32BitAddresses
Indicates when TRUE that the HBA has 32 address lines and can access memory with physical addresses greater than 0x00FFFFFF. When FALSE the HBA has either a number of DMA address lines other than 32. By default, the value of this member is FALSE. If the miniport driver sets Dma64BitAddresses, this member must be FALSE.
DemandMode
Indicates when TRUE that the system DMA controller should be programmed for demand-mode rather than single-cycle operations. If the HBA is not a subordinate device, this member should be FALSE.
MapBuffers
Indicates when TRUE that data buffers must be mapped to system virtual address ranges. When FALSE the data buffers do not have to be mapped to system virtual addresses. The OS-specific port driver always sets this member to the value passed in the HW_INITIALIZATION_DATA (SCSI) structure when the miniport driver called ScsiPortInitialize. A miniport driver can reset this value for any particular HBA it controls. If FALSE, the miniport driver must not access Srb.DataBuffer directly.
NeedPhysicalAddresses
Indicates when TRUE that the miniport driver must translate virtual addresses to physical addresses, as required by the HBA. When FALSE, the miniport driver does not have to translate virtual addresses to physical addresses. The OS-specific port driver always sets this member to the value passed in the HW_INITIALIZATION_DATA (SCSI) structure when the miniport driver called ScsiPortInitialize. A miniport driver can reset this value for any particular HBA it controls.
TaggedQueuing
Indicates when TRUE that the HBA supports queuing of multiple requests with SCSI tags. When FALSE, the HBA does not support SCSI-tagged queuing. The OS-specific port driver always sets this member to the value passed in the HW_INITIALIZATION_DATA (SCSI) structure when the miniport driver called ScsiPortInitialize. A miniport driver can reset this value for any particular HBA it controls.
AutoRequestSense
Indicates when TRUE that the HBA supports auto request sense. When FALSE the HBA does not support auto request sense. The OS-specific port driver always sets this member to the value passed in the HW_INITIALIZATION_DATA (SCSI) structure when the miniport driver called ScsiPortInitialize. A miniport driver can reset this value for any particular HBA it controls. This member must be set to TRUE before the driver of a bus-master HBA calls ScsiPortGetUncachedExtension.
MultipleRequestPerLu
Indicates when TRUE that the HBA supports multiple requests per logical unit. When FALSE the HBA does not support multiple requests per logical unit. The mechanism by which the adapter caches the requests is adapter-defined. The OS-specific port driver always sets this member to the value passed in the HW_INITIALIZATION_DATA (SCSI) structure when the miniport driver called ScsiPortInitialize. A miniport driver can reset this value for any particular HBA it controls.
ReceiveEvent
Indicates when TRUE that the HBA supports SCSI receive-event operations. When FALSE the HBA does not support SCSI receive-event operations. The OS-specific port driver always sets this member to the value passed in the HW_INITIALIZATION_DATA (SCSI) structure when the miniport driver called ScsiPortInitialize. A miniport driver can reset this value for any particular HBA it controls.
RealModeInitialized
Indicates when TRUE that an (x86-only) real-mode driver has already initialized the HBA. When FALSE the HBA has not been previously initialized by a real-mode driver. The OS-dependent port driver always initializes this member. If this is set to TRUE, the miniport driver must not initialize its HBA if the driver's initialization sequence is identical to real-mode HBA initialization; not reinitializing the HBA in these circumstances makes the miniport driver load much faster. The value of this member is irrelevant to any miniport driver that always initializes its HBA while running in protected mode on x86-based platforms and to all miniport drivers for which it is immaterial whether they are running on a CISC- or RISC-based platform.
BufferAccessScsiPortControlled
Indicates when TRUE that the miniport driver always calls ScsiPortXxx to access data buffers and/or request-sense information in SRBs, thereby allowing the OS-specific port driver to optimize I/O request processing. When FALSE the miniport driver does not have to call ScsiPortXxx routines to access data buffers or request-sense information. Setting this member to FALSE can degrade the I/O performance of the HBA. Calling routines other than the ScsiPortXxx makes a miniport driver nonportable across Microsoft operating systems.
MaximumNumberOfTargets
Specifies the number of target peripherals the HBA can control. By default, the value of this member is SCSI_MAXIMUM_TARGETS, according to the SCSI standard. A miniport driver can reset this member to a lesser value if the HBA has more limited capabilities or to a greater value, indicating that the HBA has wide-SCSI or Fibre Channel capabilities. This value is limited to SCSI_MAXIMUM_TARGETS_PER_BUS.
ReservedUchars[2]
Reserved for system use and not available for use by miniport drivers.
SlotNumber
Specifies the slot number of an HBA with matching values to the VendorId and DeviceId that were specified in the HW_INITIALIZATION_DATA (SCSI) structure when the miniport driver called ScsiPortInitialize.
BusInterruptLevel2
Reserved for system use and not available for use by miniport drivers.
BusInterruptVector2
Reserved for system use and not available for use by miniport drivers.
InterruptMode2
Reserved for system use and not available for use by miniport drivers.
DmaChannel2
Reserved for system use and not available for use by miniport drivers.
DmaPort2
Reserved for system use and not available for use by miniport drivers.
DmaWidth2
Reserved for system use and not available for use by miniport drivers.
DmaSpeed2
Reserved for system use and not available for use by miniport drivers.
DeviceExtensionSize
Specifies the size in bytes required by a miniport driver for its per-HBA device extension to handle data transfers larger than 64K, which might require larger scatter/gather lists than the size defined in the registry for this driver.
SpecificLuExtensionSize
Specifies the size in bytes required by the miniport driver for its per-logical-unit-storage, if any, to handle data transfers larger than 64K. Leave this member set to zero if the miniport driver does not maintain per-LU information for which it requires storage. This value is based on the assumption that the HBA is able to receive 32-bit addresses, regardless of what the controller can actually support. If additional space is needed in the LUN or SRB extensions to handle 64-bit addresses, then appropriate adjustments must be made to this value before using it with routines such as ScsiPortGetUncachedExtension.
SrbExtensionSize
Specifies the size in bytes required by the miniport driver for its per-request storage, if any, to handle data transfers larger than 64K. Set this member before calling ScsiPortGetUncachedExtension to change the size of per-request storage based on NumberOfPhysicalBreaks. Leave this member set to zero if the miniport driver does not maintain per-SRB information for which it requires storage. This value is based on the assumption that the HBA is able to receive 32-bit addresses, regardless of what the controller can actually support. If additional space is needed in the LUN or SRB extensions to handle 64-bit addresses, then appropriate adjustments must be made to this value before using it with routines such as ScsiPortGetUncachedExtension.
Dma64BitAddresses
Indicates that the HBA is able to access addresses greater than 4 GB, or 0x0FFFFFFFF if Dma64BitAddresses contains a value of SCSI_DMA64_MINIPORT_SUPPORTED. Prior to Windows 2000 the ScsiPort set this value based on the contents of HW_INITIALIZATION_DATA (SCSI). This is no longer the case. In Windows 2000 the value of Dma64BitAddresses is determined by the miniport driver callback HwScsiFindAdapter alone. If the operating system supports a 64-bit address space, the port driver passes a value of SCSI_DMA64_SYSTEM_SUPPORTED to the miniport driver in this member. If the HBA described by PORT_CONFIGURATION_INFORMATION also supports address spaces greater than 32-bits then the port/miniport driver is required to support full 64-bit addressing, and the miniport driver's callback HwScsiFindAdapter indicates this by assigning a value of SCSI_DMA64_MINIPORT_SUPPORTED to Dma64BitAddresses, writing over any previous value assigned by the port driver. The correct value must be assigned to the Dma64BitAddresses member before the miniport driver calls ScsiPortGetUncachedExtension.
ResetTargetSupported
Obsolete. ScsiPort driver no longer sends SRB_FUNCTION_RESET_DEVICE requests to its miniport drivers. Do not use this member.
MaximumNumberOfLogicalUnits
Specifies the maximum number of logical units per target the HBA can control. By default, the value of this member is SCSI_MAXIMUM_LOGICAL_UNITS. A miniport driver can reset this member to a lesser value if the HBA has more limited capabilities or to a greater value, indicating that the HBA has SCSI-3 capabilities.
WmiDataProvider
Indicates when TRUE that the miniport driver responds to Windows Management Instrumentation (WMI) requests. When FALSE the miniport driver does not respond to Windows Management Instrumentation (WMI) requests. By default, the value of this member is FALSE.
Remarks
The specific members initialized depend on the HBA miniport driver and on the configuration information available to the OS-specific port driver. The OS-specific port driver sets default values in all members for which it cannot supply configuration information to the miniport driver's HwScsiFindAdapter routine.
All HBA miniport drivers should have at least one set of defaults to use for relevant members if the OS-specific port driver does not pass in all initialized values.
The HwScsiFindAdapter routine must update all members relevant to an HBA that the driver supports.
Windows NT storage class drivers, which load later than miniport drivers, depend on the information supplied by each miniport driver's HwScsiFindAdapter routine to set up their subsequent I/O requests. For example, the MaximumTransferLength and NumberOfPhysicalBreaks values supplied by each miniport driver control whether a class driver must split large transfer requests into a set of partial transfers to suit the limits of the HBA.
The Dma64BitAddresses member of PORT_CONFIGURATION_INFORMATION should no longer be thought of as a BOOLEAN value. A value of SCSI_DMA64_SYSTEM_SUPPORTED indicates that the port/miniport driver is required to support 64-bit addressing, but the ScsiPortGetUncachedExtension routine still interprets any nonzero value of Dma64BitAddresses as indicating that 64-bit support is required. This means that ScsiPortGetUncachedExtension still functions properly when called by a legacy driver that assigns BOOLEAN values to Dma64BitAddresses.
In addition to Dma64BitAddresses, both PORT_CONFIGURATION_INFORMATION and HW_INITIALIZATION_DATA have a pair of members called SpecificLuExtensionSize and SrbExtensionSize whose values must now be handled differently. The miniport driver must calculate the initial values of SpecificLuExtensionSize and SrbExtensionSize in HW_INITIALIZATION_DATA based on the assumption that the HBA is capable of receiving 32-bit addresses, regardless of what the controller can actually support. The default values for SpecificLuExtensionSize and SrbExtensionSize in PORT_CONFIGURATION_INFORMATION will also be based on an assumption of 32-bit addressing, since the values in PORT_CONFIGURATION_INFORMATION are derived from the values in HW_INITIALIZATION_DATA.
This means that if the miniport driver needs additional space in either the LUN extension or the SRB extension in order to handle 64 bit physical addresses, it must modify the values for SpecificLuExtensionSize and SrbExtensionSize in PORT_CONFIGURATION_INFORMATION to account for this before passing PORT_CONFIGURATION_INFORMATION to ScsiPortGetUncachedExtension.
Requirements
| Requirement | Value |
|---|---|
| Header | srb.h (include Srb.h, Storport.h, Strmini.h) |