Edit

Share via

IOCTL_TAPE_GET_STATUS IOCTL (ntddtape.h)

  • Article

Returns the current status of the drive in the Status field of the I/O status block.

Major code

IRP_MJ_DEVICE_CONTROL

Input buffer

None.

Input buffer length

None.

Output buffer

None.

Output buffer length

None.

Status block

The Information field is set to zero. The Status field is set to one of the following NT status values:

  • STATUS_SUCCESS
  • STATUS_INSUFFICIENT_RESOURCES
  • STATUS_NOT_IMPLEMENTED
  • STATUS_INVALID_DEVICE_REQUEST
  • STATUS_INVALID_PARAMETER
  • STATUS_VERIFY_REQUIRED
  • STATUS_BUS_RESET
  • STATUS_SETMARK_DETECTED
  • STATUS_FILEMARK_DETECTED
  • STATUS_BEGINNING_OF_MEDIA
  • STATUS_END_OF_MEDIA
  • STATUS_BUFFER_OVERFLOW
  • STATUS_NO_DATA_DETECTED
  • STATUS_EOM_OVERFLOW
  • STATUS_NO_MEDIA
  • STATUS_IO_DEVICE_ERROR
  • STATUS_UNRECOGNIZED_MEDIA
  • STATUS_DEVICE_NOT_READY
  • STATUS_MEDIA_WRITE_PROTECTED
  • STATUS_DEVICE_DATA_ERROR
  • STATUS_NO_SUCH_DEVICE
  • STATUS_INVALID_BLOCK_LENGTH
  • STATUS_IO_TIMEOUT
  • STATUS_DEVICE_NOT_CONNECTED
  • STATUS_DATA_OVERRUN
  • STATUS_DEVICE_BUSY
  • STATUS_DEVICE_REQUIRES_CLEANING
  • STATUS_CLEANER_CARTRIDGE_INSTALLED
Each of these NT status values correspond to a value in the TAPE_STATUS enumerator. For more information about the significance of these values and a mapping between the NT status values and the TAPE_STATUS values, see Processing Tape Device Control Requests.

Requirements

Requirement Value
Header ntddtape.h (include Ntddtape.h)

See also

TAPE_STATUS