Edit

Share via

SDBUS_PROPERTY enumeration (ntddsd.h)

  • Article

The SDBUS_PROPERTY enumeration lists the properties of a Secure Digital (SD) card that an SD device driver can set with an SD request.

Syntax

typedef enum {
  SDP_MEDIA_CHANGECOUNT,
  SDP_MEDIA_STATE,
  SDP_WRITE_PROTECTED,
  SDP_FUNCTION_NUMBER,
  SDP_FUNCTION_TYPE,
  SDP_BUS_DRIVER_VERSION,
  SDP_BUS_WIDTH,
  SDP_BUS_CLOCK,
  SDP_BUS_INTERFACE_CONTROL,
  SDP_HOST_BLOCK_LENGTH,
  SDP_FUNCTION_BLOCK_LENGTH,
  SDP_FN0_BLOCK_LENGTH,
  SDP_FUNCTION_INT_ENABLE,
  SDP_SET_CARD_INTERRUPT_FORWARD,
  SDP_SET_WAKE_INTERRUPT_FORWARD,
  SDP_HIGH_CAPACITY_SUPPORTED,
  SDP_CHAINED_MDL_SUPPORTED,
  SDP_HPI_SUPPORTED
} SDBUS_PROPERTY;

Constants

 
SDP_MEDIA_CHANGECOUNT
Indicates that the operation applies to the media change count property. This property includes 4 bytes of data (ULONG) that describe SD storage functions. This property is read-only.
SDP_MEDIA_STATE
Indicates that the operation applies to the media state property. Provided for compatibility with SD storage-only host controllers. Valid only for SD storage functions. For a list of valid media states, see SDPROP_MEDIA_STATE. This property is read-only.
SDP_WRITE_PROTECTED
Indicates that the operation applies to the write-protected property and the state of the WriteProtect switch on the SD card. This property is read-only.
SDP_FUNCTION_NUMBER
Indicates that the operation applies to the function number property. This property is read-only.
SDP_FUNCTION_TYPE
v2.0 SDBUS_FUNCTION_TYPE
SDP_BUS_DRIVER_VERSION
Indicates that the operation applies to the driver version property. This property is read-only. This property is only supported in version 2.0 or later of the driver.
SDP_BUS_WIDTH
Indicates that the operation applies to the bus width property. The value of this property is either 1 or 4. This property is only supported in version 2.0 or later of the driver.
SDP_BUS_CLOCK
Indicates that the operation applies to the bus clock speed property. The value of this property is in KHz. This property is only supported in version 2.0 or later of the driver.
SDP_BUS_INTERFACE_CONTROL
Indicates that the operation applies to the SDIO bus interface control property.This property is corresponding to CCCR[7], which is defined in the Secure Digital I/O (SDIO) Card Specification. For setting bus width, SDP_BUS_WIDTH should be used to synchronize the memory function of a combination card. This property is only supported in version 2.0 or later of the driver.
SDP_HOST_BLOCK_LENGTH
Indicates that the operation applies to the host block length property, which is the maximum block length that is supported by the controller. This property is read-only. This property is only supported in version 2.0 or later of the driver.
SDP_FUNCTION_BLOCK_LENGTH
Indicates that the operation applies to the SDIO function block length property. This property is only supported in version 2.0 or later of the driver.
SDP_FN0_BLOCK_LENGTH
Indicates that the operation applies to the SDIO function zero block length property. This property is shared by all functions of the SDIO card. This property is only supported in version 2.0 or later of the driver.
SDP_FUNCTION_INT_ENABLE
Indicates that the operation applies to the SDIO function interrupt enable property. It is a Boolean-type property and only applies to the current function. This property is only supported in version 2.0 or later of the driver.
SDP_SET_CARD_INTERRUPT_FORWARD
SDP_SET_WAKE_INTERRUPT_FORWARD
SDP_HIGH_CAPACITY_SUPPORTED
SDP_CHAINED_MDL_SUPPORTED
SDP_HPI_SUPPORTED

Remarks

To read or set a property on an SD device, a device driver must do the following:

  1. Set the RequestFunction member of SDBUS_REQUEST_PACKET to an SD_REQUEST_FUNCTION enumeration value of either SDRF_GET_PROPERTY or SDRF_SET_PROPERTY.
  2. Set the Property member of SDBUS_REQUEST_PACKET to the SDBUS_PROPERTY enumeration value that specifies the property to read or change.
  3. Send the request to the bus driver by passing the initialized SDBUS_REQUEST_PACKET structure to either SdBusSubmitRequest or SdBusSubmitRequestAsync.

Requirements

Requirement Value
Header ntddsd.h (include Ntddsd.h)

See also

SDBUS_REQUEST_PACKET

SD_REQUEST_FUNCTION

SdBusSubmitRequest

SdBusSubmitRequestAsync