MIRACAST_STATUS enumeration (netdispumdddi.h)
Specifies status types that the user-mode display driver uses to report Miracast connection status.
Syntax
typedef enum {
MIRACAST_STATUS_CRITICAL_ERROR,
MIRACAST_STATUS_MISSING_KEEPALIVE,
MIRACAST_STATUS_SINK_DISOCNNECT_REQUEST,
MIRACAST_STATUS_INSUFFICIENT_BANDWIDTH,
MIRACAST_STATUS_SINK_FAILED_STANDARD_MODE_CHANGE,
MIRACAST_STATUS_COMPANION_DRIVER_DISCONNECT,
MIRACAST_STATUS_FORCE_UINT32
} MIRACAST_STATUS;
Constants
MIRACAST_STATUS_CRITICAL_ERROR An unspecified error occurred, and the Miracast connected session cannot continue. |
MIRACAST_STATUS_MISSING_KEEPALIVE The Miracast sink failed to respond to the protocol keep-alive message. |
MIRACAST_STATUS_SINK_DISOCNNECT_REQUEST The Miracast sink requested that it be disconnected. |
MIRACAST_STATUS_INSUFFICIENT_BANDWIDTH The bandwidth of the wireless connection has changed such that the current mode cannot be sustained. |
MIRACAST_STATUS_SINK_FAILED_STANDARD_MODE_CHANGE The Miracast sink failed to set a standard Video Electronics Standards Association (VESA) setting, Consumer Electronics Association (CEA) standard setting, or a hand-held mode change. |
MIRACAST_STATUS_COMPANION_DRIVER_DISCONNECT |
MIRACAST_STATUS_FORCE_UINT32 Forces this enumeration to compile to 32 bits in size. Without this value, some compilers would allow this enumeration to compile to a size other than 32 bits. You should not use this value. |
Requirements
Requirement | Value |
---|---|
Minimum supported client | Windows 8.1 |
Minimum supported server | Windows Server 2012 R2 |
Header | netdispumdddi.h (include Netdispumdddi.h) |