NdisMNetPnPEvent function (ndis.h)

NDIS miniport drivers (and intermediate drivers that are registered as miniport drivers) call the NdisMNetPnPEvent function to originate a network Plug and Play event, an NDIS PnP event, or Power Management event or propagate it to overlying drivers.

Syntax

NDIS_STATUS NdisMNetPnPEvent(
  [in] NDIS_HANDLE                 MiniportAdapterHandle,
       PNET_PNP_EVENT_NOTIFICATION NetPnPEventNotification
);

Parameters

[in] MiniportAdapterHandle

An NDIS handle which NDIS provided at the MiniportAdapterHandle parameter of the MiniportInitializeEx function. This handle identifies the miniport adapter that is affected by the event. If the caller is an intermediate driver, this is the handle of the virtual miniport.

NetPnPEventNotification

A pointer to a NET_PNP_EVENT_NOTIFICATION structure, which describes the network Plug and Play event, NDIS PnP event, or Power Management event.

Important

If the VPortId field of NetPnpEventNotification is set to a value different from NDIS_DEFAULT_VPORT_ID, then the Flags member must be set to NET_EVENT_FLAGS_VPORT_ID_VALID for VPortId to take effect.

Return value

NdisMNetPnPEvent can return the following:

Return code	Description
NDIS_STATUS_SUCCESS	The overlying drivers successfully processed the Plug and Play or Power Management event.
NDIS_STATUS_RESOURCES	The overlying drivers could not obtain the necessary system resources to satisfy the indicated Plug and Play or Power Management event.
NDIS_STATUS_INVALID_PARAMETER	NDIS failed the call because some of the input parameters are invalid.
NDIS_STATUS_NOT_SUPPORTED	NDIS 6.0 and later protocol drivers must not return this status. An NDIS 5.x protocol driver that does not support Plug and Play can return this status in response to a NetEventSetPower to indicate that NDIS should unbind it from the underlying adapter.
NDIS_STATUS_INVALID_PORT	NDIS failed the request because an invalid NDIS port was specified in a NetEventPortActivation or NetEventPortDeactivation PnP event.
NDIS_STATUS_INVALID_PORT_STATE	NDIS failed the request because an NDIS port was in an invalid port state. The ports are specified in a NetEventPortActivation or NetEventPortDeactivation PnP event.
NDIS_STATUS_FAILURE	The overlying drivers' attempts to process the propagated Plug and Play or Power Management event failed.

 

The return value is significant only when the propagated event is a NetEventQueryPower or NetEventQueryRemoveDevice event. For all other propagated events, the return value is always NDIS_STATUS_SUCCESS.

If the event is NetEventPortActivation and the call fails, the caller should not use the associated ports in receive indications or status indications.

Remarks

Any miniport driver can call NdisMNetPnPEvent to generate NetEventPortActivation and NetEventPortDeactivation events. Only intermediate drivers can make other event notifications.

Note  To prevent deadlocks, an NDIS driver must do the following:

• Its MiniportOidRequest function must not call NdisMNetPnPEvent.
• If its MiniportOidRequest function returns NDIS_STATUS_PENDING for an OID request, the NDIS driver must not call NdisMNetPnPEvent until after it has completed the OID request by calling NdisMOidRequestComplete.

 

To propagate notification of a network Plug and Play event, an NDIS PnP event, or Power Management event to overlying drivers, an NDIS intermediate driver calls NdisMNetPnPEvent in the context of the driver's ProtocolNetPnPEvent function.

If the propagated event is a NetEventQueryPower or a NetEventQueryRemoveDevice, the intermediate driver must check the NDIS_STATUS value that is returned by NdisMNetPnPEvent. If the returned status is NDIS_STATUS_SUCCESS, the intermediate driver should handle the event and then return NDIS_STATUS_SUCCESS from its ProtocolNetPnPEvent function. If the returned status is not NDIS_STATUS_SUCCESS, the intermediate driver should return the reported status from its ProtocolNetPnPEvent function without further processing.

How the intermediate driver processes a NetEventSetPower received by its ProtocolNetPnPEvent function depends on the specified device power state. If the specified device power state is NdisDeviceStateD0, the intermediate driver should handle the event and then call NdisMNetPnPEvent. For any other specified device power state, the intermediate driver should first call NdisMNetPnPEvent and then handle the event.

An intermediate driver should call NdisMNetPnPEvent to propagate a NetEventReconfigure or NetEventBindList only if the NetEventReconfigure or NetEventBindList is indicated on a non-NULL ProtocolBindingContext. If a NetEventReconfigure or NetEventBindList is indicated on a NULL ProtocolBindingContext, the intermediate driver should not call NdisMNetPnPEvent to propagate the event.

If an intermediate driver handles a NetEventReconfigure or a NetEventBindList, it should validate any data associated with the event.

An intermediate driver should not propagate the NetEventBindsComplete, NetEventPause, NetEventRestart, NetEventPortActivation, or NetEventPortDeactivation events by calling NdisMNetPnPEvent.

An NDIS intermediate driver can generate its own NDIS port events for virtual miniports as appropriate for the NetEventPortActivation or NetEventPortDeactivation events that it receives at its ProtocolNetPnPEvent function.

For all other propagated events, the intermediate driver's ProtocolNetPnPEvent function should propagate the status value that is returned by NdisMNetPnPEvent.

Requirements

Requirement	Value
Minimum supported client	Supported in NDIS 6.0 and later.
Target Platform	Universal
Header	ndis.h (include Ndis.h)
Library	Ndis.lib
IRQL	PASSIVE_LEVEL
DDI compliance rules	Irql_Protocol_Driver_Function(ndis), NdisMNetPnPEventInOIDRequest(ndis)

See also

MiniportInitializeEx

MiniportOidRequest

NET_PNP_EVENT_NOTIFICATION

ProtocolNetPnPEvent