BTP audio tests
The BTP audio tests verify the ability of the local system to pair with a remote device over BR/EDR and validate audio functionality including volume validation and audio glitch detection.
Setting Up
Before using a Pmod device with the Traduci, check that the green power indicator, an optional yellow test LED, and 3 orange LEDs on the Traduci are on. Confirm that the SUT's Bluetooth radio is powered on and that the appropriate device(s) are correctly plugged in to the Traduci. Currently the RN52 device can only be plugged into JA. More detailed information on setting up can be found at BTP overview.
Two red LEDs on the BM-64-EVB should be on. One of the LEDs may eventually turn off. Confirm the switches, jumpers, and ports are configured for testing as described in the BM-64-EVB board overview.
Features and purchasing information for supported devices can be found at Supported BTP Hardware.
Supported devices
Running the Audio Tests
Navigate to the folder where the BTP package was extracted. It's typically located under C:\BTP. In a folder named after the version of the package, you'll find the following scripts. Run either:
RunAudioTests.bat <device name>from an elevated command prompt orRunAudioTests.ps1 <device name>from an elevated PowerShell console
Information on available device name parameters can be found at Bluetooth Test Platform supported hardware
You can also include the optional parameter -VerboseLogs at the end to get a more verbose output of inner operations of BTP.
As a test starts on the Traduci, the red LED next to the 12-pin adapter turns on once the command from the test to power the Pmod device has been sent. This LED is turned off at the end of every test. If it is on at the start of the next test due to the previous test failing, power it down and power it back on to return it to a known state. If the power cycle fails, the test fails due to the Pmod device being in an unknown state.
Red and blue LEDs on the BM-64-EVB flash in patterns, indicting steps of the process such as powering on, pairing, and playing audio.
Capturing Logs
To capture the Bluetooth logs, follow the instructions for the busiotools for Windows Repo on GitHub.
To parse the Bluetooth logs, follow the instructions for the BTETLParse tool.
Known issues
BM64 EVB has the following eight known test failures:
BluetoothTests::TaefAudioTests::MusicMediaReceiverMeasuredVolumeUpTestBluetoothTests::TaefAudioTests::MusicMediaReceiverMeasuredVolumeDownTestBluetoothTests::TaefAudioTests::MusicMediaSenderMeasuredVolumeUpTestBluetoothTests::TaefAudioTests::MusicMediaSenderMeasuredVolumeDownTestBluetoothTests::TaefAudioTests::VoiceMediaReceiverMeasuredVolumeUpTestBluetoothTests::TaefAudioTests::VoiceMediaReceiverMeasuredVolumeDownTestBluetoothTests::TaefAudioTests::VoiceMediaSenderMeasuredVolumeUpTestBluetoothTests::TaefAudioTests::VoiceMediaSenderMeasuredVolumeDownTest
BTP may incorrectly identify support for the Unified Audio Endpoint feature on some Windows builds, resulting in a test failure when identifying audio endpoints.
Error: [BluetoothTestHelpers::AudioDevice::WaitForAudioSourcesState]: Assertion failed: AudioSourceDeviceVoiceSourceModule->WaitForAudioSourceState( areReady, areReady ? c_audioSinkInterfaceBringupTimeout : c_audioSinkInterfaceRemovalTimeout)Upgrading to build 22000 or later should resolve the issue.
The following mute tests fail on Windows builds 21275 and later:
BluetoothTests::TaefAudioTests::VoiceInterruptMusicMeasuredMuteTestBluetoothTests::TaefAudioTests::MeasuredMuteAndUnmuteFromMusicMediaSenderTestBluetoothTests::TaefAudioTests::MeasuredMuteAndUnmuteFromVoiceMediaSenderTest