Order (microsoft-windows-setup-diskconfiguration-disk-createpartitions-createpartition-order)

Order specifies the order in which partitions are created. This setting is required even if you create only one partition.

When modifying any number of partitions, for each drive, use the partition order starting with 1 and increasing: 1, 2, 3, and so on.

Values

partition_creation_order_number

Specifies the order in which partitions are created.

Valid Configuration Passes

windowsPE

Parent Hierarchy

microsoft-windows-setup- | DiskConfiguration | Disk | CreatePartitions | CreatePartition | Order

Applies To

For a list of the supported Windows editions and architectures that this component supports, see microsoft-windows-setup-.

XML Examples

BIOS-Based System with Two Hard Drives

The following XML output for the DiskConfiguration setting shows partition modifications for a BIOS-based computer with two hard drives. The first hard drive includes three partitions that are ordered 1, 2, and 3. The second hard drive includes a single data partition, ordered 1.

<DiskConfiguration>

  <!-- First hard drive -->
  <Disk wcm:action="add">
    <DiskID>0</DiskID> 
    <WillWipeDisk>true</WillWipeDisk> 
    <CreatePartitions>

      <!-- Recovery partition -->
      <CreatePartition wcm:action="add">
        <Order>1</Order> 
        <Type>Primary</Type> 
        <Size>3000</Size> 
      </CreatePartition>

      <!-- System partition -->
      <CreatePartition wcm:action="add">
        <Order>2</Order> 
        <Type>Primary</Type> 
        <Size>300</Size> 
      </CreatePartition>

      <!-- Windows partition -->
      <CreatePartition wcm:action="add">
        <Order>3</Order> 
        <Type>Primary</Type> 
        <Extend>true</Extend> 
      </CreatePartition>

    </CreatePartitions>
    <ModifyPartitions>

      <!-- Recovery partition -->
      <ModifyPartition wcm:action="add">
        <Order>1</Order> 
        <PartitionID>1</PartitionID> 
        <Label>Recovery</Label> 
        <Format>NTFS</Format> 
        <TypeID>0x27</TypeID>
      </ModifyPartition>

      <!-- System partition -->
      <ModifyPartition wcm:action="add">
        <Order>2</Order> 
        <PartitionID>2</PartitionID> 
        <Label>System</Label> 
        <Format>NTFS</Format> 
        <Active>true</Active> 
      </ModifyPartition>

      <!-- Windows partition -->
      <ModifyPartition wcm:action="add">
        <Order>3</Order> 
        <PartitionID>3</PartitionID> 
        <Label>Windows</Label> 
        <Letter>C</Letter> 
        <Format>NTFS</Format> 
      </ModifyPartition>
    </ModifyPartitions>
  </Disk>

  <!-- Second hard drive -->
  <Disk wcm:action="add">
    <DiskID>1</DiskID> 
    <WillWipeDisk>true</WillWipeDisk> 
    <CreatePartitions>

      <!-- Data partition -->
      <CreatePartition wcm:action="add">
        <Order>1</Order> 
        <Type>Primary</Type> 
        <Extend>true</Extend> 
      </CreatePartition>

    </CreatePartitions>
    <ModifyPartitions>

      <!-- Data partition -->
      <ModifyPartition wcm:action="add">
        <Order>1</Order> 
        <PartitionID>1</PartitionID> 
        <Label>Data</Label> 
        <Letter>D</Letter> 
        <Format>NTFS</Format> 
      </ModifyPartition>

    </ModifyPartitions>
  </Disk>

  <WillShowUI>OnError</WillShowUI> 
</DiskConfiguration>


<ImageInstall>
  <OSImage>
    <InstallTo>
      <DiskID>0</DiskID> 
      <PartitionID>3</PartitionID> 
    </InstallTo>
  </OSImage>
</ImageInstall>

UEFI-Based System with Two Hard Drives

The following XML output for the DiskConfiguration setting shows partition modifications for a Unified Extensible Firmware Interface (UEFI)-based computer with two hard drives. The first hard drive includes three partitions, ordered 1, 2, and 3. The second hard drive contains a single data partition, ordered 1.

<DiskConfiguration>

  <!-- First hard drive -->
  <Disk wcm:action="add">
    <DiskID>0</DiskID> 
    <WillWipeDisk>true</WillWipeDisk> 
    <CreatePartitions>

      <!-- EFI system partition (ESP) -->
      <CreatePartition wcm:action="add">
        <Order>1</Order> 
        <Type>EFI</Type> 
        <Size>100</Size> 
      </CreatePartition>

      <!-- Microsoft reserved partition (MSR) -->
      <CreatePartition wcm:action="add">
        <Order>2</Order> 
        <Type>MSR</Type> 
        <Size>128</Size> 
      </CreatePartition>

      <!-- Windows partition -->
      <CreatePartition wcm:action="add">
        <Order>3</Order> 
        <Type>Primary</Type> 
        <Extend>true</Extend> 
      </CreatePartition>

    </CreatePartitions>
    <ModifyPartitions>

      <!-- EFI system partition (ESP) -->
      <ModifyPartition wcm:action="add">
        <Order>1</Order> 
        <PartitionID>1</PartitionID> 
        <Label>System</Label> 
        <Format>FAT32</Format> 


      </ModifyPartition>

      <!-- MSR partition does not need to be modified -->

      <!-- Windows partition -->
      <ModifyPartition wcm:action="add">
        <Order>2</Order> 
        <PartitionID>3</PartitionID> 
        <Label>Windows</Label> 
        <Letter>C</Letter> 
        <Format>NTFS</Format> 
      </ModifyPartition>
    </ModifyPartitions>
  </Disk>

  <!-- Second hard drive -->
  <Disk wcm:action="add">
    <DiskID>1</DiskID> 
    <WillWipeDisk>true</WillWipeDisk> 
    <CreatePartitions>

      <!-- Data partition -->
      <CreatePartition wcm:action="add">
        <Order>1</Order> 
        <Type>Primary</Type> 
        <Extend>true</Extend> 
      </CreatePartition>

    </CreatePartitions>
    <ModifyPartitions>

      <!-- Data partition -->
      <ModifyPartition wcm:action="add">
        <Order>1</Order> 
        <PartitionID>1</PartitionID> 
        <Label>Data</Label> 
        <Letter>D</Letter> 
        <Format>NTFS</Format> 
      </ModifyPartition>

    </ModifyPartitions>
  </Disk>



  <WillShowUI>OnError</WillShowUI> 
</DiskConfiguration>


<ImageInstall>
  <OSImage>
    <InstallTo>
      <DiskID>0</DiskID> 
      <PartitionID>3</PartitionID> 
    </InstallTo>
  </OSImage>
</ImageInstall>

For full XML examples and recommended partition configurations, see How to Configure UEFI/GPT-Based Hard Disk Partitions or How to Configure BIOS/MBR-Based Hard Disk Partitions.

Related topics

CreatePartition