Windows Commands - CMD and PowerShell

Applies to: ✔️ Windows VMs

This section includes example commands for performing common tasks in scenarios where you may need to use SAC to access your Windows VM, such as when you need to troubleshoot RDP connection failures.

SAC has been included in all versions of Windows since Windows Server 2003 but is disabled by default. SAC relies on the sacdrv.sys kernel driver, the Special Administration Console Helper service (sacsvr), and the sacsess.exe process. For more information, see Emergency Management Services Tools and Settings.

SAC allows you to connect to your running OS via serial port. When you launch CMD from SAC, sacsess.exe launches cmd.exe within your running OS. You can see that in Task Manager if you RDP to your VM at the same time you are connected to SAC via the serial console feature. The CMD you access via SAC is the same cmd.exe you use when connected via RDP. All the same commands and tools are available, including the ability to launch PowerShell from that CMD instance. That is a major difference between SAC and the Windows Recovery Environment (WinRE) in that SAC is letting you manage your running OS, where WinRE boots into a different, minimal OS. While Azure VMs do not support the ability to access WinRE, with the serial console feature, Azure VMs can be managed via SAC.

Because SAC is limited to an 80x24 screen buffer with no scroll back, add | more to commands to display the output one page at a time. Use <spacebar> to see the next page, or <enter> to see the next line.

SHIFT+INSERT is the paste shortcut for the serial console window.

Because of SAC's limited screen buffer, longer commands may be easier to type out in a local text editor and then pasted into SAC.

View and Edit Windows Registry Settings using CMD

Verify RDP is enabled

reg query "HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server" /v fDenyTSConnections

reg query "HKLM\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services" /v fDenyTSConnections

The second key (under \Policies) will only exist if the relevant group policy setting is configured.

Enable RDP

reg add "HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server" /v fDenyTSConnections /t REG_DWORD /d 0

reg add "HKLM\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services" /v fDenyTSConnections /t REG_DWORD /d 0

The second key (under \Policies) would only be needed if the relevant group policy setting had been configured. Value will be rewritten at next group policy refresh if it is configured in group policy.

Manage Windows Services using CMD

View service state

sc query termservice

View service logon account

sc qc termservice

Set service logon account

sc config termservice obj= "NT Authority\NetworkService"

A space is required after the equals sign.

Set service start type

sc config termservice start= demand

A space is required after the equals sign. Possible start values include boot, system, auto, demand, disabled, delayed-auto.

Set service dependencies

sc config termservice depend= RPCSS

A space is required after the equals sign.

Start service

net start termservice

or

sc start termservice

Stop service

net stop termservice

or

sc stop termservice

Manage Networking Features using CMD

Show NIC properties

netsh interface show interface

Show IP properties

netsh interface ip show config

Show IPSec configuration

netsh nap client show configuration

Enable NIC

netsh interface set interface name="<interface name>" admin=enabled

Set NIC to use DHCP

netsh interface ip set address name="<interface name>" source=dhcp

For more information about netsh, click here.

Azure VMs should always be configured in the guest OS to use DHCP to obtain an IP address. The Azure static IP setting still uses DHCP to give the static IP to the VM.

Ping

ping 8.8.8.8

Port ping

Install the telnet client

dism /online /Enable-Feature /FeatureName:TelnetClient

Test connectivity

telnet bing.com 80

To remove the telnet client

dism /online /Disable-Feature /FeatureName:TelnetClient

When limited to methods available in Windows by default, PowerShell can be a better approach for testing port connectivity. See the PowerShell section below for examples.

Test DNS name resolution

nslookup bing.com

Show Windows Firewall rule

netsh advfirewall firewall show rule name="Remote Desktop - User Mode (TCP-In)"

Disable Windows Firewall

netsh advfirewall set allprofiles state off

You can use this command when troubleshooting to temporarily rule out the Windows Firewall. It will be enable on next restart or when you enable it using the command below. Do not stop the Windows Firewall service (MPSSVC) or Base Filtering Engine (BFE) service as way to rule out the Windows Firewall. Stopping MPSSVC or BFE will result in all connectivity being blocked.

Enable Windows Firewall

netsh advfirewall set allprofiles state on

Manage Users and Groups using CMD

Create local user account

net user /add <username> <password>

Add local user to local group

net localgroup Administrators <username> /add

Verify user account is enabled

net user <username> | find /i "active"

Azure VMs created from generalized image will have the local administrator account renamed to the name specified during VM provisioning. So it will usually not be Administrator.

Enable user account

net user <username> /active:yes

View user account properties

net user <username>

Example lines of interest from a local admin account:

Account active Yes

Account expires Never

Password expires Never

Workstations allowed All

Logon hours allowed All

Local Group Memberships *Administrators

View local groups

net localgroup

Manage the Windows Event Log using CMD

Query event log errors

wevtutil qe system /c:10 /f:text /q:"Event[System[Level=2]]" | more

Change /c:10 to the desired number of events to return, or move it to return all events matching the filter.

Query event log by Event ID

wevtutil qe system /c:1 /f:text /q:"Event[System[EventID=11]]" | more

Query event log by Event ID and Provider

wevtutil qe system /c:1 /f:text /q:"Event[System[Provider[@Name='Microsoft-Windows-Hyper-V-Netvsc'] and EventID=11]]" | more

Query event log by Event ID and Provider for the last 24 hours

wevtutil qe system /c:1 /f:text /q:"Event[System[Provider[@Name='Microsoft-Windows-Hyper-V-Netvsc'] and EventID=11 and TimeCreated[timediff(@SystemTime) <= 86400000]]]"

Use 604800000 to look back 7 days instead of 24 hours.

Query event log by Event ID, Provider, and EventData in the last 7 days

wevtutil qe security /c:1 /f:text /q:"Event[System[Provider[@Name='Microsoft-Windows-Security-Auditing'] and EventID=4624 and TimeCreated[timediff(@SystemTime) <= 604800000]] and EventData[Data[@Name='TargetUserName']='<username>']]" | more

View or Remove Installed Applications using CMD

List installed applications

wmic product get Name,InstallDate | sort /r | more

The sort /r sorts descending by install date to make it easy to see what was recently installed. Use <spacebar> to advance to the next page of output, or <enter> to advance one line.

Uninstall an application

wmic path win32_product where name="<name>" call uninstall

Replace <name> with the name returned in the above command for the application you want to remove.

File System Management using CMD

Get file version

wmic datafile where "drive='C:' and path='\\windows\\system32\\drivers\\' and filename like 'netvsc%'" get version /format:list

This example returns the file version of the virtual NIC driver, which is netvsc.sys, netvsc63.sys, or netvsc60.sys depending on the Windows version.

Scan for system file corruption

sfc /scannow

See also Repair a Windows Image.

Scan for system file corruption

dism /online /cleanup-image /scanhealth

See also Repair a Windows Image.

Export file permissions to text file

icacls %programdata%\Microsoft\Crypto\RSA\MachineKeys /t /c > %temp%\MachineKeys_permissions_before.txt

Save file permissions to ACL file

icacls %programdata%\Microsoft\Crypto\RSA\MachineKeys /save %temp%\MachineKeys_permissions_before.aclfile /t

Restore file permissions from ACL file

icacls %programdata%\Microsoft\Crypto\RSA /save %temp%\MachineKeys_permissions_before.aclfile /t

The path when using /restore needs to be the parent folder of the folder you specified when using /save. In this example, \RSA is the parent of the \MachineKeys folder specified in the /save example above.

Take NTFS ownership of a folder

takeown /f %programdata%\Microsoft\Crypto\RSA\MachineKeys /a /r

Grant NTFS permissions to a folder recursively

icacls C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys /t /c /grant "BUILTIN\Administrators:(F)"

Manage Devices

Remove non-present PNP devices

%windir%\System32\RUNDLL32.exe %windir%\System32\pnpclean.dll,RunDLL_PnpClean /Devices /Maxclean

Manage Group Policy

Force group policy update

gpupdate /force /wait:-1

Miscellaneous Tasks using CMD

Show OS version

ver

or

wmic os get caption,version,buildnumber /format:list

or

systeminfo find /i "os name"

systeminfo | findstr /i /r "os.*version.*build"

View OS install date

systeminfo | find /i "original"

or

wmic os get installdate

View last boot time

systeminfo | find /i "system boot time"

View time zone

systeminfo | find /i "time zone"

or

wmic timezone get caption,standardname /format:list

Restart Windows

shutdown /r /t 0

Adding /f will force running applications to close without warning users.

Detect Safe Mode boot

bcdedit /enum | find /i "safeboot"

Windows Commands - PowerShell

To run PowerShell in SAC, after you reach a CMD prompt, type:

powershell <enter>

Caution

Remove the PSReadLine module from the PowerShell session before running any other PowerShell commands. There is a known issue where extra characters may be introduced in text pasted from the clipboard if PSReadLine is running in a PowerShell session in SAC.

First check if PSReadLine is loaded. It is loaded by default on Windows Server 2016, Windows 10, and later versions of Windows. It would only be present on earlier Windows versions if it had been manually installed.

If this command returns to a prompt with no output, then the module was not loaded and you can continue using the PowerShell session in SAC as normal.

get-module psreadline

If the above command returns the PSReadLine module version, run the following command to unload it. This command does not delete or uninstall the module, it only unloads it from the current PowerShell session.

remove-module psreadline

View and Edit Windows Registry Settings using PowerShell

Verify RDP is enabled

get-itemproperty -path 'hklm:\system\curRentcontrolset\control\terminal server' -name 'fdenytsconNections'

get-itemproperty -path 'hklm:\software\policies\microsoft\windows nt\terminal services' -name 'fdenytsconNections'

The second key (under \Policies) will only exist if the relevant group policy setting is configured.

Enable RDP

set-itemproperty -path 'hklm:\system\curRentcontrolset\control\terminal server' -name 'fdenytsconNections' 0 -type dword

set-itemproperty -path 'hklm:\software\policies\microsoft\windows nt\terminal services' -name 'fdenytsconNections' 0 -type dword

The second key (under \Policies) would only be needed if the relevant group policy setting had been configured. Value will be rewritten at next group policy refresh if it is configured in group policy.

Manage Windows Services using PowerShell

View service details

get-wmiobject win32_service -filter "name='termservice'" | format-list Name,DisplayName,State,StartMode,StartName,PathName,ServiceType,Status,ExitCode,ServiceSpecificExitCode,ProcessId

Get-Service can be used but doesn't include the service logon account. Get-WmiObject win32-service does.

Set service logon account

(get-wmiobject win32_service -filter "name='termservice'").Change($null,$null,$null,$null,$null,$false,'NT Authority\NetworkService')

When using a service account other than NT AUTHORITY\LocalService, NT AUTHORITY\NetworkService, or LocalSystem, specify the account password as the last (eighth) argument after the account name.

Set service startup type

set-service termservice -startuptype Manual

Set-service accepts Automatic, Manual, or Disabled for startup type.

Set service dependencies

Set-ItemProperty -Path 'HKLM:\SYSTEM\CurrentControlSet\Services\TermService' -Name DependOnService -Value @('RPCSS','TermDD')

Start service

start-service termservice

Stop service

stop-service termservice

Manage Networking Features using PowerShell

Show NIC properties

get-netadapter | where {$_.ifdesc.startswith('Microsoft Hyper-V Network Adapter')} | format-list status,name,ifdesc,macadDresS,driverversion,MediaConNectState,MediaDuplexState

or

get-wmiobject win32_networkadapter -filter "servicename='netvsc'" | format-list netenabled,name,macaddress

Get-NetAdapter is available in 2012+, for 2008R2 use Get-WmiObject.

Show IP properties

get-wmiobject Win32_NetworkAdapterConfiguration -filter "ServiceName='netvsc'" | format-list DNSHostName,IPAddress,DHCPEnabled,IPSubnet,DefaultIPGateway,MACAddress,DHCPServer,DNSServerSearchOrder

Enable NIC

get-netadapter | where {$_.ifdesc.startswith('Microsoft Hyper-V Network Adapter')} | enable-netadapter

or

(get-wmiobject win32_networkadapter -filter "servicename='netvsc'").enable()

Get-NetAdapter is available in 2012+, for 2008R2 use Get-WmiObject.

Set NIC to use DHCP

get-netadapter | where {$_.ifdesc.startswith('Microsoft Hyper-V Network Adapter')} | Set-NetIPInterface -DHCP Enabled

(get-wmiobject Win32_NetworkAdapterConfiguration -filter "ServiceName='netvsc'").EnableDHCP()

Get-NetAdapter is available on 2012+. For 2008R2 use Get-WmiObject. Azure VMs should always be configured in the guest OS to use DHCP to obtain an IP address. The Azure static IP setting still uses DHCP to give the IP to the VM.

Ping

test-netconnection

Note

The Write-Progress cmdlet may not work with this command. As a mitigation, you can run $ProgressPreference = "SilentlyContinue" in PowerShell to disable the progress bar.

or

get-wmiobject Win32_PingStatus -Filter 'Address="8.8.8.8"' | format-table -autosize IPV4Address,ReplySize,ResponseTime

Test-Netconnection without any parameters will try to ping internetbeacon.msedge.net. It is available on 2012+. For 2008R2 use Get-WmiObject as in the second example.

Port Ping

test-netconnection -ComputerName bing.com -Port 80

or

(new-object Net.Sockets.TcpClient).BeginConnect('bing.com','80',$null,$null).AsyncWaitHandle.WaitOne(300)

Test-NetConnection is available on 2012+. For 2008R2 use Net.Sockets.TcpClient

Test DNS name resolution

resolve-dnsname bing.com

or

[System.Net.Dns]::GetHostAddresses('bing.com')

Resolve-DnsName is available on 2012+. For 2008R2 use System.Net.DNS.

Show Windows firewall rule by name

get-netfirewallrule -name RemoteDesktop-UserMode-In-TCP

Show Windows firewall rule by port

get-netfirewallportfilter | where {$_.localport -eq 3389} | foreach {Get-NetFirewallRule -Name $_.InstanceId} | format-list Name,Enabled,Profile,Direction,Action

or

(new-object -ComObject hnetcfg.fwpolicy2).rules | where {$_.localports -eq 3389 -and $_.direction -eq 1} | format-table Name,Enabled

Get-NetFirewallPortFilter is available on 2012+. For 2008R2 use the hnetcfg.fwpolicy2 COM object.

Disable Windows firewall

Set-NetFirewallProfile -Profile Domain,Public,Private -Enabled False

Set-NetFirewallProfile is available on 2012+. For 2008R2 use netsh advfirewall as referenced in the CMD section above.

Manage Users and Groups using PowerShell

Create local user account

new-localuser <name>

Verify user account is enabled

(get-localuser | where {$_.SID -like "S-1-5-21-*-500"}).Enabled

or

(get-wmiobject Win32_UserAccount -Namespace "root\cimv2" -Filter "SID like 'S-1-5-%-500'").Disabled

Get-LocalUser is available on 2012+. For 2008R2 use Get-WmiObject. This example shows the built-in local administrator account, which always has SID S-1-5-21-*-500. Azure VMs created from generalized image will have the local administrator account renamed to the name specified during VM provisioning. So it will usually not be Administrator.

Add local user to local group

add-localgroupmember -group Administrators -member <username>

Enable local user account

get-localuser | where {$_.SID -like "S-1-5-21-*-500"} | enable-localuser

This example enables the built-in local administrator account, which always has SID S-1-5-21-*-500. Azure VMs created from generalized image will have the local administrator account renamed to the name specified during VM provisioning. So it will usually not be Administrator.

View user account properties

get-localuser | where {$_.SID -like "S-1-5-21-*-500"} | format-list *

or

get-wmiobject Win32_UserAccount -Namespace "root\cimv2" -Filter "SID like 'S-1-5-%-500'" | format-list Name,Disabled,Status,Lockout,Description,SID

Get-LocalUser is available on 2012+. For 2008R2 use Get-WmiObject. This example shows the built-in local administrator account, which always has SID S-1-5-21-*-500.

View local groups

(get-localgroup).name | sort (get-wmiobject win32_group).Name | sort

Get-LocalUser is available on 2012+. For 2008R2 use Get-WmiObject.

Manage the Windows Event Log using PowerShell

Query event log errors

get-winevent -logname system -maxevents 1 -filterxpath "*[System[Level=2]]" | more

Change /c:10 to the desired number of events to return, or move it to return all events matching the filter.

Query event log by Event ID

get-winevent -logname system -maxevents 1 -filterxpath "*[System[EventID=11]]" | more

Query event log by Event ID and Provider

get-winevent -logname system -maxevents 1 -filterxpath "*[System[Provider[@Name='Microsoft-Windows-Hyper-V-Netvsc'] and EventID=11]]" | more

Query event log by Event ID and Provider for the last 24 hours

get-winevent -logname system -maxevents 1 -filterxpath "*[System[Provider[@Name='Microsoft-Windows-Hyper-V-Netvsc'] and EventID=11 and TimeCreated[timediff(@SystemTime) <= 86400000]]]"

Use 604800000 to look back 7 days instead of 24 hours. |

Query event log by Event ID, Provider, and EventData in the last 7 days

get-winevent -logname system -maxevents 1 -filterxpath "*[System[Provider[@Name='Microsoft-Windows-Security-Auditing'] and EventID=4624 and TimeCreated[timediff(@SystemTime) <= 604800000]] and EventData[Data[@Name='TargetUserName']='<username>']]" | more

View or Remove Installed Applications using PowerShell

List installed software

get-wmiobject win32_product | select installdate,name | sort installdate -descending | more

Uninstall software

(get-wmiobject win32_product -filter "Name='<name>'").Uninstall()

File System Management using PowerShell

Get file version

(get-childitem $env:windir\system32\drivers\netvsc*.sys).VersionInfo.FileVersion

This example returns the file version of the virtual NIC driver, which is named netvsc.sys, netvsc63.sys, or netvsc60.sys depending on the Windows version.

Download and extract file

$path='c:\bin';md $path;cd $path;(new-object net.webclient).downloadfile( ('htTp:/'+'/download.sysinternals.com/files/SysinternalsSuite.zip'),"$path\SysinternalsSuite.zip");(new-object -com shelL.apPlication).namespace($path).CopyHere( (new-object -com shelL.apPlication).namespace("$path\SysinternalsSuite.zip").Items(),16)

This example creates a c:\bin folder, then downloads and extracts the Sysinternals suite of tools into c:\bin.

Miscellaneous Tasks using PowerShell

Show OS version

get-wmiobject win32_operatingsystem | format-list caption,version,buildnumber

View OS install date

(get-wmiobject win32_operatingsystem).converttodatetime((get-wmiobject win32_operatingsystem).installdate)

View last boot time

(get-wmiobject win32_operatingsystem).lastbootuptime

View Windows uptime

"{0:dd}:{0:hh}:{0:mm}:{0:ss}.{0:ff}" -f ((get-date)-(get-wmiobject win32_operatingsystem).converttodatetime((get-wmiobject win32_operatingsystem).lastbootuptime))

Returns uptime as <days>:<hours>:<minutes>:<seconds>:<milliseconds>, for example 49:16:48:00.00.

Restart Windows

restart-computer

Adding -force will force running applications to close without warning users.

Instance Metadata

You can query Azure instance metadata from within your Azure VM to view details such as osType, Location, vmSize, vmId, name, resourceGroupName, subscriptionId, privateIpAddress, and publicIpAddress.

Querying instance metadata requires healthy guest network connectivity, because it makes a REST call through the Azure host to the instance metadata service. So if you are able to query instance metadata, that tells you the guest is able to communicate over the network to an Azure-hosted service.

For more information, see Azure Instance Metadata service.

Instance metadata

$im = invoke-restmethod -headers @{"metadata"="true"} -uri http://169.254.169.254/metadata/instance?api-version=2017-08-01 -method get

$im | convertto-json

OS Type (Instance Metadata)

$im.Compute.osType

Location (Instance Metadata)

$im.Compute.Location

Size (Instance Metadata)

$im.Compute.vmSize

VM ID (Instance Metadata)

$im.Compute.vmId

VM Name (Instance Metadata)

$im.Compute.name

Resource Group Name (Instance Metadata)

$im.Compute.resourceGroupName

Subscription ID (Instance Metadata)

$im.Compute.subscriptionId

Tags (Instance Metadata)

$im.Compute.tags

Placement Group ID (Instance Metadata)

$im.Compute.placementGroupId

Platform Fault Domain (Instance Metadata)

$im.Compute.platformFaultDomain

Platform Update Domain (Instance Metadata)

$im.Compute.platformUpdateDomain

IPv4 Private IP Address (Instance Metadata)

$im.network.interface.ipv4.ipAddress.privateIpAddress

IPv4 Public IP Address (Instance Metadata)

$im.network.interface.ipv4.ipAddress.publicIpAddress

IPv4 Subnet Address / Prefix (Instance Metadata)

$im.network.interface.ipv4.subnet.address

$im.network.interface.ipv4.subnet.prefix

IPv6 IP Address (Instance Metadata)

$im.network.interface.ipv6.ipAddress

MAC Address (Instance Metadata)

$im.network.interface.macAddress

Next steps

• The main serial console Windows documentation page is located here.
• The serial console is also available for Linux VMs.
• Learn more about boot diagnostics.

Contact us for help

If you have questions or need help, create a support request, or ask Azure community support. You can also submit product feedback to Azure feedback community.