Share via


Connect to the Internet by using Frame Relay

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

To connect to the Internet by using Frame Relay

  1. Install the Frame Relay adapter in your computer.

  2. On your desktop, right-click My Computer, click Properties, and on the Hardware tab, click Add Hardware Wizard. Follow the prompts to configure the Frame Relay adapter.

  3. After the Frame Relay adapter is added and the server restarted, verify that the Frame Relay adapter appears as a routing interface under Network Interfaces in Routing and Remote Access.

  4. Add a default network route that uses the Frame Relay adapter.

Note

  • A default network route has a Destination of 0.0.0.0, Network mask of 0.0.0.0, and Metric of 1. Because the Frame Relay connection to the ISP is a point-to-point link, the Gateway IP address is not configurable.

Information about functional differences

  • Your server might function differently based on the version and edition of the operating system that is installed, your account permissions, and your menu settings. For more information, see Viewing Help on the Web.

See Also

Concepts

Working with MMC console files
Internet Connection Sharing and network address translation
Routed Connection to the Internet
Add a default static IP route