Share via


ATM_BHLI_IE structure

Note   NDIS 5. x has been deprecated and is superseded by NDIS 6. x. For new NDIS driver development, see Network Drivers Starting with Windows Vista. For information about porting NDIS 5. x drivers to NDIS 6. x, see Porting NDIS 5.x Drivers to NDIS 6.0.

The ATM_BHLI_IE structure specifies broadband high-layer information, which indicates the means that should be used for compatibility checking by an addressed entity (for example, a remote user, an interworking unit, or a high-layer function network node addressed by the calling user).

Syntax

typedef struct _ATM_BHLI_IE {
  ULONG HighLayerInfoType;
  ULONG HighLayerInfoLength;
  UCHAR HighLayerInfo[8];
} ATM_BHLI_IE, *PATM_BHLI_IE;

Members

  • HighLayerInfoType
    Specifies the High Layer Information Type as one of the following values:

    • BHLI_ISO
      ISO

    • BHLI_UserSpecific
      User Specific

    • BHLI_HighLayerProfile
      High Layer Profile (only in UNI3.0)

    • BHLI_VendorSpecificAppId
      Vendor Specific Application identifier

  • HighLayerInfoLength
    Specifies the size in bytes of the buffer at HighLayerInfo.

  • HighLayerInfo
    Specifies the High Layer Information. The contents depend on the specified High Layer Information Type.

Remarks

ATM_BHLI_IE is a member of an ATM_PVC_SAP structure or an ATM_SAP structure. ATM_PVC_SAP specifies ATM-specific SAP information for a PVC. ATM_SAP specifies ATM-specific SAP information for a switched (SVC).

ATM_BHLI_IE is also used to specify the broadband low layer information element of an ATM UNI signaling message.

For information about the broadband high layer information, see the User Network Interface (UNI) Specification published by the ATM Forum.

Requirements

Header

Atm.h (include Atm.h)

See also

ATM_BLLI_IE

ATM_PVC_SAP

ATM_SAP

Q2931_IE

Q2931_CALLMGR_PARAMETERS

 

 

Send comments about this topic to Microsoft