Compact Database Extended Performance Test (Compact 2013)
3/26/2014
The CEDB Extended Performance tests analyze the performance of the system when performing common database operations such as writing a record, a seeking database, and deleting a record. They capture information about CPU utilization and memory data, as well as the time it takes to complete each operation.
* "Perf_dbEx_Long": This is the extended version of the Perf_dbEx.dll benchmark suite. It contains a larger amount of benchmark operations and data.
Please see the documentation for details about the Perf_dbEx.dll database performance tests.
You may want to run this test to compare CEDB extended performance on storage devices from different manufacturers. You may also want to run this test to decide whether to store the database on a flash card or a hard disk.
The CEDB Extended Performance test generates raw benchmark data into a log file in the release directory. The log file name is in the following format:
"perf_dbEx_long_[Target HW]_[Platform]_[OS Version].LOG".
For more details about the content of the raw log, see PerfLog Output File Contents.
You can write your own parser to convert the raw data, or use the PerfToCsv Tool, the default parser provided by Microsoft. For more information about the default parser, see Managing Performance Results Using PerfLog.
Test Prerequisites
Your device must meet the following requirements before you run this test.
There are no other hardware requirements for the CEDB Extended Performance tests.
The following table shows the software requirements for the CEDB Extended Performance tests.
Requirement |
Description |
|---|---|
Tux.exe |
Tux Test Harness, required for executing the test. |
Kato.dll |
Kato logging engine, required for logging test data. |
Perflog.dll |
Performance logging engine, required for capturing the benchmark data. |
Perf_dbEx_long.dll |
Test library |
NoteThere must be at least 10 megabytes (MB) of free space in the root directory of the device. If there is not sufficient space in the root directory of the target device, the test cannot run properly. An alternate option is to run the test suite on a storage media such as a storage card or hard disk.
Subtests
The table below lists the subtests included in this test.
SubTest ID |
Description |
|---|---|
1001 |
Measures the database performance by using the default sorting mechanism. |
1002 |
Measures the database performance by using the DWORD sorting mechanism. |
1003 |
Measures the database performance by using the String sorting mechanism. |
1004 |
Measures the database performance by using the Filetime sorting mechanism |
1005 |
Measures the database performance on flushing. |
Setting Up the Test
This test has no additional requirements, beyond the standard test environment setup.
Running the Test
The CEDB Extended Performance test executes the command line of tux -o -d perf_dbEx_long on default execution.
The following table shows the optional command line parameters for the CEDB Extended Performance Tests.
Command line parameter |
Description |
|---|---|
/path root_path |
Specifies the database volume root path. |
/dbvol db_volume_filename |
Specifies the database volume name. |
/db db_name |
Specifies the database name. |
/sleep |
Allows the test suite to pause between each operation. |
/interval time |
Specifies the interval (in milliseconds) between each CPU/memory snapshot. The default value is 100 ms. |
/calibration time |
Specifies the CPU calibration duration (in milliseconds). The default value is 100 ms. |
Example:
tux -o -d perf_dbEx_long -c "/path \Hard Disk /dbvol testVol /db testDB"
The above command will create the database "testDB" inside the database volume file "testVol", on the root path of "\Hard Disk".
Verifying the Test
When the test completes running, verify that "PASS" appears in the test log for all subtests.
Troubleshooting the Test
The following table shows troubleshooting tips for error messages you may encounter when running the CEDB Extended Performance tests.
Error message |
Solution |
|---|---|
Skipping trim of volume \Perf_DBEx_Vol. |
This is an informational message, not an error. |
DB:Out of disk space |
This is an indication that the system is running out of space. You may want to run the test on a larger storage media. For more information on how to specify the database volume file path, see Command Line Parameters for the CEDB Extended Performance Tests |