Command Line Parameters for the One-Card Network Card Miniport Driver Test (Windows Embedded CE 6.0)
1/6/2010
The One-Card Network Card Miniport Driver Test executes the tux –o –d ndt_1c command line on default execution. You can modify the test by further editing the command line. For information about how to edit the command line for a test, see Editing the Command-Line for a Test. The following table shows the command line parameters for the One-Card Network Card Miniport Driver Test.
| Command line parameter | Description |
|---|---|
-packets |
Logs information when a test confirms that a packet has been sent or received. |
-nounbind |
Disables unbinding of other protocol drivers from the test adapter before the test is run. |
-fault |
Includes test case 8, which is skipped by default. Only ISA and PCI network cards support test case 8. |
-cancel |
Instructs test case 7 to fail when no packets are canceled. By default, test case 7 does not fail when no packets are canceled. |
For information about configuring the target device and development workstation to run the test, see Running the One-Card Network Card Miniport Driver Test.