Prerequisites for the Bluetooth HCI Transport Driver Test (Windows Embedded CE 6.0)
1/6/2010
The following table shows the hardware requirements for the Bluetooth HCI Transport Driver Test.
| Requirement | Description |
|---|---|
A Windows Embedded CE-based device with a Bluetooth device attached, configured as the primary (or Master) device. |
The primary device always creates a connection to the secondary device. |
A Windows Embedded CE-based device with a Bluetooth device attached, configured as a secondary (or subordinate) device. |
The secondary device always accepts a connection from the primary device. |
Note
This test is designed to run between a Peregrine/SmartFon and a Windows Embedded CE-based device. The Peregrine/SmartFon is always the primary device and theWindows Embedded CE-based device is always the subordinate device.
The following table shows the software requirements for the Windows Embedded CE–based device or Windows–based desktop computer that is the client for the Bluetooth Performance Test. These files are found at Platform_Builder_installation_path\Cepb\Wcetk\Ddtk\CPU.
| Requirement | Description |
|---|---|
Tux.exe |
Tux test harness, required for executing the test |
Kato.dll |
Kato logging engine, required for logging test data |
Ddlx.dll |
Handles the device driver under test |
Hciqa_con.dll |
Provides test functionality |