Share via


Prerequisites for the IR Port Test (Winsock 2.0) (Windows Embedded CE 6.0)

1/6/2010

The following table shows the hardware requirement for the IR Port Test (Winsock 2.0).

Requirement Description

Two installed IR devices

You must install one IR device on a test server and another IR device on a test client. You should position the IR devices in close proximity to one another. You should point each IR device directly at the other IR device.

You can run the IR Port Test (Winsock 2.0) using either IR or a TCP/IP network as a control channel. If you use a TCP/IP network, the client and server must be on the TCP/IP network and must be able to communicate with each other.

Note

You can run the IR Port Test (Winsock 2.0) without a server.

The following table shows the software requirements for the IR Port Test (Winsock 2.0).

Requirements Description

Tux.exe

Tux test harness, required for executing the test

Kato.dll

Kato logging engine, required for logging test data

Irapi22.dll

Library containing test cases

The following table shows the software requirements for running the IR Port Test (Winsock 2.0) on the test server.

Requirements Description

Kato.dll

Kato logging engine, required for logging test data

Irapisrv22.exe

Library containing test cases

To run the IR Port Test (Winsock 2.0), before you build your run-time image, you must include the Winsock 2.0 and IR catalog items in your OS design.

See Also

Concepts

IR Port Test (Winsock 2.0)