Share via


UNIMDM_CHG_DEVCFG (Windows Embedded CE 6.0)

1/6/2010

This structure provides an interface to programmatically edit or retrieve the Unimodem device configuration.

Syntax

typedef struct _UNIMDM_CHG_DEVCFG {
  DWORD dwCommand; 
  LPCWSTR lpszDeviceClass; 
  LPVARSTRING lpDeviceConfig; 
  DWORD dwOption; 
  DWORD dwValue; 
} UNIMDM_CHG_DEVCFG; 

Members

  • dwCommand
    Value that controls whether the device configuration is retrieved or edited. The following table shows possible values for dwCommand.

    Value Description

    UNIMDM_CMD_CHG_DEVCFG

    Command to edit the device configuration.

    UNIMDM_CMD_GET_DEVCFG

    Command to retrieve the device configuration.

  • lpszDeviceClass
    Pointer to a null-terminated string that identifies a device class name.
  • lpDeviceConfig
    Pointer to the device configuration to be retrieved or edited.
  • dwOption
    Value that selects the option to be retrieved or changed in the device configuration. The following table shows possible values for dwOption.

    Value Description

    UNIMDM_OPT_BAUDRATE

    The baud rate at which the Unimodem operates. Valid values are the CBR_* values that are defined in Winbase.h.

    UNIMDM_OPT_BYTESIZE

    The size of the UNIMDM_CHG_DEVCFG structure in bytes.

    UNIMDM_OPT_PARITY

    The valid values are defined in Winbase.h.

    UNIMDM_OPT_STOPBITS

    The valid values are defined in Winbase.h.

    UNIMDM_OPT_WAITBONG

    The number of seconds to wait for a prompt tone.

    UNIMDM_OPT_MDMOPTIONS

    Selects the Unimodem option to be retrieved or changed. Valid values are the MDM_* values defined in Mcx.h. Currently, the supported options are MDM_BLIND_DIAL, MDM_FLOWCONTROL_HARD, MDM_FLOWCONTROL_SOFT, and MDM_SPEED_ADJUST. MDM_SPEED_ADJUST enables automatic baud rate detection on a DCC client connection.

    UNIMDM_OPT_TIMEOUT

    The number of seconds before a call time-out failure.

    UNIMDM_OPT_TERMOPTIONS

    The terminal dialing options. Valid values are defined in Netui.h.

    UNIMDM_OPT_DIALMOD

    The dial modifier. The dwValue parameter must be type LPCWSTR.

  • dwValue
    If dwCommandis UNIMDM_CMD_CHG_DEVCFG, this member should contain the new option value. If dwCommandis UNIMDM_CMD_GET_DEVCFG, this member will receive the current option value.

Remarks

Changes are applied to the DevConfig structure only and do not affect the current state of the associated line device.

The following code example demonstrates how to use this structure.

PUNIMDM_CHG_DEVCFG pUniMdmChgDevCfg;
// allocate and set up pUniMdmChgDevCfg fields 
pUniMdmChgDevCfg->dwCommand = UNIMDM_CMD_CHG_DEVCFG;
rc = lineDevSpecific(
          hLine,
          0,
          NULL,
          pUniMdmChgDevCfg,
          sizeof(UNIMDM_CHG_DEVCFG));

Requirements

Header unimodem.h
Windows Embedded CE Windows CE .NET 4.0 and later

See Also

Reference

TAPI Structures
UNIMODEM_INFO