Windows Embedded CE Boot Loader Output for the HP Compaq t5530 Thin Client Development Platform (Windows Embedded CE 6.0)
1/5/2010
The following example shows typical output from the Windows Embedded CE boot loader:
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Jun 12 2007 14:06:11
Microsoft Windows CE Ethernet Bootloader 3.7 for CE/PC (Jun 12 2007)
Boot Args @ 0x1FC46 and ucLoaderFlags is 1
FlashInit
FMD_Init
-FlashInit:Fails!!!!
PCI Device Configurations (2 PCI bus(es) present)...
====================================================
Bus, Device, Function = 0, 15, 0
Vendor ID, Device ID = 0x1106, 0x0571
Base Class, Subclass = 1, 1 => MASS_STORAGE_CTLR
Interrupt = 255
BaseAddress[4] = 0xFF00 (I/O)
====================================================
Bus, Device, Function = 0, 16, 0
Vendor ID, Device ID = 0x1106, 0x3038
Base Class, Subclass = 12, 3 => SERIAL_BUS_CTLR
Interrupt = 11
BaseAddress[4] = 0xFE00 (I/O)
====================================================
Bus, Device, Function = 0, 16, 1
Vendor ID, Device ID = 0x1106, 0x3038
Base Class, Subclass = 12, 3 => SERIAL_BUS_CTLR
Interrupt = 11
BaseAddress[4] = 0xFD00 (I/O)
====================================================
Bus, Device, Function = 0, 16, 2
Vendor ID, Device ID = 0x1106, 0x3038
Base Class, Subclass = 12, 3 => SERIAL_BUS_CTLR
Interrupt = 5
BaseAddress[4] = 0xFC00 (I/O)
====================================================
Bus, Device, Function = 0, 16, 3
Vendor ID, Device ID = 0x1106, 0x3038
Base Class, Subclass = 12, 3 => SERIAL_BUS_CTLR
Interrupt = 5
BaseAddress[4] = 0xFB00 (I/O)
====================================================
Bus, Device, Function = 0, 16, 4
Vendor ID, Device ID = 0x1106, 0x3104
Base Class, Subclass = 12, 3 => SERIAL_BUS_CTLR
Interrupt = 10
BaseAddress[0] = 0xFDFFF000 (Memory)
====================================================
Bus, Device, Function = 0, 18, 0
Vendor ID, Device ID = 0x1106, 0x3065
Base Class, Subclass = 2, 0 => NETWORK_CTLR
Interrupt = 11
BaseAddress[0] = 0xF400 (I/O)
BaseAddress[1] = 0xFDFFE000 (Memory)
====================================================
Bus, Device, Function = 1, 0, 0
Vendor ID, Device ID = 0x1106, 0x3344
Base Class, Subclass = 3, 0 => DISPLAY_CTLR
Interrupt = 11
BaseAddress[0] = 0xF4000000 (Memory)
BaseAddress[1] = 0xFB000000 (Memory)
====================================================
InitKitlNIC: Searching for PCI Ethernet NIC (dwIrq = 0, dwIoBase = 0, dwDfltType = 1) ...
InitKitlNIC: Found PCI Ethernet NIC (type = 41, IRQ=11, IOBase=0xF400).
WINCE FET ETHDBG driver: ver. 1.03
FETInitDMABuffer():: Start[0x200000]-[0x200000] - Size[0x20000]
Tx[0x200000] - Rx[0x206000]
FETInit():: BaseIO[0xF400] : MemOffset[0x1]
FETHWSetMCRegs():: Set all to 0x00
FETInit():: MAC = 00-00-00-00-00-00
FETInit():: Link [1]
FETInit():: Full-Duplex Mode
+---------- Initialize ----------+
RCR = [0xE8] TCR = [0xE8]
CR0 = [0x1A] CR1 = [0xC]
ISR0 = [0x0] IMR0 = [0x0]
RX_ADDR = 0x[20C000] TX_ADDR = 0x[20C100]
RDSE = 0x[400] 0x[0] 0x[0] 0x[0]
TDSE = 0x[0] 0x[0] 0x[0] 0x[0]
RX_DESC = [0] TX_DESC = [0]
+------------------------------------------------------------+
Returned MAC Address:00:00:00:00:00:00
System ready!
Preparing for download...
OEMPreDownload ucLoaderFlags is 0
x86KitlCreateName: Using Device Name 'BKNIxxxx'
Using device name: BKNIxxxx
Hit ENTER within 3 seconds to enter static IP address!InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 0.0.0.0
ProcessDHCP()::DHCP IP Address Resolved as 0.0.0.0, netmask: 255.255.252.0
Lease time: 7200 seconds
Got Response from DHCP server, IP address: 0.0.0.0
No ARP response in 2 seconds, assuming ownership of 0.0.0.0
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
See Also
Tasks
How to Use the BSP for the HP Compaq t5530 Thin Client Development Platform