Share via

Connecting the Voice Over IP PXA270 Development Platform (Windows Embedded CE 6.0)

  • Article

1/5/2010

The following steps show you how to connect the Voice over IP PXA270 development platform to a development workstation. Make sure that you have a USB cable available to make the connection.

To set up the Voice over IP PXA270 development platform hardware

  1. Connect a USB cable from the development workstation to the USB port on the Voice over IP PXA270 development platform.

  2. Make sure that you have installed the device driver from the %_WINCEROOT%\Platform\Voip_pxa270\tools directory. This is required for Platform Builder to communicate with the device.

See Also

Tasks

How to Use the BSP for the Voice over IP PXA270 Development Platform