Article
10/01/2010

Expression Examples (Report Builder 2.0)

Expressions are used frequently in reports to control content and report appearance. Expressions are written in Microsoft Visual Basic, and can use built-in functions, custom code, global variables, and user-defined variables. For more information about the expression editor and the types of references that you can include, see Using Expressions (Report Builder 2.0), and How to: Add an Expression (Report Builder 2.0).

This topic provides examples of expressions that can be used for common tasks in a report.

Visual Basic Functions Examples for date, string, conversion and conditional Visual Basic functions.
Report Functions Examples for aggregates and other built-in report functions.
Appearance of Report Data Examples for changing the appearance of a report.
Properties Examples for setting report item properties to control format or visibility.
Parameters Examples for using parameters in an expression.
Custom Code Examples of embedded custom code.

Functions

Many expressions in a report contain functions. You can format data, apply logic, and access report metadata using these functions. You can write expressions that use functions from the Microsoft Visual Basic run-time library, and from the System.Convert and System.Math namespaces. You can add references to functions from other assemblies or custom code. You can also use classes from the Microsoft .NET Framework, including System.Text.RegularExpressions. For more information about Visual Basic functions, see "Visual Basic Run-Time Library" at msdn.microsoft.com.

Visual Basic Functions

You can use Visual Basic functions to manipulate the data that is displayed in text boxes or that is used for parameters, properties, or other areas of the report. This section provides examples demonstrating some of these functions. For more information about Visual Basic functions, see the Visual Basic documentation.

Date Functions

The Today function provides the current date. This expression can be used in a text box to display the date on the report, or in a parameter to filter data based on the current date.
```
=Today()
```
The DateAdd function is useful for supplying a range of dates based on a single parameter. The following expression provides a date that is six months after the date from a parameter named StartDate.
```
=DateAdd(DateInterval.Month, 6, Parameters!StartDate.Value)
```
The Year function displays the year for a particular date. You can use this to group dates together or to display the year as a label for a set of dates. This expression provides the year for a given group of sales order dates. The Month function and other functions can also be used to manipulate dates. For more information, see the Visual Basic documentation.
```
=Year(Fields!OrderDate.Value)
```

String Functions

Combine more than one field by using concatenation operators and Visual Basic constants. The following expression returns two fields, each on a separate line in the same text box:
```
=Fields!FirstName.Value & vbCrLf & Fields!LastName.Value 
```
Format dates and numbers in a string with the Format function. The following expression displays values of the StartDate and EndDate parameters in long date format:
```
=Format(Parameters!StartDate.Value, "D") & " through " &  Format(Parameters!EndDate.Value, "D")  
```
If the text box contains only a date or number, you should use the Format property of the text box to apply formatting instead of the Format function within the text box.
The Right, Len, and InStr functions are useful for returning a substring, for example, trimming DOMAIN\username to just the user name. The following expression returns the part of the string to the right of a backslash (\) character from a parameter named User:
```
=Right(Parameters!User.Value, Len(Parameters!User.Value) - InStr(Parameters!User.Value, "\"))
```
The following expression results in the same value as the previous one, using members of the .NET Framework System.String class instead of Visual Basic functions:
```
=Parameters!User.Value.Substring(Parameters!User.Value.IndexOf("\")+1, Parameters!User.Value.Length-Parameters!User.Value.IndexOf("\")-1)
```
Display the selected values from a multivalue parameter. The following example uses the Join function to concatenate the selected values of the parameter MySelection into a single string that can be set as an expression for the value of a text box in a report item:
```
= Join(Parameters!MySelection.Value)
```
The Regex functions from the .NET Framework RegularExpressions are useful for changing the format of existing strings, for example, formatting a telephone number. The following expression uses the Replace function to change the format of a ten-digit telephone number in a field from "nnn-nnn-nnnn" to "(nnn) nnn-nnnn":
```
=System.Text.RegularExpressions.Regex.Replace(Fields!Phone.Value, "(\d{3})[ -.]*(\d{3})[ -.]*(\d{4})", "($1) $2-$3")
```

Conversion Functions

You can use Visual Basic functions to convert a field from the one data type to a different data type. Conversion functions can be used to convert a the default data type for a field to the data type needed for calculations or to combine text.

The following expression converts the constant 500 to type Decimal in order to compare it to a Transact-SQL money data type in the Value field for a filter expression.
```
=CDec(500)
```
The following expression displays the number of values selected for the multivalue parameter MySelection.
```
=CStr(Parameters!MySelection.Count)
```

Decision Functions

The Iif function returns one of two values depending on whether the expression is true or not. The following expression uses the Iif function to return a Boolean value of True if the value of LineTotal exceeds 100. Otherwise it returns False:
```
=IIF(Fields!LineTotal.Value > 100, True, False)
```
Use multiple IIF functions (also known as "nested IIFs") to return one of three values depending on the value of PctComplete. The following expression can be placed in the fill color of a text box to change the background color depending on the value in the text box.
```
=IIF(Fields!PctComplete.Value >= 10, "Green", IIF(Fields!PctComplete.Value >= 1, "Blue", "Red"))
```
Values greater than or equal to 10 display with a green background, between 1 and 9 display with a blue background, and less than 1 display with a red background.
A different way to get the same functionality uses the Switch function. The Switch function is useful when you have three or more conditions to test. The Switch function returns the value associated with the first expression in a series that evaluates to true:
```
=Switch(Fields!PctComplete.Value >= 10, "Green", Fields!PctComplete.Value >= 1, "Blue", Fields!PctComplete.Value = 1, "Yellow", Fields!PctComplete.Value <= 0, "Red",)
```
Values greater than or equal to 10 display with a green background, between 1 and 9 display with a blue background, equal to 1 display with a yellow background, and 0 or less display with a red background.
Test the value of the ImportantDate field and return "Red" if it is more than a week old, and "Blue" otherwise. This expression can be used to control the Color property of a text box in a report item:
```
=IIF(DateDiff("d",Fields!ImportantDate.Value, Now())>7,"Red","Blue")
```
Test the value of the PhoneNumber field and return "No Value" if it is null (Nothing in Visual Basic); otherwise return the phone number value. This expression can be used to control the value of a text box in a report item.
```
=IIF(Fields!PhoneNumber.Value Is Nothing,"No Value",Fields!PhoneNumber.Value)
```
Test the value of the Department field and return either a subreport name or a null (Nothing in Visual Basic). This expression can be used for conditional drillthrough subreports.
```
=IIF(Fields!Department.Value = "Development", "EmployeeReport", Nothing)
```
Test if a field value is null. This expression can be used to control the Hidden property of an image report item. In the following example, the image specified by the field [LargePhoto] is displayed only if the value of the field is not null.
```
=IIF(IsNothing(Fields!LargePhoto.Value),True,False)
```

Report Functions

Reporting Services provides additional report functions that you can use to manipulate data in a report. This section provides examples for two of these functions. For more information about report functions and examples, see Using Built-in Report and Aggregate Functions in Expressions (Report Builder 2.0).

Sum

The Sum function can total the values in a group or data region. This function can be useful in the header or footer of a group. The following expression displays the sum of data in the Order group or data region:
```
=Sum(Fields!LineTotal.Value, "Order")
```
You can also use the Sum function for conditional aggregate calculations. For example, if a dataset has a field that is named State with possible values Not Started, Started, Finished, the following expression, when placed in a group header, calculates the aggregate sum for only the value Finished:
```
=Sum(IIF(Fields!State.Value = "Finished", 1, 0))
```

RowNumber

The RowNumber function, when used in a text box within a data region, displays the row number for each instance of the text box in which the expression appears. This function can be useful to number rows in a table. It can also be useful for more complex tasks, such as providing page breaks based on number of rows. For more information, see Page Breaks in this topic.

The scope you specify for RowNumber controls when renumbering begins. The Nothing keyword indicates that the function will start counting at the first row in the outermost data region. To start counting within nested data regions, use the name of the data region. To start counting within a group, use the name of the group.
```
=RowNumber(Nothing)
```

Appearance of Report Data

You can use expressions to manipulate how data appears on a report. For example, you can display the values of two fields in a single text box, display information about the report, or affect how page breaks are inserted in the report.

Page Headers and Footers

When designing a report, you may want to display the name of the report and page number in the report footer. To do this, you can use the following expressions:

The following expression provides the name of the report and the time it was run. It can be placed in a text box in the report footer or in the body of the report. The time is formatted with the .NET Framework formatting string for short date:
```
=Globals.ReportName & ", dated " & Format(Globals.ExecutionTime, "d")
```
The following expression, placed in a text box in the footer of a report, provides page number and total pages in the report:
```
=Globals.PageNumber & " of " & Globals.TotalPages
```

The following examples describe how to display the first and last values from a page in the page header, similar to what you might find in a directory listing. The example assumes a data region that contains a text box named LastName.

The following expression, placed in a text box on the left side of the page header, provides the first value of the LastName text box on the page:
```
=First(ReportItems("LastName").Value)
```
The following expression, placed in a text box on the right side of the page header, provides the last value of the LastName text box on the page:
```
=Last(ReportItems("LastName").Value)
```

The following example describes how to display a page total. The example assumes a data region that contains a text box named Cost.

The following expression, placed in the page header or footer, provides the sum of the values in the Cost text box for the page:
```
=Sum(ReportItems("Cost").Value)
```

Note

You can refer to only one report item per expression in a page header or footer. Also, you can refer to the text box name, but not the actual data expression within the text box, in page header and footer expressions.

Page Breaks

In some reports, you may want to place a page break at the end of a specified number of rows instead of, or in addition to, on groups or report items. To do this, create a group that contains the groups or detail records you want, add a page break to the group, and then add a group expression to group by a specified number of rows.

The following expression, when placed in the group expression, assigns a number to each set of 25 rows. When a page break is defined for the group, this expression results in a page break every 25 rows.
```
=Ceiling(RowNumber(Nothing)/25)
```
To allow the user to set a value for the number of rows per page, create a parameter named RowsPerPage and base the group expression on the parameter, as shown in the following expression:
```
=Ceiling(RowNumber(Nothing)/Parameters!RowsPerPage.Value)
```
For more information about setting page breaks for a group, see How to: Add a Page Break (Report Builder 2.0).

Properties

Expressions are not only used to display data in text boxes. They can also be used to change how properties are applied to report items. You can change style information for a report item, or change its visibility.

Formatting

The following expression, when used in the Color property of a text box, changes the color of the text depending on the value of the Profit field:
```
=Iif(Fields!Profit.Value < 0, "Red", "Black")
```
You can also use the Visual Basic object variable Me. This variable is another way of referring to the value of a text box.

=Iif(Me.Value < 0, "Red", "Black")
The following expression, when used in the BackgroundColor property of a report item in a data region, alternates the background color of each row between pale green and white:
```
=Iif(RowNumber(Nothing) Mod 2, "PaleGreen", "White")
```
If you are using an expression for a specified scope, you may have to indicate the dataset for the aggregate function:
```
=Iif(RowNumber("Employees") Mod 2, "PaleGreen", "White")
```

Note

Available colors come from the .NET FrameworkKnownColor enumeration.

Visibility

You can show and hide items in a report using the visibility properties for the report item. In a data region such as a table, you can initially hide detail rows based on the value in an expression.

The following expression, when used for initial visibility of detail rows in a group, shows the detail rows for all sales exceeding 90 percent in the PctQuota field:
```
=Iif(Fields!PctQuota.Value>.9, False, True)
```
The following expression, when set in the Hidden property of a table, shows the table only if it has more than 12 rows:
```
=IIF(CountRows()>12,true,false)
```
The following expression, when set in the Hidden property of a column, shows the column only if the field exists in the report dataset after the data is retrieved from the data source:
```
=IIF(Fields!Column_1.IsMissing, true, false)
```

URLs

You can customize URLs by using report data and also conditionally control whether URLs are added as an action for a text box.

The following expression, when used as an action on a text box, generates a customized URL that specifies the dataset field EmployeeID as a URL parameter.
```
="http://adventure-works/MyInfo?ID=" & Fields!EmployeeID.Value
```
For more information, see How to: Add a Hyperlink to a URL (Report Builder 2.0).
The following expression conditionally controls whether to add a URL in a text box. This expression depends on a parameter named IncludeURLs that allows a user to decide whether to include active URLs in a report. This expression is set as an action on a text box. By setting the parameter to False and then viewing the report, you can export the report Microsoft Excel without hyperlinks.
```
=IIF(Parameters!IncludeURLs.Value,"http://adventure-works.com/productcatalog",Nothing)
```

Report Data

Expressions can be used to manipulate the data that is used in the report. You can refer to parameters and other report information. You can even change the query that is used to retrieve data for the report.

Parameters

You can use expressions in a parameter to vary the default value for the parameter. For example, you can use a parameter to filter data to a particular user based on the user ID that is used to run the report.

The following expression, when used as the default value for a parameter, collects the user ID of the person running the report:
```
=User!UserID
```
To refer to a parameter in a query parameter, filter expression, text box, or other area of the report, use the Parameters global collection. This example assumes that the parameter is named Department:
```
=Parameters!Department.Value
```
Parameters can be created in a report but set to hidden. When the report runs on the report server, the parameter does not appear in the toolbar and the report reader cannot change the default value. You can use a hidden parameter set to a default value as custom constant. You can use this value in any expression, including a field expression. The following expression identifies the field specified by the default parameter value for the parameter named ParameterField:
```
=Fields(Parameters!ParameterField.Value).Value
```

Custom Code

You can use custom code in a report. Custom code is either embedded in a report or stored in a custom assembly which is used in the report. For more information about custom code, see Using Custom Code References in Expressions (Report Builder 2.0).

The following example calls an embedded code method called ToUSD, which converts the StandardCost field value to a dollar value:
```
=Code.ToUSD(Fields!StandardCost.Value)
```
The following example shows how to define some custom constants and variables.

[Visual Basic]
```
Public Const MyNote = "Authored by Bob"
Public Const NCopies As Int32 = 2
Public Dim  MyVersion As String = "123.456"
Public Dim MyDoubleVersion As Double = 123.456
```
Although custom constants and variables do not appear in the Expression Editor Constants view (which only displays built-in constants), you can add references to them from any expression, as shown in the following examples. These are treated as Variants.

[Visual Basic]
```
=Code.MyNote
=Code.NCopies 
=Code.MyVersion
=Code.MyDoubleVersion
```

Replacing Text in a Field at Run Time

The following example calls an embedded method called FixSpelling, which substitutes "Bicycle" for all occurrences of the text "Bike" in SubCategory.Value.

=Code.FixSpelling(Fields!SubCategory.Value)

The following code, when embedded in a report definition, shows an implementation of the FixSpelling method. This example shows you how to refer to the .NET Framework System.Text.StringBuilder class. For more information, see How to: Add Code to a Report (Report Builder 2.0).

Public Function FixSpelling(ByVal s As String) As String
   Dim strBuilder As New System.Text.StringBuilder(s)
   If s.Contains("Bike") Then
      strBuilder.Replace("Bike", "Bicycle")
      Return strBuilder.ToString()
      Else : Return s
   End If
End Function

Suppressing Null or Zero Values at Run Time

Some values in an expression can evaluate to null or undefined at report processing time. This can create run-time errors that result in #Error displaying in the text box instead of the evaluated expression. The IIF function is particularly sensitive to this behavior because, unlike an If-Then-Else statement, each part of the IIF statement is evaluated (including function calls) before being passed to the routine that tests for true or false. The statement =IIF(Fields!Sales.Value is NOTHING, 0, Fields!Sales.Value) generates #Error in the rendered report if Fields!Sales.Value is NOTHING.

To avoid this condition, use one of the following strategies:

Set the numerator to 0 and the denominator to 1 if the value for field B is 0 or undefined; otherwise, set the numerator to the value for field A and the denominator to the value for field B.
```
=IIF(Field!B.Value=0, 0, Field!A.Value / IIF(Field!B.Value =0, 1, Field!B.Value))
```
Use a custom code function to return the value for the expression. The following example returns the percentage difference between a current value and a previous value. This can be used to calculate the difference between any two successive values and it handles the edge case of the first comparison (when there is no previous value) and cases whether either the previous value or the current value is null (Nothing in Visual Basic).
```
Public Function GetDeltaPercentage(ByVal PreviousValue, ByVal CurrentValue) As Object
    If IsNothing(PreviousValue) OR IsNothing(CurrentValue) Then
        Return Nothing
    Else if PreviousValue = 0 OR CurrentValue = 0 Then
        Return Nothing
    Else 
        Return (CurrentValue - PreviousValue) / CurrentValue
    End If
End Function
```
The following expression shows how to call this custom code from a text box:
```
=Code.GetDeltaPercentage(Previous(Sum(Fields!Sales.Value),"ColumnGroupByYear"), Sum(Fields!Sales.Value))
```
This avoids run-time exceptions and you can use an expression like =IIF(Me.Value < 0, "red", "black") in the Color property of the text box to conditionally the display text based on the values.

Share via