InventMov_TransferFrom Class [AX 2012]

The InventMov_TransferFrom class is used together with inventory transfer orders.

Syntax

class InventMov_TransferFrom extends InventMov_Transfer

Run On

Called

Methods

	Method	Description
	accountBalanceAutoLossProfit	Changes an account based on the InventIssue enumeration value to the InventIssueFA enumeration value when a fixed asset is set. (Inherited from InventMovement.)
	accountBalanceSheet	(Inherited from InventMov_Transfer.)
	accountCharge	Determines the charge ledger account. (Inherited from InventMovement.)
	accountOperations	(Inherited from InventMov_Transfer.)
	accountOperationsAutoLossProfit	(Inherited from InventMovement.)
	accountPhysical	(Inherited from InventMovement.)
	accountPhysicalRevenue	(Inherited from InventMovement.)
	accountPhysicalRevenueOffset	(Inherited from InventMovement.)
	accountPhysicalTax	(Inherited from InventMovement.)
	accountStdLoss	(Inherited from InventMovement.)
	accountStdOffset	(Inherited from InventMovement.)
	accountStdProfit	(Inherited from InventMovement.)
	accountStockVariation	Determines the stock variation ledger account. (Inherited from InventMovement.)
	activityNumber	(Inherited from InventMovement.)
	addRemainFinancialUnit	(Inherited from InventMovement.)
	addRemainPhysical	Adds the specified InventQty to the qtyRemainShip of the InventTransferLine that is related to this movement. (Overrides the addRemainPhysical Method.)
	addRemainPhysicalUnit	(Inherited from InventMovement.)
	adjustInventDimReservationCriteria	Adjust the inventDimCriteria for reservation. (Inherited from InventMovement.)
	adjustmentMovement	Specifies whether movements are created as adjustments to previous transactions. (Inherited from InventMovement.)
	adjustToFixedReceiptPrice	Returns whether a receipt should be adjusted to fixed receipt price. (Inherited from InventMovement.)
	adjustTransactionInventDimEstimated	Creates an inventDim based on the movement inventDim and adjusts it as needed to be used on the estimated inventTrans. (Inherited from InventMovement.)
	allowNegativePhysicalForBlockingStatus	Determines if validation should allow a negative physical available quantity for inventory status blocking. (Inherited from InventMovement.)
	assemblyInventTransOriginId	Retrieves the ID of the assembly inventory transaction originator that corresponds to the movement. (Inherited from InventMovement.)
	assetBookId	(Inherited from InventMovement.)
	assetId	(Inherited from InventMovement.)
	autoLossProfitInventMovVirtuel	(Inherited from InventMovement.)
	autoReserveQty	(Inherited from InventMovement.)
	batchDispReservationBlockedFieldId	Gets the field ID of the PdsDispositionMaster table for reservation blocking control field for the type of movement. (Overrides the batchDispReservationBlockedFieldId Method.)
	batchExpDate	(Inherited from InventMovement.)
	batchProdDate	(Inherited from InventMovement.)
	buffer	(Inherited from InventMovement.)
	calcEstimatedUnit	(Inherited from InventMovement.)
	calculateIndirectCost	Calculates the indirect cost that is related to the movement. (Inherited from InventMovement.)
	canBeAutoRepAsFinished	(Inherited from InventMov_Transfer.)
	canBeOnAllInventLocations	Determines whether the movement can be on all warehouses. (Inherited from InventMov_Transfer.)
	canBeOnAllInventSites	Determines whether the movement can be on all sites. (Inherited from InventMov_Transfer.)
	canBeOnSupermarket	Indicates whether a movement can have an InventDimId value that represents a kanban supermarket. (Inherited from InventMovement.)
	canBeReserved	Indicates whether the InventMovement instance, such as a salesLine, can be reserved. (Inherited from InventMovement.)
	canBeUpdatedEstimated	(Inherited from InventMovement.)
	canBeUpdatedFinancial	(Inherited from InventMovement.)
	canBeUpdatedPhysical	(Inherited from InventMovement.)
	canBeUpdatedPicked	(Inherited from InventMovement.)
	canBeUpdatedRegistered	(Inherited from InventMovement.)
	cancelTimeOut	Cancels a previous method call to the setTimeOut method. (Inherited from Object.)
	canChangeConsistentDim	Checks whether consistent dimensions can be modified. (Inherited from InventMovement.)
	canChangeStorageConsistentDimWhenFinUpd	Specifies whether consistent storage dimensions may be changed when inventory transactions are financially updated. (Inherited from InventMovement.)
	canCommittedCostBeReversed	(Inherited from InventMovement.)
	canCostValuebeChanged	(Inherited from InventMovement.)
	canHaveReservedWork	Determines if the movement type can have WHS work created that takes over reserving the lower levels of the hierarchy. (Overrides the canHaveReservedWork Method.)
	canInventTransBeFinancialUpdated	(Inherited from InventMovement.)
	canInventTransBePhysicalUpdated	Verifies whether an inventory transaction can be physically updated. (Inherited from InventMovement.)
	canReservationFormBeEdited	(Inherited from InventMovement.)
	canReservationFormBeShown	(Inherited from InventMovement.)
	canUpdateInventStatusBlocking	Determines if the movment can update inventory status blocking transactions (Inherited from InventMovement.)
	canUpdateOnHandDatePhysicalOnReturn	Determines whether the physical date of on-hand inventory can be updated when items are returned. (Inherited from InventMovement.)
	caseTagging	(Inherited from InventMovement.)
	checkAllowManualMarking	(Inherited from InventMovement.)
	checkCountingLocks	(Inherited from InventMovement.)
	checkDimFieldsValid	Validate that the specified inventory dimensions are valid. (Inherited from InventMovement.)
	checkDimInventOwnerId_RU	(Inherited from InventMovement.)
	checkDimPhysical	Validates the physical dimensions of a given InventDim table buffer for the current movement. (Inherited from InventMovement.)
	checkInventDimForInventDimField	Validates the physical dimensions of a given InventDim table buffer for the passed InventDim table field. (Inherited from InventMovement.)
	checkInventLocationId	Checks whether the InventLocationId value of the InventDim record of this movement is the same as the InventLocationId value of the TransferFrom location of the InventTransferTable Table that is related to this movement. (Overrides the checkInventLocationId Method.)
	checkInventSiteDimension	Validates the used inventory dimensions against the used financial dimensions. (Inherited from InventMovement.)
	checkLocationBlocking	(Inherited from InventMovement.)
	checkNotOverDelivery	Verify whether the movement quantities cause overdelivery. (Inherited from InventMovement.)
	checkNotSubDelivery	(Inherited from InventMovement.)
	checkProfileOwner_RU	(Inherited from InventMovement.)
	checkUpdateArrived	(Inherited from InventMovement.)
	checkUpdateChildReference	(Inherited from InventMovement.)
	checkUpdateEstimated	(Inherited from InventMov_Transfer.)
	checkUpdateEstimatedMovement	Indicates whether the estimated transactions value must be updated. (Inherited from InventMovement.)
	checkUpdateFinancial	(Inherited from InventMovement.)
	checkUpdatePhysical	(Inherited from InventMovement.)
	checkUpdatePicked	(Inherited from InventMov_Transfer.)
	checkUpdateRegistered	(Inherited from InventMovement.)
	checkUpdateReservation	Validates that used inventory items cannot be reserved at the destination warehouse. (Overrides the checkUpdateReservation Method.)
	checkUpdateStandard	(Inherited from InventMovement.)
	checkWHSLoadLineInventTransConsistency	Validates that the WHSLoadLine loadlines related to the source line is in sync with the inventory transactions. (Overrides the checkWHSLoadLineInventTransConsistency Method.)
	checkWMSLocation	Checks the InventDim.WMSLocationId field of the inventory dimensions of the movement. (Inherited from InventMovement.)
	childBuffer	(Inherited from InventMovement.)
	clearInventRefFields	Sets reference fields based on owner so that they do not reference anything. (Inherited from InventMovement.)
	correctionSwapOnItem_RU	Indicates whether the correction flag should be swapped. (Inherited from InventMov_Transfer.)
	costValueChanged	(Inherited from InventMovement.)
	createInventTransPosting	(Inherited from InventMovement.)
	createOriginOwnerRelationship	Creates the relationship between the inventory transactions originator and the owner. (Overrides the createOriginOwnerRelationship Method.)
	createQuarantineOrder	(Inherited from InventMovement.)
	custVendAc	(Inherited from InventMovement.)
	defaultDimension	This method will return the DefaultDimension based up on the InventTransId (Overrides the defaultDimension Method.)
	deleteOriginOwnerRelationship	Deletes the relationship between the inventory transactions originator and the owner that corresponds. (Overrides the deleteOriginOwnerRelationship Method.)
	deliveryPostalAddress	Identifies the postal delivery address of the inventory movement. (Inherited from InventMov_Transfer.)
	dimAllowBlankIssue	(Inherited from InventMov_Transfer.)
	dimAllowBlankReceipt	(Inherited from InventMov_Transfer.)
	dimParmRelatedUpdate	(Inherited from InventMovement.)
	dirParty	Retrieves the party ID of the customer or vendor that is related to the movement. (Inherited from InventMovement.)
	dlvMode	(Inherited from InventMov_Transfer.)
	dlvTerm	(Inherited from InventMov_Transfer.)
	doScrap	(Inherited from InventMovement.)
	doSumUp	Sums inventory transactions related to current inventory movement. (Inherited from InventMovement.)
	ecoResProductDimGroupSetup	Retrieves an instance of the EcoResProductDimGroupSetup class that controls how product dimensions are configured for this movement. (Inherited from InventMovement.)
	enforceSerialDimensionQuantityControl	Determines whether the movement type enforces a quantity of 1.0 for serial control. (Inherited from InventMovement.)
	enteredPcsPrice	(Inherited from InventMovement.)
	equal	Determines whether the specified object is equal to the current one. (Inherited from Object.)
	estimatedFinancialValue	(Inherited from InventMovement.)
	estimatedFinancialValueSecCur_RU	(Inherited from InventMovement.)
	estimatedPhysicalRevenue	(Inherited from InventMovement.)
	estimatedPhysicalTax	(Inherited from InventMovement.)
	estimatedPhysicalValue	Get the estimated physical value for an inventory transaction. (Inherited from InventMovement.)
	estimatedPhysicalValuePublic	Gets the estimated physical value of an inventory transaction. (Inherited from InventMovement.)
	estimatedPhysicalValueSecCur_RU	Get the estimated physical value in reporting currency for an inventory transaction. (Inherited from InventMovement.)
	estimatedPhysicalValueSecCurPublic_RU	Get the estimated physical value in reporting currency for an inventory transaction. (Inherited from InventMovement.)
	financialIssueCostValue	(Inherited from InventMovement.)
	financialIssueCostValueSecCur_RU	(Inherited from InventMovement.)
	financialUpdateReceiptQty_IN	Gets the financial update receipt quantity and the catch-weight financial update receipt quantity. (Inherited from InventMov_Transfer.)
	forceReturnLotInInventTrans_RU	Specifies whether a Return lot will be write down to the inventory transaction against a common rules. (Inherited from InventMovement.)
	freightSlipType	(Inherited from InventMov_Transfer.)
	freightZone	(Inherited from InventMov_Transfer.)
	getExpiryCheckDate	Gets the date to check against for an expiry date. (Overrides the getExpiryCheckDate Method.)
	getInventDimForIssueTransFromReceipt	Returns the InventDim that should be put on the issue transaction during a receipt which updates the issue transaction for WHS items. (Inherited from InventMovement.)
	getInventDimForReservedTransPhysChange	Returns the InventDim that should be put on the transaction when reservation status is updated from ordered to physical. (Inherited from InventMovement.)
	getModuleType_CN	Gets the value of module type. (Inherited from InventMovement.)
	getQtyPreForNotOverDeliveryCheck_IN	Gets the quantity preservation for the over-delivery check. (Inherited from InventMov_Transfer.)
	getQtyRemainReceive	Gets the quantity that remains to be received. (Inherited from InventMov_Transfer.)
	getQtyRemainShip	Gets the quantity that remains to be shipped. (Inherited from InventMov_Transfer.)
	getTimeOutTimerHandle	Returns the timer handle for the object. (Inherited from Object.)
	handle	Retrieves the handle of the class of the object. (Inherited from Object.)
	hasBestBeforeDateLimit	(Inherited from InventMovement.)
	hasExpiryDateLimit	(Inherited from InventMovement.)
	hasVirtualTransactions	(Inherited from InventMovement.)
	initDimParmAutoReserv	(Inherited from InventMovement.)
	initForAutoReservation	Initializes the movement for auto reservation. (Inherited from InventMovement.)
	initInventTransFinancial	(Inherited from InventMovement.)
	initInventTransFromBuffer	(Inherited from InventMovement.)
	initInventTransPhysical	(Inherited from InventMovement.)
	initInventTransPicked	(Inherited from InventMovement.)
	initWMSOrder	Initialize a WMSOrder record. (Inherited from InventMovement.)
	insertChildBuffer	(Inherited from InventMovement.)
	interCompanyMarkingAllowed	(Inherited from InventMovement.)
	interCompanyMovement	(Inherited from InventMovement.)
	interCompanyTransaction	(Inherited from InventMovement.)
	inventCostIndirectFinancial	Retrieves an InventCostIndirectFinancial object. (Inherited from InventMovement.)
	inventCostIndirectPhysical	Retrieves a InventCostIndirectPhysical object. (Inherited from InventMovement.)
	inventdim	(Inherited from InventMovement.)
	inventDimFrom	(Overrides the inventDimFrom Method.)
	inventDimGroupSetup	Retrieves an instance of the InventDimGroupSetup class that controls how inventory dimensions are configured for this movement. (Inherited from InventMovement.)
	inventDimId	Returns the InventDimId of the InventTransferLine that is related to this movement. (Overrides the inventDimId Method.)
	inventDimIdTransferIssue	Returns an InventDimId Id for the issue transactions that corresponds to a receipt. (Inherited from InventMovement.)
	inventDimMerged	(Overrides the inventDimMerged Method.)
	inventDimParmMatchTransferTrans	Retrieves an InventDimParm table buffer that is used to find the related InventTrans records. (Inherited from InventMov_Transfer.)
	inventDimTo	(Overrides the inventDimTo Method.)
	inventItemInventSetup	Retrieves an InventItemInventSetup buffer. (Inherited from InventMovement.)
	inventItemOrderCheckNotStopped	Checks if the item in question is stopped in the inventory. (Inherited from InventMovement.)
	inventItemOrderSetupMap	Retrieves an InventItemOrderSetupMap table map. (Inherited from InventMovement.)
	inventLocationId	(Inherited from InventMovement.)
	inventModelGroup	(Inherited from InventMovement.)
	inventModelType	(Inherited from InventMovement.)
	inventModelTypeSecCur_RU	(Inherited from InventMovement.)
	inventMovSubType	(Inherited from InventMovement.)
	inventSiteId	(Inherited from InventMovement.)
	inventTable	(Inherited from InventMovement.)
	inventTableInvent	(Inherited from InventMovement.)
	inventTransOriginId	Sets the ID of the inventory transaction originator that corresponds to the movement. (Overrides the inventTransOriginId Method.)
	inventTransOriginTransferId	Gets the ID of the inventory transaction originator that corresponds to the movement. (Inherited from InventMovement.)
	isItemWHSEnabled	Determines if the item for this movement is enabled for using the WHS system. (Inherited from InventMovement.)
	isPrimaryMovement	(Inherited from InventMovement.)
	isProjTransCorrection	Indicates whether the project transaction should be marked as correction or not. (Inherited from InventMovement.)
	isReturned	Determines whether the movement represents a return. (Inherited from InventMovement.)
	isStockTransfer_IN	Checks whether the transfer type is stock transfer. (Inherited from InventMov_Transfer.)
	isStorageDimensionOnlyTransfer	Indicates whether the movement operates only with the storage dimensions during transfers. (Inherited from InventMovement.)
	isTransfer	(Inherited from InventMov_Transfer.)
	isVirtuel	(Inherited from InventMovement.)
	itemDescription	(Inherited from InventMov_Transfer.)
	itemGroupId	Retrieves an item group ID of the item related to this movement. (Inherited from InventMovement.)
	itemId	(Inherited from InventMov_Transfer.)
	itemTagging	(Inherited from InventMovement.)
	markingInventDimParmFixed	Fills an InventDimParm buffer with values that specify which dimensions are fixed when marking is applied. (Inherited from InventMovement.)
	markingPreferPhysical	Determines whether the physically updated transactions are preferred over expected when finding transactions for marking. (Inherited from InventMovement.)
	markingRefInventTransOrigin	Returns the ID of the marked transaction origin. (Overrides the markingRefInventTransOrigin Method.)
	mayScrapBeExpected	(Inherited from InventMovement.)
	mcrReserveQty	Calculates the quantity to reserve. (Inherited from InventMovement.)
	mcrSetInventDeliverNow	Sets the deliver now quantity. (Inherited from InventMovement.)
	mcrSetReservation	Sets the quantity to be reserved. (Inherited from InventMovement.)
	mcrSetSalesDeliverNow	Sets the deliver now quantity. (Inherited from InventMovement.)
	mcrUpdateDetailedStatus	Updates the sales or purchase order detailed status. (Inherited from InventMovement.)
	mergeTransDimTransferReceipt	(Inherited from InventMovement.)
	minAllowedBestBeforeDate	(Inherited from InventMovement.)
	minAllowedExpiryDate	(Inherited from InventMovement.)
	moduleType	(Inherited from InventMovement.)
	mustAggregateExpectedTransactions	Determines whether the expected transactions related to this movement must be aggregated. (Inherited from InventMovement.)
	mustBeAutoReserved	Determines whether the inventMovement object must be auto-reserved. (Inherited from InventMov_Transfer.)
	mustBeBookedBalanceSheet	(Inherited from InventMovement.)
	mustBeBookedCharge	Determines if charges must be booked. (Inherited from InventMovement.)
	mustBeBookedFinancially	(Inherited from InventMov_Transfer.)
	mustBeBookedOnhand	(Inherited from InventMovement.)
	mustBeBookedOnhandSecCur_RU	(Inherited from InventMovement.)
	mustBeBookedOperations	(Inherited from InventMovement.)
	mustBeBookedPhysically	(Inherited from InventMov_Transfer.)
	mustBeBookedPhysicalRevenue	(Inherited from InventMovement.)
	mustBeBookedPhysicalTax	(Inherited from InventMovement.)
	mustBeCostControlled	(Inherited from InventMovement.)
	mustBeDeducted	Determines whether model group associated with current InventMovement object requires mandatory deduct. (Inherited from InventMovement.)
	mustBeExpectedAgain	(Inherited from InventMovement.)
	mustBePicked	Determines whether the transactions related to this movement must be picked. (Inherited from InventMovement.)
	mustBeQuarantineControlled	(Inherited from InventMov_Transfer.)
	mustBeQuotationControlled	(Inherited from InventMovement.)
	mustBeReceived	Determines whether the model group associated with the current InventMovement object must be received. (Inherited from InventMovement.)
	mustBeRegistered	Determines whether the transactions that are related to this movement must be registered. (Inherited from InventMovement.)
	mustBeRemainControlled	(Inherited from InventMov_Transfer.)
	mustBeSameTransSign	(Inherited from InventMov_Transfer.)
	mustBeUnitControlled	(Inherited from InventMovement.)
	mustBeUpdatedExpected	(Inherited from InventMovement.)
	mustBeWMSOrderControlled	(Inherited from InventMovement.)
	mustCheckLocationBlocking	(Inherited from InventMovement.)
	mustCheckOverDelivery	Determines whether the current InventMovement object requires checking for over delivery. (Inherited from InventMovement.)
	mustCheckOverDeliveryForQty	Determines whether the current InventMovement object requires checking for over delivery for the specified quantity. (Inherited from InventMovement.)
	mustClearChildRef	(Inherited from InventMovement.)
	mustCreateQuarantineOrder	(Inherited from InventMovement.)
	mustDoAutoLossProfitEstimate	(Inherited from InventMovement.)
	mustDoAutoLossProfitFinancial	(Inherited from InventMovement.)
	mustDoAutoLossProfitPhysical	(Inherited from InventMovement.)
	mustDoProjPhysicalAdjust	(Inherited from InventMovement.)
	mustDoProjPhysicalPosting	(Inherited from InventMovement.)
	mustDoProjPosting	(Inherited from InventMovement.)
	mustPhysicallyUnreserveBlocking	For inventory blocking unreservation, determines whether physical inventory reservation must be removed. (Inherited from InventMovement.)
	mustRegisterTrackingDimension	Determines whether the movement type supports inventory tracking (Inherited from InventMovement.)
	mustReserveBasedOnMarkingOnCreation	Determines if issue transactions need to be reserved because of marking during creation. (Inherited from InventMovement.)
	mustSetProjAdjRefInventTrans	(Inherited from InventMovement.)
	mustSetProjAdjustRefInventTrans	(Inherited from InventMovement.)
	mustShowMarkingWarningOnUpdate	Determines if a warning message is shown if marking cannot be updated according to dimensions. (Inherited from InventMovement.)
	mustUpdateBatchAttribValues	Determines whether the movement should update the batch attributes on the related quality orders. (Inherited from InventMovement.)
	mustUpdateGeneralJournal	Gets a value that indicates whether to post the inventory movement to the general journal. (Inherited from InventMovement.)
	mustUpdateInventTableCostPrice	Indicates whether the movement can update the cost price on the related InventTable table. (Inherited from InventMov_Transfer.)
	mustUpdateInventTransFields	Determines if the movement can update the fields of the related InventTrans. (Inherited from InventMovement.)
	mustUpdateInventTransOriginFields	(Inherited from InventMovement.)
	mustUpdateRelatedTrans	(Inherited from InventMovement.)
	mustUseParentMovToDimTransferReceipt	(Inherited from InventMovement.)
	mustValidatePalletLocation	Determines if pallet location must be validated during put away for the current movement. (Inherited from InventMovement.)
	needsShelfLifeCheck	(Inherited from InventMovement.)
	new	(Inherited from InventMov_Transfer.)
	newMovement_Orig	Returns a new InventMov_TransferFrom that is based on the original InventTransferLine. (Overrides the newMovement_Orig Method.)
	newMovement_TransferIssue	Returns this instance of InventMovement. (Overrides the newMovement_TransferIssue Method.)
	newMovement_TransferIssueReceive	(Inherited from InventMovement.)
	newMovement_TransferReceipt	Returns a value of new InventMovement that is based on the movement of InventTransferLine and an InventMovSunType of TransferOrderTransitTo. (Overrides the newMovement_TransferReceipt Method.)
	newMovement_TransferReceiptShip	(Overrides the newMovement_TransferReceiptShip Method.)
	notify	Releases the hold on an object that has called the wait method on this object. (Inherited from Object.)
	notifyAll	Releases a lock on the object that was issued by the wait method on this object. (Inherited from Object.)
	objectOnServer	Determines whether the object is on a server. (Inherited from Object.)
	offsetAccountPhysical	(Inherited from InventMovement.)
	onlyCheckStorageDimInConsistentCheck	Specifies whether to check only storage dimensions when you verify whether consistent dimensions can be changed. (Inherited from InventMovement.)
	overDeliveryPct	(Inherited from InventMov_Transfer.)
	owner	Returns the instance that owns the object. (Inherited from Object.)
	palletTagging	(Inherited from InventMovement.)
	parentMovement	(Inherited from InventMovement.)
	parmBurdenItem	This method gets/sets if the movement is a burden item (Inherited from InventMovement.)
	parmCustomsLoadOnInventory_IN	Gets or sets the CustomsLoadOnInventory_IN parameter. (Inherited from InventMovement.)
	parmCustomsLoadOnInventoryMST_IN	Gets or sets the CustomsLoadOnInventoryMST_IN parameter. (Inherited from InventMovement.)
	parmDistributionLedgerPosting	Gets or sets the DistributionLedgerPosting parameter. (Inherited from InventMovement.)
	parmExchangeRateDate	Gets or sets the ExchangeRateDate parameter. (Inherited from InventMovement.)
	parmGoodsInRoute_RU	Gets or sets the GoodsInRoute_RU parameter. (Inherited from InventMovement.)
	parmIndirectCostAmount_RU	Gets or sets the IndirectCostAmount_RU parameter. (Inherited from InventMovement.)
	parmIndirectCostAmountSecCur_RU	Gets or sets the IndirectCostAmountSecCur_RU parameter. (Inherited from InventMovement.)
	parmInventCostTransVarianceList	Gets or sets the InventCostTransVarianceList parameter. (Inherited from InventMovement.)
	parmInventParmID_IN	Gets and sets the Parm ID of the InventTransferParmLine Table (Inherited from InventMovement.)
	parmInventRefTransId_RU	Gets or sets the InventRefTransId_RU parameter. (Inherited from InventMovement.)
	parmInventTransIdDelivery_RU	Gets or sets the InventTransIdDelivery_RU parameter. (Inherited from InventMovement.)
	parmInventTransIdTransit_RU	Gets or sets the InventTransIdTransit_RU parameter. (Inherited from InventMovement.)
	parmInventTransOriginIdRef_virtuel	Gets or sets the InventTransOriginIdRef_virtuel parameter. (Inherited from InventMovement.)
	parmMarkingRefInventTransOrigin_RU	Gets or sets the MarkingRefInventTransOrigin_RU parameter. (Inherited from InventMovement.)
	parmMCRInventTransRecid	Gets or sets the MCRInventTransRecid parameter. (Inherited from InventMovement.)
	parmMustBeQuarantineControled	Gets or sets the MustBeQuarantineControled parameter. (Inherited from InventMovement.)
	parmMustDoAutoLossProfitForbid	Gets or sets the MustDoAutoLossProfitForbid parameter. (Inherited from InventMovement.)
	parmMustNotReduceForecast	Gets or sets the MustNotReduceForecast parameter. (Inherited from InventMovement.)
	parmPDSBaseValue	Gets or sets the PDSBaseValue parameter. (Inherited from InventMovement.)
	parmPdsBatchAttribAutoRes	Gets or sets the PdsBatchAttribAutoRes parameter. (Inherited from InventMovement.)
	parmProjAdjustCorrection	Gets or sets the ProjAdjustCorrection parameter. (Inherited from InventMovement.)
	parmReleasedReservationQty	Gets or sets the ReleasedReservationQty parameter. (Inherited from InventMovement.)
	parmSalesPackingSlipJournalPostProj	Gets or sets the SalesPackingSlipJournalPostProj parameter. (Inherited from InventMovement.)
	parmStorno_RU	Gets or sets the Storno_RU parameter. (Inherited from InventMovement.)
	parmStornoPhysical_RU	(Inherited from InventMovement.)
	parmStornoPhysicalForced_RU	Gets or sets the StornoPhysicalForced_RU parameter. (Inherited from InventMovement.)
	pdsAdjustInventoryQuantity	Adds the inventory quantity on the InventJournalTrans record. (Inherited from InventMov_Transfer.)
	pdsAskSameLotResolution	Requests that the user determine how to resolve a same lot reservation issue. (Inherited from InventMovement.)
	pdsBaseAttributeValue	Gets the base attribute value for the current movement. (Inherited from InventMovement.)
	pdsCanHaveBatchInheritance	Gets a value indicating if the movement can trigger batch inheritance. (Inherited from InventMovement.)
	pdsCheckCopyBatchAttrib	Determines whether a batch attribute record exists. (Inherited from InventMovement.)
	pdsCheckReserveFromDim	Determines whether the movement can be reserved from the passed dimension. (Inherited from InventMovement.)
	pdsConsiderRestrictReservation	Indicates if the batch disposition functionality should be considered reservation. (Overrides the pdsConsiderRestrictReservation Method.)
	pdsCountryOfOrigin1	Gets the first country of origin. (Inherited from InventMovement.)
	pdsCountryOfOrigin2	Gets the second country of origin (Inherited from InventMovement.)
	pdsCWAddRemainFinancial	Adds a catch weight to the remaining financial quantity. (Inherited from InventMovement.)
	pdsCWAddRemainPhysical	Adds an amount to the catch weight remain physical quantity. (Overrides the pdsCWAddRemainPhysical Method.)
	pdsCWAutoReserveQty	Gets the catch weight auto reserve quantity. (Inherited from InventMovement.)
	pdsCWItem	This method returns true if the movement is for a catch weight item (Inherited from InventMovement.)
	pdsCWQtyPost	Calculates the total received catch weight quantity after an inventory update. (Inherited from InventMovement.)
	pdsCWRemainPhysical	Gets the catch weight remain physical quantity. (Overrides the pdsCWRemainPhysical Method.)
	pdsCWReserveMarkMin	Indicates whether the catch weight should reserve a minimum. (Inherited from InventMovement.)
	pdsCWReserveQty	Gets the catch weight reserve quantity. (Overrides the pdsCWReserveQty Method.)
	pdsCWSetRemainPhysical	Sets the catch weight remain physical quantity. (Overrides the pdsCWSetRemainPhysical Method.)
	pdsCWSetTransQty	Sets the catch weight transaction quantity. (Inherited from InventMov_Transfer.)
	pdsCWTransQty	Gets the catch weight transaction quantity. (Overrides the pdsCWTransQty Method.)
	pdsCWUnitId	Gets the catch weight unit ID. (Inherited from InventMovement.)
	pdsGetBaseValue	Gets the potency base value associated with the current inventory movement. (Inherited from InventMovement.)
	pdsIgnoreSerNumCtrlValidation	Indicates whether the movement should ignore the serial number control. (Inherited from InventMovement.)
	pdsInheritBatchData	Inherits information to the given InventBatch based on rules for the current type of movement and the transaction data. (Inherited from InventMovement.)
	pdsInitDim	Initializes the InventDim and InventDimParm records with the dimension of the movement. (Inherited from InventMovement.)
	pdsMustConsiderBatchAttrib	Determines whether batch attributes should be considered for reservations. (Inherited from InventMov_Transfer.)
	pdsOverrideFEFO	Gets a FEFO override. (Overrides the pdsOverrideFEFO Method.)
	pdsResolveSameLotReservation	Shows a dialog for fixing same lot reservation conflict or warns the user about existing reservation conflict. (Inherited from InventMovement.)
	pdsRestrictReservation	Indicates whether to block a reservation. (Overrides the pdsRestrictReservation Method.)
	pdsSameLotOverride	Overrides the same lot feature and sets it not to use this feature for this movement. (Inherited from InventMovement.)
	pdsSameLotReservation	Determines whether an inventory movement should be reserved against the same inventory batch. (Inherited from InventMovement.)
	pdsSameLotReservationBatch	Gets the batch the movement must be reserved against (Inherited from InventMovement.)
	pdsUpdateBufferWithAdjQtyUncommited	(Inherited from InventMovement.)
	pdsUpdateBufferWithAdjustedQuantity	Updates the document buffer after the inventory quantity adjustment. (Inherited from InventMovement.)
	pdsUseVendBatchDate	Indicates whether to use the vendor batch date. (Inherited from InventMovement.)
	pdsUseVendBatchExp	Indicates whether to use the vendor expiration date. (Inherited from InventMovement.)
	pdsVendBatchDate	Gets the vendor batch date. (Inherited from InventMovement.)
	pdsVendBatchId	Gets the vendor batch ID. (Inherited from InventMovement.)
	pdsVendBatchInfo	Gets the vendor batch details associated with this transaction. (Inherited from InventMovement.)
	pdsVendExpiryDate	Gets the vendor batch expiration date. (Inherited from InventMovement.)
	physicalUpdateIssueRemainQty_IN	Gets the physical update remaining quantity and the catch-weight physical update remaining quantity. (Inherited from InventMov_Transfer.)
	physicalUpdateReceiptRemainQty_IN	Gets the physical update remaining quantity and the catch-weight physical update remaining quantity. (Inherited from InventMov_Transfer.)
	pmfCheckUpdateInvent	Determines whether the current inventory movement can be inventory updated or not. (Inherited from InventMovement.)
	pmfSetMinMaxQty	Gets a quantity based on minimum and maximum quantities from the item setup. (Inherited from InventMovement.)
	postingBalanceSheet	(Inherited from InventMov_Transfer.)
	postingCharge	Determines the charge ledger posting type. (Inherited from InventMovement.)
	postingOffsetPhysical	(Inherited from InventMovement.)
	postingOperations	(Inherited from InventMov_Transfer.)
	postingPhysical	(Inherited from InventMovement.)
	postingPhysicalRevenue	(Inherited from InventMovement.)
	postingPhysicalRevenueOffset	(Inherited from InventMovement.)
	postingPhysicalTax	(Inherited from InventMovement.)
	postingStdLoss	(Inherited from InventMovement.)
	postingStdOffset	(Inherited from InventMovement.)
	postingStdProfit	(Inherited from InventMovement.)
	postingStockVariation	Determines the stock variation ledger posting type. (Inherited from InventMovement.)
	projAdjustRefId	(Inherited from InventMovement.)
	projCategoryId	(Inherited from InventMovement.)
	projId	(Inherited from InventMovement.)
	projLedgerOrigin	(Inherited from InventMovement.)
	projLinePropertyId	(Inherited from InventMovement.)
	projSalesCurrencyId	(Inherited from InventMovement.)
	projSalesPrice	(Inherited from InventMovement.)
	projTaxGroupId	(Inherited from InventMovement.)
	projTaxItemGroupId	(Inherited from InventMovement.)
	projTransactionOrigin	(Inherited from InventMovement.)
	projTransId	(Inherited from InventMovement.)
	projTransIdRef	(Inherited from InventMovement.)
	qtyPost	(Inherited from InventMovement.)
	quotationType	(Inherited from InventMovement.)
	registerBlankTrackingValueAsNotReadable	Determines whether the movement type considers the registration of a blank tracking dimension value as a not readable value. (Inherited from InventMovement.)
	relatedMovement	(Inherited from InventMovement.)
	remainFinancial	(Inherited from InventMovement.)
	remainFinancialUnit	(Inherited from InventMovement.)
	remainPhysical	Returns the quantity that remains to be shipped. (Overrides the remainPhysical Method.)
	remainPhysicalUnit	(Inherited from InventMovement.)
	reservationHierarchyLevelStrategyList	Retrieves a list containing WHSReservationHierarchyLevelStrategy instances for this movement. (Inherited from InventMovement.)
	reserveQty	Gets the reserve quantity. (Overrides the reserveQty Method.)
	returnedSpecialCheckUpdate_RU	(Inherited from InventMov_Transfer.)
	returnInventTransOrigin	Identifies the original transactions. (Inherited from InventMovement.)
	serialProdDate	(Inherited from InventMovement.)
	setInventDimId	Sets the inventory dimension ID of the InventTransferLine of this movement to the InventDimId that is passed as an argument. (Overrides the setInventDimId Method.)
	setInventRefFields	(Inherited from InventMovement.)
	setPreTransEstimated	(Inherited from InventMovement.)
	setProjAdjustRefId	(Inherited from InventMovement.)
	setQtyRemainReceive	Sets the remaining quantity to be received. (Inherited from InventMov_Transfer.)
	setQtyRemainShip	Sets the remaining quantity to be shipped. (Inherited from InventMov_Transfer.)
	setRemainPhysical	Sets the quantity that remains to be shipped to the quantity that is passed as an argument. (Overrides the setRemainPhysical Method.)
	setRemainPhysicalUnit	(Inherited from InventMovement.)
	setTimeOut	Sets up the scheduled execution of a specified method. (Inherited from Object.)
	setTransQty	(Inherited from InventMov_Transfer.)
	setTransQtyUnit	(Inherited from InventMovement.)
	shippingDateConfirmed	(Inherited from InventMovement.)
	shippingDateRequested	(Inherited from InventMovement.)
	storno_RU	(Inherited from InventMovement.)
	subDeliveryPct	(Inherited from InventMov_Transfer.)
	toString	Returns a string that represents the current object. (Inherited from Object.)
	transChildRefId	(Inherited from InventMovement.)
	transChildType	(Inherited from InventMovement.)
	transDate	Returns the shipdate of the InventTransferLine of this movement. (Overrides the transDate Method.)
	transferDirection	Retrieves the direction of the transfer movements. (Overrides the transferDirection Method.)
	transferInventTransOriginId	Retrieves the ID of a transfer counterpart inventory transaction originator that corresponds to the movement. (Overrides the transferInventTransOriginId Method.)
	transferIssueCostPriceInventDim	For a transfer issue the inventory dimension are returned. (Inherited from InventMov_Transfer.)
	transId	Returns the InventTransId of the InventTransferLine of this movement. (Overrides the transId Method.)
	transIdSum	(Inherited from InventMov_Transfer.)
	transIdSumTransId	(Inherited from InventMov_Transfer.)
	transInventRefType	(Inherited from InventMov_Transfer.)
	transQty	(Inherited from InventMov_Transfer.)
	transQtyUnit	(Inherited from InventMovement.)
	transRefId	(Inherited from InventMov_Transfer.)
	transSchedTime	(Inherited from InventMovement.)
	transSign	Returns the transSign that represents the direction of this transaction. (Overrides the transSign Method.)
	transType	Returns the InventTransType of this movement. (Overrides the transType Method.)
	transUnitId	(Inherited from InventMovement.)
	updateAutoDimLocationId	(Inherited from InventMovement.)
	updateAutoDimOwnerId_RU	(Inherited from InventMovement.)
	updateAutoEstimate	(Inherited from InventMovement.)
	updateAutoLossProfit	(Inherited from InventMovement.)
	updateAutoPhysical	(Inherited from InventMovement.)
	updateBuffer	Updates the movement buffer and optionally the reservation. (Inherited from InventMovement.)
	updateDoBuffer	(Inherited from InventMovement.)
	updateGoodsInRoute_RU	(Inherited from InventMovement.)
	updateInheritedBatchesPostRegistration	Updates the batches created for co-products and finished goods from the ingredients, based on the rules defined for lot inheritance. (Inherited from InventMovement.)
	updateLedgerAdjust	(Inherited from InventMovement.)
	updateLedgerAdjustSecCur_RU	(Inherited from InventMovement.)
	updateLedgerFinancial	(Inherited from InventMov_Transfer.)
	updateLedgerFinancialSecCur_RU	(Inherited from InventMovement.)
	updateLedgerPhysical	(Inherited from InventMovement.)
	updatePeggingRequirements	Updates the pegging requirements of the inventory movement. (Inherited from InventMovement.)
	updateReqExplodeReservation	(Inherited from InventMovement.)
	updateReservation	(Inherited from InventMovement.)
	updateSerialNumIssue	Verifies if a particular issue inventory transaction update can be done for a particular serial number, and creates a serial number if necessary. (Inherited from InventMovement.)
	updateSerialNumReceipt	Verifies if a particular receipt inventory transaction update can be done for a particular serial number, and creates a serial number if necessary. (Inherited from InventMovement.)
	usageCount	Returns the current number of references, that is, the value of the reference counter, that the object has. (Inherited from Object.)
	useEnteredPriceAsCost	(Inherited from InventMovement.)
	viewCacheInventTransOrigin	(Inherited from InventMovement.)
	wait	Pauses a process. (Inherited from Object.)
	whsMustConsiderBatchProcessing	Determines if special batch processing must be used during reservation. (Inherited from InventMovement.)
	whsUpdateAutoDimStatusId	For WHS controlled items with inventory status not set updates it with default value and returns true, otherwise returns false. (Inherited from InventMovement.)
	wmsShipmentGroupingRefId	Retrieves the grouping reference ID to be used with output orders. (Inherited from InventMovement.)
	wmsShipmentGroupingTransType	Retrieves the grouping transaction type to be used with output orders. (Inherited from InventMovement.)
	xml	Returns an XML string that represents the current object. (Inherited from Object.)
	::newFromInventTransferLine	Creates an instance of the InventMov_TransferFrom class based on the specified record.

Top

Remarks

When using transfer orders and inventory movements, the following four movements are created for each transfer order; that is, a TableNum::InventTransferLine record:

• InventMov_TransferFrom : issue transaction from warehouse.

• InventMov_TransferTransitTo : receipt transaction to transit warehouse.

• InventMov_TransferTransitFrom : issue transaction from transit warehouse.

• InventMov_TransferTo : receipt transaction to warehouse.

Inheritance Hierarchy

Object Class
  InventMovement Class
    InventMov_Transfer Class
      InventMov_TransferFrom Class