InventMov_Component_JP Class [AX 2012]
Inventory movement for assembling and disassembling entry.
Syntax
class InventMov_Component_JP extends InventMovement
Run On
Called
Methods
Method | Description | |
---|---|---|
accountBalanceAutoLossProfit | Changes an account based on the InventIssue enumeration value to the InventIssueFA enumeration value when a fixed asset is set. (Inherited from InventMovement.) | |
accountBalanceSheet | Gets account for balance sheet. (Overrides the accountBalanceSheet Method.) | |
accountCharge | Determines the charge ledger account. (Inherited from InventMovement.) | |
accountOperations | Gets operation account. (Overrides the accountOperations Method.) | |
accountOperationsAutoLossProfit | (Inherited from InventMovement.) | |
accountPhysical | (Inherited from InventMovement.) | |
accountPhysicalRevenue | (Inherited from InventMovement.) | |
accountPhysicalRevenueOffset | (Inherited from InventMovement.) | |
accountPhysicalTax | (Inherited from InventMovement.) | |
accountStdLoss | (Inherited from InventMovement.) | |
accountStdOffset | (Inherited from InventMovement.) | |
accountStdProfit | (Inherited from InventMovement.) | |
accountStockVariation | Determines the stock variation ledger account. (Inherited from InventMovement.) | |
activityNumber | (Inherited from InventMovement.) | |
addRemainFinancialUnit | (Inherited from InventMovement.) | |
addRemainPhysical | (Inherited from InventMovement.) | |
addRemainPhysicalUnit | (Inherited from InventMovement.) | |
adjustInventDimReservationCriteria | Adjust the inventDimCriteria for reservation. (Inherited from InventMovement.) | |
adjustmentMovement | Specifies whether movements are created as adjustments to previous transactions. (Inherited from InventMovement.) | |
adjustToFixedReceiptPrice | Returns whether a receipt should be adjusted to fixed receipt price. (Inherited from InventMovement.) | |
adjustTransactionInventDimEstimated | Creates an inventDim based on the movement inventDim and adjusts it as needed to be used on the estimated inventTrans. (Inherited from InventMovement.) | |
allowNegativePhysicalForBlockingStatus | Determines if validation should allow a negative physical available quantity for inventory status blocking. (Inherited from InventMovement.) | |
assemblyInventTransOriginId | Retrieves the ID of the assembly inventory transaction originator that corresponds to the movement. (Inherited from InventMovement.) | |
assetBookId | (Inherited from InventMovement.) | |
assetId | (Inherited from InventMovement.) | |
assetTransType | Gets the asset transaction type. | |
autoLossProfitInventMovVirtuel | (Inherited from InventMovement.) | |
autoReserveQty | (Inherited from InventMovement.) | |
batchDispReservationBlockedFieldId | Gets the field ID of the PdsDispositionMaster table for reservation blocking control field for the type of movement. (Inherited from InventMovement.) | |
batchExpDate | (Inherited from InventMovement.) | |
batchProdDate | (Inherited from InventMovement.) | |
buffer | (Inherited from InventMovement.) | |
cacheAccountOperations | Gets or sets the operation account. | |
calcEstimatedUnit | (Inherited from InventMovement.) | |
calculateIndirectCost | Calculates the indirect cost that is related to the movement. (Inherited from InventMovement.) | |
canBeAutoRepAsFinished | Determines whether the movement can be reported as finished automatically. (Overrides the canBeAutoRepAsFinished Method.) | |
canBeOnAllInventLocations | Determines wheather the movement can be on all warehouses. (Overrides the canBeOnAllInventLocations Method.) | |
canBeOnAllInventSites | Determines whether an inventory movement can involve all related sites. (Inherited from InventMovement.) | |
canBeOnSupermarket | Indicates whether a movement can have an InventDimId value that represents a kanban supermarket. (Inherited from InventMovement.) | |
canBeReserved | Indicates whether the InventMovement instance, such as a salesLine, can be reserved. (Inherited from InventMovement.) | |
canBeUpdatedEstimated | (Inherited from InventMovement.) | |
canBeUpdatedFinancial | (Inherited from InventMovement.) | |
canBeUpdatedPhysical | (Inherited from InventMovement.) | |
canBeUpdatedPicked | (Inherited from InventMovement.) | |
canBeUpdatedRegistered | (Inherited from InventMovement.) | |
cancelTimeOut | Cancels a previous method call to the setTimeOut method. (Inherited from Object.) | |
canChangeConsistentDim | Checks whether consistent dimensions can be modified. (Inherited from InventMovement.) | |
canChangeStorageConsistentDimWhenFinUpd | Specifies whether consistent storage dimensions may be changed when inventory transactions are financially updated. (Inherited from InventMovement.) | |
canCommittedCostBeReversed | (Inherited from InventMovement.) | |
canCostValuebeChanged | (Inherited from InventMovement.) | |
canHaveReservedWork | Determines if the movement type can have WHS work created that takes over reserving the lower levels of the hierarchy. (Inherited from InventMovement.) | |
canInventTransBeFinancialUpdated | (Inherited from InventMovement.) | |
canInventTransBePhysicalUpdated | Verifies whether an inventory transaction can be physically updated. (Inherited from InventMovement.) | |
canReservationFormBeEdited | (Inherited from InventMovement.) | |
canReservationFormBeShown | (Inherited from InventMovement.) | |
canUpdateInventStatusBlocking | Determines if the movment can update inventory status blocking transactions (Inherited from InventMovement.) | |
canUpdateOnHandDatePhysicalOnReturn | Determines whether the physical date of on-hand inventory can be updated when items are returned. (Inherited from InventMovement.) | |
caseTagging | (Inherited from InventMovement.) | |
checkAllowManualMarking | (Inherited from InventMovement.) | |
checkCountingLocks | (Inherited from InventMovement.) | |
checkDimFieldsValid | Validate that the specified inventory dimensions are valid. (Inherited from InventMovement.) | |
checkDimInventOwnerId_RU | (Inherited from InventMovement.) | |
checkDimPhysical | Validates the physical dimensions of a given InventDim table buffer for the current movement. (Inherited from InventMovement.) | |
checkInventDimForInventDimField | Validates the physical dimensions of a given InventDim table buffer for the passed InventDim table field. (Inherited from InventMovement.) | |
checkInventSiteDimension | Validates the used inventory dimensions against the used financial dimensions. (Inherited from InventMovement.) | |
checkLocationBlocking | (Inherited from InventMovement.) | |
checkNotOverDelivery | Verify whether the movement quantities cause overdelivery. (Inherited from InventMovement.) | |
checkNotSubDelivery | (Inherited from InventMovement.) | |
checkProfileOwner_RU | (Inherited from InventMovement.) | |
checkUpdateArrived | (Inherited from InventMovement.) | |
checkUpdateChildReference | (Inherited from InventMovement.) | |
checkUpdateEstimated | (Inherited from InventMovement.) | |
checkUpdateEstimatedMovement | Indicates whether the estimated transactions value must be updated. (Inherited from InventMovement.) | |
checkUpdateFinancial | (Inherited from InventMovement.) | |
checkUpdatePhysical | (Inherited from InventMovement.) | |
checkUpdatePicked | (Inherited from InventMovement.) | |
checkUpdateRegistered | (Inherited from InventMovement.) | |
checkUpdateReservation | Validates the used inventory movement against an inventory update reservation. (Inherited from InventMovement.) | |
checkUpdateStandard | (Inherited from InventMovement.) | |
checkWHSLoadLineInventTransConsistency | Validates that the WHSLoadLine loadlines related to the source line is in sync with the inventory transactions. (Inherited from InventMovement.) | |
checkWMSLocation | Checks the InventDim.WMSLocationId field of the inventory dimensions of the movement. (Inherited from InventMovement.) | |
childBuffer | (Inherited from InventMovement.) | |
clearInventRefFields | Sets reference fields based on owner so that they do not reference anything. (Inherited from InventMovement.) | |
correctionSwapOnItem_RU | Indicates whether the correction flag should be swapped or not (Inherited from InventMovement.) | |
costValueChanged | (Inherited from InventMovement.) | |
createInventTransPosting | (Inherited from InventMovement.) | |
createOriginOwnerRelationship | Creates the relationship between the inventory transactions originator and the owner. (Overrides the createOriginOwnerRelationship Method.) | |
createQuarantineOrder | (Inherited from InventMovement.) | |
custVendAc | (Inherited from InventMovement.) | |
defaultDimension | Generates the set of financial dimensions to use when posting the scrap. (Overrides the defaultDimension Method.) | |
deleteOriginOwnerRelationship | Deletes the relationship between the inventory transactions originator and the owner. (Inherited from InventMovement.) | |
deliveryPostalAddress | Identifies the postal delivery address of the inventory movement. (Inherited from InventMovement.) | |
dimAllowBlankIssue | (Inherited from InventMovement.) | |
dimAllowBlankReceipt | (Inherited from InventMovement.) | |
dimParmRelatedUpdate | (Inherited from InventMovement.) | |
dirParty | Retrieves the party ID of the customer or vendor that is related to the movement. (Inherited from InventMovement.) | |
dlvMode | (Inherited from InventMovement.) | |
dlvTerm | (Inherited from InventMovement.) | |
doScrap | (Inherited from InventMovement.) | |
doSumUp | Sums inventory transactions related to current inventory movement. (Inherited from InventMovement.) | |
ecoResProductDimGroupSetup | Retrieves an instance of the EcoResProductDimGroupSetup class that controls how product dimensions are configured for this movement. (Inherited from InventMovement.) | |
enforceSerialDimensionQuantityControl | Determines whether the movement type enforces a quantity of 1.0 for serial control. (Inherited from InventMovement.) | |
enteredPcsPrice | (Inherited from InventMovement.) | |
equal | Determines whether the specified object is equal to the current one. (Inherited from Object.) | |
estimatedFinancialValue | (Inherited from InventMovement.) | |
estimatedFinancialValueSecCur_RU | (Inherited from InventMovement.) | |
estimatedPhysicalRevenue | (Inherited from InventMovement.) | |
estimatedPhysicalTax | (Inherited from InventMovement.) | |
estimatedPhysicalValue | Get the estimated physical value for an inventory transaction. (Inherited from InventMovement.) | |
estimatedPhysicalValuePublic | Gets the estimated physical value of an inventory transaction. (Inherited from InventMovement.) | |
estimatedPhysicalValueSecCur_RU | Get the estimated physical value in reporting currency for an inventory transaction. (Inherited from InventMovement.) | |
estimatedPhysicalValueSecCurPublic_RU | Get the estimated physical value in reporting currency for an inventory transaction. (Inherited from InventMovement.) | |
financialIssueCostValue | (Inherited from InventMovement.) | |
financialIssueCostValueSecCur_RU | (Inherited from InventMovement.) | |
financialUpdateReceiptQty_IN | Gets financial update receipt qty and CW financial update receipt qty (Inherited from InventMovement.) | |
forceReturnLotInInventTrans_RU | Specifies whether a Return lot will be write down to the inventory transaction against a common rules. (Inherited from InventMovement.) | |
freightSlipType | (Inherited from InventMovement.) | |
freightZone | (Inherited from InventMovement.) | |
getExpiryCheckDate | Gets the date against which to check the expiry date of an inventory batch. (Inherited from InventMovement.) | |
getInventDimForIssueTransFromReceipt | Returns the InventDim that should be put on the issue transaction during a receipt which updates the issue transaction for WHS items. (Inherited from InventMovement.) | |
getInventDimForReservedTransPhysChange | Returns the InventDim that should be put on the transaction when reservation status is updated from ordered to physical. (Inherited from InventMovement.) | |
getModuleType_CN | Gets the value of module type. (Inherited from InventMovement.) | |
getQtyPreForNotOverDeliveryCheck_IN | Gets the pre-post trans Qty of current inventory transaction (Inherited from InventMovement.) | |
getTimeOutTimerHandle | Returns the timer handle for the object. (Inherited from Object.) | |
handle | Retrieves the handle of the class of the object. (Inherited from Object.) | |
hasBestBeforeDateLimit | (Inherited from InventMovement.) | |
hasExpiryDateLimit | (Inherited from InventMovement.) | |
hasVirtualTransactions | (Inherited from InventMovement.) | |
initDimParmAutoReserv | (Inherited from InventMovement.) | |
initForAutoReservation | Initializes the movement for auto reservation. (Inherited from InventMovement.) | |
initInventTransFinancial | (Inherited from InventMovement.) | |
initInventTransFromBuffer | (Inherited from InventMovement.) | |
initInventTransPhysical | (Inherited from InventMovement.) | |
initInventTransPicked | (Inherited from InventMovement.) | |
initWMSOrder | Initialize a WMSOrder record. (Inherited from InventMovement.) | |
insertChildBuffer | (Inherited from InventMovement.) | |
interCompanyMarkingAllowed | (Inherited from InventMovement.) | |
interCompanyMovement | (Inherited from InventMovement.) | |
interCompanyTransaction | (Inherited from InventMovement.) | |
inventCostIndirectFinancial | Retrieves an InventCostIndirectFinancial object. (Inherited from InventMovement.) | |
inventCostIndirectPhysical | Retrieves a InventCostIndirectPhysical object. (Inherited from InventMovement.) | |
inventdim | (Inherited from InventMovement.) | |
inventDimGroupSetup | Retrieves an instance of the InventDimGroupSetup class that controls how inventory dimensions are configured for this movement. (Inherited from InventMovement.) | |
inventDimId | Gets the invent dimension Id. (Overrides the inventDimId Method.) | |
inventDimIdTransferIssue | Returns an InventDimId Id for the issue transactions that corresponds to a receipt. (Inherited from InventMovement.) | |
inventDimMerged | (Inherited from InventMovement.) | |
inventDimParmMatchTransferTrans | Retrieves an InventDimParm buffer which should be used when finding related InventTrans records. (Inherited from InventMovement.) | |
inventItemInventSetup | Retrieves an InventItemInventSetup buffer. (Inherited from InventMovement.) | |
inventItemOrderCheckNotStopped | Checks if the item in question is stopped in the inventory. (Inherited from InventMovement.) | |
inventItemOrderSetupMap | Retrieves an InventItemOrderSetupMap table map. (Inherited from InventMovement.) | |
inventLocationId | (Inherited from InventMovement.) | |
inventModelGroup | (Inherited from InventMovement.) | |
inventModelType | (Inherited from InventMovement.) | |
inventModelTypeSecCur_RU | (Inherited from InventMovement.) | |
inventMovSubType | (Inherited from InventMovement.) | |
inventSiteId | (Inherited from InventMovement.) | |
inventTable | (Inherited from InventMovement.) | |
inventTableInvent | (Inherited from InventMovement.) | |
inventTransOriginId | Sets or retrieves the ID of the inventory transaction originator that corresponds to the movement. (Inherited from InventMovement.) | |
inventTransOriginTransferId | Gets the ID of the inventory transaction originator that corresponds to the movement. (Inherited from InventMovement.) | |
isItemWHSEnabled | Determines if the item for this movement is enabled for using the WHS system. (Inherited from InventMovement.) | |
isPrimaryMovement | (Inherited from InventMovement.) | |
isProjTransCorrection | Indicates whether the project transaction should be marked as correction or not. (Inherited from InventMovement.) | |
isReturned | Determines whether the movement represents a return. (Inherited from InventMovement.) | |
isStorageDimensionOnlyTransfer | Indicates whether the movement operates only with the storage dimensions during transfers. (Inherited from InventMovement.) | |
isTransfer | (Inherited from InventMovement.) | |
isVirtuel | (Inherited from InventMovement.) | |
itemDescription | (Inherited from InventMovement.) | |
itemGroupId | Retrieves an item group ID of the item related to this movement. (Inherited from InventMovement.) | |
itemId | Gets the item Id. (Overrides the itemId Method.) | |
itemTagging | (Inherited from InventMovement.) | |
markingInventDimParmFixed | Fills an InventDimParm buffer with values that specify which dimensions are fixed when marking is applied. (Inherited from InventMovement.) | |
markingPreferPhysical | Determines whether the physically updated transactions are preferred over expected when finding transactions for marking. (Inherited from InventMovement.) | |
markingRefInventTransOrigin | Returns the ID of the marked transaction origin. (Inherited from InventMovement.) | |
mayScrapBeExpected | (Inherited from InventMovement.) | |
mcrReserveQty | Calculates the quantity to reserve. (Inherited from InventMovement.) | |
mcrSetInventDeliverNow | Sets the deliver now quantity. (Inherited from InventMovement.) | |
mcrSetReservation | Sets the quantity to be reserved. (Inherited from InventMovement.) | |
mcrSetSalesDeliverNow | Sets the deliver now quantity. (Inherited from InventMovement.) | |
mcrUpdateDetailedStatus | Updates the sales or purchase order detailed status. (Inherited from InventMovement.) | |
mergeTransDimTransferReceipt | (Inherited from InventMovement.) | |
minAllowedBestBeforeDate | (Inherited from InventMovement.) | |
minAllowedExpiryDate | (Inherited from InventMovement.) | |
moduleType | (Inherited from InventMovement.) | |
mustAggregateExpectedTransactions | Determines whether the expected transactions related to this movement must be aggregated. (Inherited from InventMovement.) | |
mustBeAutoReserved | Determines whether the inventMovement object must be auto-reserved. (Overrides the mustBeAutoReserved Method.) | |
mustBeBookedBalanceSheet | (Inherited from InventMovement.) | |
mustBeBookedCharge | Determines if charges must be booked. (Inherited from InventMovement.) | |
mustBeBookedFinancially | (Inherited from InventMovement.) | |
mustBeBookedOnhand | (Inherited from InventMovement.) | |
mustBeBookedOnhandSecCur_RU | (Inherited from InventMovement.) | |
mustBeBookedOperations | (Inherited from InventMovement.) | |
mustBeBookedPhysically | This method returns flag if the movement needs to be post physically. (Overrides the mustBeBookedPhysically Method.) | |
mustBeBookedPhysicalRevenue | (Inherited from InventMovement.) | |
mustBeBookedPhysicalTax | (Inherited from InventMovement.) | |
mustBeCostControlled | (Inherited from InventMovement.) | |
mustBeDeducted | Determines whether model group associated with current InventMovement object requires mandatory deduct. (Inherited from InventMovement.) | |
mustBeExpectedAgain | (Inherited from InventMovement.) | |
mustBePicked | Determines whether the transactions related to this movement must be picked. (Inherited from InventMovement.) | |
mustBeQuarantineControlled | Indicates whether the quarantine control is required. (Overrides the mustBeQuarantineControlled Method.) | |
mustBeQuotationControlled | (Inherited from InventMovement.) | |
mustBeReceived | Determines whether the model group associated with the current InventMovement object must be received. (Inherited from InventMovement.) | |
mustBeRegistered | Determines whether the transactions that are related to this movement must be registered. (Inherited from InventMovement.) | |
mustBeRemainControlled | (Inherited from InventMovement.) | |
mustBeSameTransSign | Determines whether all inventory transactions for this movement must have the same sign. (Overrides the mustBeSameTransSign Method.) | |
mustBeUnitControlled | (Inherited from InventMovement.) | |
mustBeUpdatedExpected | (Inherited from InventMovement.) | |
mustBeWMSOrderControlled | (Inherited from InventMovement.) | |
mustCheckLocationBlocking | (Inherited from InventMovement.) | |
mustCheckOverDelivery | Determines whether the current InventMovement object requires checking for over delivery. (Inherited from InventMovement.) | |
mustCheckOverDeliveryForQty | Determines whether the current InventMovement object requires checking for over delivery for the specified quantity. (Inherited from InventMovement.) | |
mustClearChildRef | (Inherited from InventMovement.) | |
mustCreateQuarantineOrder | (Inherited from InventMovement.) | |
mustDoAutoLossProfitEstimate | (Inherited from InventMovement.) | |
mustDoAutoLossProfitFinancial | (Inherited from InventMovement.) | |
mustDoAutoLossProfitPhysical | (Inherited from InventMovement.) | |
mustDoProjPhysicalAdjust | (Inherited from InventMovement.) | |
mustDoProjPhysicalPosting | (Inherited from InventMovement.) | |
mustDoProjPosting | (Inherited from InventMovement.) | |
mustPhysicallyUnreserveBlocking | For inventory blocking unreservation, determines whether physical inventory reservation must be removed. (Inherited from InventMovement.) | |
mustRegisterTrackingDimension | Determines whether the movement type supports inventory tracking (Inherited from InventMovement.) | |
mustReserveBasedOnMarkingOnCreation | Determines if issue transactions need to be reserved because of marking during creation. (Inherited from InventMovement.) | |
mustSetProjAdjRefInventTrans | (Inherited from InventMovement.) | |
mustSetProjAdjustRefInventTrans | (Inherited from InventMovement.) | |
mustShowMarkingWarningOnUpdate | Determines if a warning message is shown if marking cannot be updated according to dimensions. (Inherited from InventMovement.) | |
mustUpdateBatchAttribValues | Determines whether the movement should update the batch attributes on the related quality orders. (Inherited from InventMovement.) | |
mustUpdateGeneralJournal | Gets a value that indicates whether to post the inventory movement to the general journal. (Inherited from InventMovement.) | |
mustUpdateInventTableCostPrice | Determines whether the movement can update the cost price on the related inventtable. (Inherited from InventMovement.) | |
mustUpdateInventTransFields | Determines if the movement can update the fields of the related InventTrans. (Inherited from InventMovement.) | |
mustUpdateInventTransOriginFields | (Inherited from InventMovement.) | |
mustUpdateRelatedTrans | (Inherited from InventMovement.) | |
mustUseParentMovToDimTransferReceipt | (Inherited from InventMovement.) | |
mustValidatePalletLocation | Determines if pallet location must be validated during put away for the current movement. (Inherited from InventMovement.) | |
needsShelfLifeCheck | (Inherited from InventMovement.) | |
new | Creates a new instance of InventMov_Component_JP class. (Overrides the new Method.) | |
newMovement_Orig | Initializes a new instance of the InventMovement class that is based on the original record of AssetComponent_JP record. (Overrides the newMovement_Orig Method.) | |
newMovement_TransferIssue | (Inherited from InventMovement.) | |
newMovement_TransferIssueReceive | (Inherited from InventMovement.) | |
newMovement_TransferReceipt | (Inherited from InventMovement.) | |
newMovement_TransferReceiptShip | (Inherited from InventMovement.) | |
notify | Releases the hold on an object that has called the wait method on this object. (Inherited from Object.) | |
notifyAll | Releases a lock on the object that was issued by the wait method on this object. (Inherited from Object.) | |
objectOnServer | Determines whether the object is on a server. (Inherited from Object.) | |
offsetAccountPhysical | (Inherited from InventMovement.) | |
onlyCheckStorageDimInConsistentCheck | Specifies whether to check only storage dimensions when you verify whether consistent dimensions can be changed. (Inherited from InventMovement.) | |
overDeliveryPct | (Inherited from InventMovement.) | |
owner | Returns the instance that owns the object. (Inherited from Object.) | |
palletTagging | (Inherited from InventMovement.) | |
parentMovement | (Inherited from InventMovement.) | |
parmBurdenItem | This method gets/sets if the movement is a burden item (Inherited from InventMovement.) | |
parmCustomsLoadOnInventory_IN | Gets or sets the CustomsLoadOnInventory_IN parameter. (Inherited from InventMovement.) | |
parmCustomsLoadOnInventoryMST_IN | Gets or sets the CustomsLoadOnInventoryMST_IN parameter. (Inherited from InventMovement.) | |
parmDistributionLedgerPosting | Gets or sets the DistributionLedgerPosting parameter. (Inherited from InventMovement.) | |
parmExchangeRateDate | Gets or sets the ExchangeRateDate parameter. (Inherited from InventMovement.) | |
parmGoodsInRoute_RU | Gets or sets the GoodsInRoute_RU parameter. (Inherited from InventMovement.) | |
parmIndirectCostAmount_RU | Gets or sets the IndirectCostAmount_RU parameter. (Inherited from InventMovement.) | |
parmIndirectCostAmountSecCur_RU | Gets or sets the IndirectCostAmountSecCur_RU parameter. (Inherited from InventMovement.) | |
parmInventCostTransVarianceList | Gets or sets the InventCostTransVarianceList parameter. (Inherited from InventMovement.) | |
parmInventParmID_IN | Gets and sets the Parm ID of the InventTransferParmLine Table (Inherited from InventMovement.) | |
parmInventRefTransId_RU | Gets or sets the InventRefTransId_RU parameter. (Inherited from InventMovement.) | |
parmInventTransIdDelivery_RU | Gets or sets the InventTransIdDelivery_RU parameter. (Inherited from InventMovement.) | |
parmInventTransIdTransit_RU | Gets or sets the InventTransIdTransit_RU parameter. (Inherited from InventMovement.) | |
parmInventTransOriginIdRef_virtuel | Gets or sets the InventTransOriginIdRef_virtuel parameter. (Inherited from InventMovement.) | |
parmMarkingRefInventTransOrigin_RU | Gets or sets the MarkingRefInventTransOrigin_RU parameter. (Inherited from InventMovement.) | |
parmMCRInventTransRecid | Gets or sets the MCRInventTransRecid parameter. (Inherited from InventMovement.) | |
parmMustBeQuarantineControled | Gets or sets the MustBeQuarantineControled parameter. (Inherited from InventMovement.) | |
parmMustDoAutoLossProfitForbid | Gets or sets the MustDoAutoLossProfitForbid parameter. (Inherited from InventMovement.) | |
parmMustNotReduceForecast | Gets or sets the MustNotReduceForecast parameter. (Inherited from InventMovement.) | |
parmPDSBaseValue | Gets or sets the PDSBaseValue parameter. (Inherited from InventMovement.) | |
parmPdsBatchAttribAutoRes | Gets or sets the PdsBatchAttribAutoRes parameter. (Inherited from InventMovement.) | |
parmProjAdjustCorrection | Gets or sets the ProjAdjustCorrection parameter. (Inherited from InventMovement.) | |
parmReleasedReservationQty | Gets or sets the ReleasedReservationQty parameter. (Inherited from InventMovement.) | |
parmSalesPackingSlipJournalPostProj | Gets or sets the SalesPackingSlipJournalPostProj parameter. (Inherited from InventMovement.) | |
parmStorno_RU | Gets or sets the Storno_RU parameter. (Inherited from InventMovement.) | |
parmStornoPhysical_RU | (Inherited from InventMovement.) | |
parmStornoPhysicalForced_RU | Gets or sets the StornoPhysicalForced_RU parameter. (Inherited from InventMovement.) | |
pdsAdjustInventoryQuantity | Adjusts the inventory quantity for the movement. (Inherited from InventMovement.) | |
pdsAskSameLotResolution | Requests that the user determine how to resolve a same lot reservation issue. (Inherited from InventMovement.) | |
pdsBaseAttributeValue | Gets the base attribute value for the current movement. (Inherited from InventMovement.) | |
pdsCanHaveBatchInheritance | Gets a value indicating if the movement can trigger batch inheritance. (Inherited from InventMovement.) | |
pdsCheckCopyBatchAttrib | Determines whether a batch attribute record exists. (Inherited from InventMovement.) | |
pdsCheckReserveFromDim | Determines whether the movement can be reserved from the passed dimension. (Inherited from InventMovement.) | |
pdsConsiderRestrictReservation | Indicates if the batch disposition functionality should be considered reservation. (Inherited from InventMovement.) | |
pdsCountryOfOrigin1 | Gets the first country of origin. (Inherited from InventMovement.) | |
pdsCountryOfOrigin2 | Gets the second country of origin (Inherited from InventMovement.) | |
pdsCWAddRemainFinancial | Adds a catch weight to the remaining financial quantity. (Inherited from InventMovement.) | |
pdsCWAddRemainPhysical | Adds a catch weight quantity to the remaining physical quantity. (Inherited from InventMovement.) | |
pdsCWAutoReserveQty | Gets the catch weight auto reserve quantity. (Inherited from InventMovement.) | |
pdsCWItem | This method returns true if the movement is for a catch weight item (Inherited from InventMovement.) | |
pdsCWQtyPost | Calculates the total received catch weight quantity after an inventory update. (Inherited from InventMovement.) | |
pdsCWRemainPhysical | Gets the catch weight remaining physical quantity. (Inherited from InventMovement.) | |
pdsCWReserveMarkMin | Indicates whether the catch weight should reserve a minimum. (Inherited from InventMovement.) | |
pdsCWReserveQty | Gets the catch weight reserve quantity. (Inherited from InventMovement.) | |
pdsCWSetRemainPhysical | Sets the catch weight remain physical quantity. (Inherited from InventMovement.) | |
pdsCWSetTransQty | Sets the catch weight transaction quantity. (Inherited from InventMovement.) | |
pdsCWTransQty | Gets the catch weight transaction quantity. (Inherited from InventMovement.) | |
pdsCWUnitId | Gets the catch weight unit ID. (Inherited from InventMovement.) | |
pdsGetBaseValue | Gets the potency base value associated with the current inventory movement. (Inherited from InventMovement.) | |
pdsIgnoreSerNumCtrlValidation | Indicates whether the movement should ignore the serial number control. (Inherited from InventMovement.) | |
pdsInheritBatchData | Inherits information to the given InventBatch based on rules for the current type of movement and the transaction data. (Inherited from InventMovement.) | |
pdsInitDim | Initializes the InventDim and InventDimParm records with the dimension of the movement. (Inherited from InventMovement.) | |
pdsMustConsiderBatchAttrib | Indicates whether the batch attributes should be considered for reservation. (Inherited from InventMovement.) | |
pdsOverrideFEFO | Determines whether the movement should use FEFO logic. (Inherited from InventMovement.) | |
pdsResolveSameLotReservation | Shows a dialog for fixing same lot reservation conflict or warns the user about existing reservation conflict. (Inherited from InventMovement.) | |
pdsRestrictReservation | Indicates whether to block reservation. (Inherited from InventMovement.) | |
pdsSameLotOverride | Overrides the same lot feature and sets it not to use this feature for this movement. (Inherited from InventMovement.) | |
pdsSameLotReservation | Determines whether an inventory movement should be reserved against the same inventory batch. (Inherited from InventMovement.) | |
pdsSameLotReservationBatch | Gets the batch the movement must be reserved against (Inherited from InventMovement.) | |
pdsUpdateBufferWithAdjQtyUncommited | (Inherited from InventMovement.) | |
pdsUpdateBufferWithAdjustedQuantity | Updates the document buffer after the inventory quantity adjustment. (Inherited from InventMovement.) | |
pdsUseVendBatchDate | Indicates whether to use the vendor batch date. (Inherited from InventMovement.) | |
pdsUseVendBatchExp | Indicates whether to use the vendor expiration date. (Inherited from InventMovement.) | |
pdsVendBatchDate | Gets the vendor batch date. (Inherited from InventMovement.) | |
pdsVendBatchId | Gets the vendor batch ID. (Inherited from InventMovement.) | |
pdsVendBatchInfo | Gets the vendor batch details associated with this transaction. (Inherited from InventMovement.) | |
pdsVendExpiryDate | Gets the vendor batch expiration date. (Inherited from InventMovement.) | |
physicalUpdateIssueRemainQty_IN | Gets physical update remain qty and CW physical update remain qty (Inherited from InventMovement.) | |
physicalUpdateReceiptRemainQty_IN | Gets physical update remain qty and CW physical update remain qty (Inherited from InventMovement.) | |
pmfCheckUpdateInvent | Determines whether the current inventory movement can be inventory updated or not. (Inherited from InventMovement.) | |
pmfSetMinMaxQty | Gets a quantity based on minimum and maximum quantities from the item setup. (Inherited from InventMovement.) | |
postingBalanceSheet | Determines the balance sheet ledger posting type for the movement. (Overrides the postingBalanceSheet Method.) | |
postingCharge | Determines the charge ledger posting type. (Inherited from InventMovement.) | |
postingOffsetPhysical | (Inherited from InventMovement.) | |
postingOperations | Determines the operations ledger posting type for the movement. (Overrides the postingOperations Method.) | |
postingPhysical | (Inherited from InventMovement.) | |
postingPhysicalRevenue | (Inherited from InventMovement.) | |
postingPhysicalRevenueOffset | (Inherited from InventMovement.) | |
postingPhysicalTax | (Inherited from InventMovement.) | |
postingStdLoss | (Inherited from InventMovement.) | |
postingStdOffset | (Inherited from InventMovement.) | |
postingStdProfit | (Inherited from InventMovement.) | |
postingStockVariation | Determines the stock variation ledger posting type. (Inherited from InventMovement.) | |
projAdjustRefId | (Inherited from InventMovement.) | |
projCategoryId | (Inherited from InventMovement.) | |
projId | (Inherited from InventMovement.) | |
projLedgerOrigin | (Inherited from InventMovement.) | |
projLinePropertyId | (Inherited from InventMovement.) | |
projSalesCurrencyId | (Inherited from InventMovement.) | |
projSalesPrice | (Inherited from InventMovement.) | |
projTaxGroupId | (Inherited from InventMovement.) | |
projTaxItemGroupId | (Inherited from InventMovement.) | |
projTransactionOrigin | (Inherited from InventMovement.) | |
projTransId | (Inherited from InventMovement.) | |
projTransIdRef | (Inherited from InventMovement.) | |
qtyPost | (Inherited from InventMovement.) | |
quotationType | (Inherited from InventMovement.) | |
registerBlankTrackingValueAsNotReadable | Determines whether the movement type considers the registration of a blank tracking dimension value as a not readable value. (Inherited from InventMovement.) | |
relatedMovement | (Inherited from InventMovement.) | |
remainFinancial | (Inherited from InventMovement.) | |
remainFinancialUnit | (Inherited from InventMovement.) | |
remainPhysical | Retrieves the remaining physical quantity. (Overrides the remainPhysical Method.) | |
remainPhysicalUnit | (Inherited from InventMovement.) | |
reservationHierarchyLevelStrategyList | Retrieves a list containing WHSReservationHierarchyLevelStrategy instances for this movement. (Inherited from InventMovement.) | |
reserveQty | Retrieves the remaining physical quantity. (Overrides the reserveQty Method.) | |
returnedSpecialCheckUpdate_RU | (Inherited from InventMovement.) | |
returnInventTransOrigin | Identifies the original transactions. (Inherited from InventMovement.) | |
serialProdDate | (Inherited from InventMovement.) | |
setInventDimId | (Inherited from InventMovement.) | |
setInventRefFields | (Inherited from InventMovement.) | |
setPreTransEstimated | (Inherited from InventMovement.) | |
setProjAdjustRefId | (Inherited from InventMovement.) | |
setRemainPhysical | (Inherited from InventMovement.) | |
setRemainPhysicalUnit | (Inherited from InventMovement.) | |
setTimeOut | Sets up the scheduled execution of a specified method. (Inherited from Object.) | |
setTransQty | Sets the transaction quantity in the AssetComponent_JP table. (Overrides the setTransQty Method.) | |
setTransQtyUnit | (Inherited from InventMovement.) | |
shippingDateConfirmed | (Inherited from InventMovement.) | |
shippingDateRequested | (Inherited from InventMovement.) | |
storno_RU | (Inherited from InventMovement.) | |
subDeliveryPct | (Inherited from InventMovement.) | |
toString | Returns a string that represents the current object. (Inherited from Object.) | |
transChildRefId | (Inherited from InventMovement.) | |
transChildType | (Inherited from InventMovement.) | |
transDate | Retrieves the transaction date for the movement. (Overrides the transDate Method.) | |
transferDirection | Retrieves the direction of the transfer movements. (Inherited from InventMovement.) | |
transferInventTransOriginId | Retrieves an ID of transfer counterpart inventory transaction originator that corresponds to the movement. (Inherited from InventMovement.) | |
transferIssueCostPriceInventDim | For a transfer issue the inventory dimension are returned. (Inherited from InventMovement.) | |
transId | Retrieves the issue transaction ID from the AssetComponent_JP table. (Overrides the transId Method.) | |
transIdSum | (Inherited from InventMovement.) | |
transIdSumTransId | (Inherited from InventMovement.) | |
transInventRefType | (Inherited from InventMovement.) | |
transQty | Retrieves the inventory transaction quantity. (Overrides the transQty Method.) | |
transQtyUnit | (Inherited from InventMovement.) | |
transRefId | (Inherited from InventMovement.) | |
transSchedTime | (Inherited from InventMovement.) | |
transSign | Determines the transaction sign for the movement. (Overrides the transSign Method.) | |
transType | Indicates the transaction type of the movement. (Overrides the transType Method.) | |
transUnitId | (Inherited from InventMovement.) | |
updateAutoDimLocationId | (Inherited from InventMovement.) | |
updateAutoDimOwnerId_RU | (Inherited from InventMovement.) | |
updateAutoEstimate | (Inherited from InventMovement.) | |
updateAutoLossProfit | (Inherited from InventMovement.) | |
updateAutoPhysical | (Inherited from InventMovement.) | |
updateBuffer | Updates the movement buffer and optionally the reservation. (Inherited from InventMovement.) | |
updateDoBuffer | (Inherited from InventMovement.) | |
updateGoodsInRoute_RU | (Inherited from InventMovement.) | |
updateInheritedBatchesPostRegistration | Updates the batches created for co-products and finished goods from the ingredients, based on the rules defined for lot inheritance. (Inherited from InventMovement.) | |
updateLedgerAdjust | (Inherited from InventMovement.) | |
updateLedgerAdjustSecCur_RU | (Inherited from InventMovement.) | |
updateLedgerFinancial | (Inherited from InventMovement.) | |
updateLedgerFinancialSecCur_RU | (Inherited from InventMovement.) | |
updateLedgerPhysical | (Inherited from InventMovement.) | |
updatePeggingRequirements | Updates the pegging requirements of the inventory movement. (Inherited from InventMovement.) | |
updateReqExplodeReservation | (Inherited from InventMovement.) | |
updateReservation | (Inherited from InventMovement.) | |
updateSerialNumIssue | Verifies if a particular issue inventory transaction update can be done for a particular serial number, and creates a serial number if necessary. (Inherited from InventMovement.) | |
updateSerialNumReceipt | Verifies if a particular receipt inventory transaction update can be done for a particular serial number, and creates a serial number if necessary. (Inherited from InventMovement.) | |
usageCount | Returns the current number of references, that is, the value of the reference counter, that the object has. (Inherited from Object.) | |
useEnteredPriceAsCost | (Inherited from InventMovement.) | |
viewCacheInventTransOrigin | (Inherited from InventMovement.) | |
wait | Pauses a process. (Inherited from Object.) | |
whsMustConsiderBatchProcessing | Determines if special batch processing must be used during reservation. (Inherited from InventMovement.) | |
whsUpdateAutoDimStatusId | For WHS controlled items with inventory status not set updates it with default value and returns true, otherwise returns false. (Inherited from InventMovement.) | |
wmsShipmentGroupingRefId | Retrieves the grouping reference ID to be used with output orders. (Inherited from InventMovement.) | |
wmsShipmentGroupingTransType | Retrieves the grouping transaction type to be used with output orders. (Inherited from InventMovement.) | |
xml | Returns an XML string that represents the current object. (Inherited from Object.) | |
::newFromAssetComponent | Initializes a new instance of the InventMov_Component_JP class that is based on the specified record. |
Top
Inheritance Hierarchy
Object Class
InventMovement Class
InventMov_Component_JP Class