Share via

Transfer data with the AzCopy v8.1 on Windows

  • Article

AzCopy is a command-line utility designed for copying data to/from Microsoft Azure Blob, File, and Table storage, using simple commands designed for optimal performance. You can copy data between a file system and a storage account, or between storage accounts.

Important

This article describes an older version of AzCopy. To install the most recent version of AzCopy, see AzCopy v10.

If you choose to install the older version of AzCopy (AzCopy v8.1), then there are multiple versions that you can download. AzCopy on Windows offers Windows style command-line options. AzCopy on Linux targets Linux platforms offering POSIX style command-line options. This article covers AzCopy on Windows.

Download and install AzCopy (v8.1) on Windows

Download the AzCopy (v8.1) on Windows.

AzCopy on Windows 8.1 Release Notes

  • Table service is no longer supported in the latest version. If you use Table export feature, download AzCopy 7.3 version.
  • Built with .NET Core 2.1, and all .NET Core dependencies are now packaged in the installation.
  • Added OAuth authentication support. Use azcopy login to log on using Azure Active Directory.

Azcopy with Table support (v7.3)

Download the AzCopy 7.3 with Table support.

Post-installation Step

After installing AzCopy on Windows using the installer, open a command window and navigate to the AzCopy installation directory on your computer - where the AzCopy.exe executable is located. If desired, you can add the AzCopy installation location to your system path. By default, AzCopy is installed to %ProgramFiles(x86)%\Microsoft SDKs\Azure\AzCopy or %ProgramFiles%\Microsoft SDKs\Azure\AzCopy.

Writing your first AzCopy command

The basic syntax for AzCopy commands is:

AzCopy /Source:<source> /Dest:<destination> [Options]

The following examples demonstrate a variety of scenarios for copying data to and from Microsoft Azure Blobs, Files, and Tables. Refer to the AzCopy Parameters section for a detailed explanation of the parameters used in each sample.

Download blobs from Blob storage

Let's look at several ways to download blobs using AzCopy.

Download a single blob

AzCopy /Source:https://myaccount.blob.core.windows.net/mycontainer /Dest:C:\myfolder /SourceKey:key /Pattern:"abc.txt"

Note that if the folder C:\myfolder does not exist, AzCopy creates it and download abc.txt into the new folder.

Download a single blob from the secondary region

AzCopy /Source:https://myaccount-secondary.blob.core.windows.net/mynewcontainer /Dest:C:\myfolder /SourceKey:key /Pattern:"abc.txt"

Note that you must have read-access geo-redundant storage enabled to access the secondary region.

Download all blobs in a container

AzCopy /Source:https://myaccount.blob.core.windows.net/mycontainer /Dest:C:\myfolder /SourceKey:key /S

Assume the following blobs reside in the specified container:

abc.txt
abc1.txt
abc2.txt
vd1\a.txt
vd1\abcd.txt

After the download operation, the directory C:\myfolder includes the following files:

C:\myfolder\abc.txt
C:\myfolder\abc1.txt
C:\myfolder\abc2.txt
C:\myfolder\vd1\a.txt
C:\myfolder\vd1\abcd.txt

If you do not specify option /S, no blobs are downloaded.

Download blobs with a specific prefix

AzCopy /Source:https://myaccount.blob.core.windows.net/mycontainer /Dest:C:\myfolder /SourceKey:key /Pattern:a /S

Assume the following blobs reside in the specified container. All blobs beginning with the prefix a are downloaded:

abc.txt
abc1.txt
abc2.txt
xyz.txt
vd1\a.txt
vd1\abcd.txt

After the download operation, the folder C:\myfolder includes the following files:

C:\myfolder\abc.txt
C:\myfolder\abc1.txt
C:\myfolder\abc2.txt

The prefix applies to the virtual directory, which forms the first part of the blob name. In the example shown above, the virtual directory does not match the specified prefix, so it is not downloaded. In addition, if the option /S is not specified, AzCopy does not download any blobs.

Set the last-modified time of exported files to be same as the source blobs

AzCopy /Source:https://myaccount.blob.core.windows.net/mycontainer /Dest:C:\myfolder /SourceKey:key /MT

You can also exclude blobs from the download operation based on their last-modified time. For example, if you want to exclude blobs whose last modified time is the same or newer than the destination file, add the /XN option:

AzCopy /Source:https://myaccount.blob.core.windows.net/mycontainer /Dest:C:\myfolder /SourceKey:key /MT /XN

If you want to exclude blobs whose last modified time is the same or older than the destination file, add the /XO option:

AzCopy /Source:https://myaccount.blob.core.windows.net/mycontainer /Dest:C:\myfolder /SourceKey:key /MT /XO

Upload blobs to Blob storage

Let's look at several ways to upload blobs using AzCopy.

Upload a single blob

AzCopy /Source:C:\myfolder /Dest:https://myaccount.blob.core.windows.net/mycontainer /DestKey:key /Pattern:"abc.txt"

If the specified destination container does not exist, AzCopy creates it and uploads the file into it.

Upload a single blob to a virtual directory

AzCopy /Source:C:\myfolder /Dest:https://myaccount.blob.core.windows.net/mycontainer/vd /DestKey:key /Pattern:abc.txt

If the specified virtual directory does not exist, AzCopy uploads the file to include the virtual directory in its name (e.g., vd/abc.txt in the example above).

Upload all blobs in a folder

AzCopy /Source:C:\myfolder /Dest:https://myaccount.blob.core.windows.net/mycontainer /DestKey:key /S

Specifying option /S uploads the contents of the specified directory to Blob storage recursively, meaning that all subfolders and their files are uploaded as well. For instance, assume the following files reside in folder C:\myfolder:

C:\myfolder\abc.txt
C:\myfolder\abc1.txt
C:\myfolder\abc2.txt
C:\myfolder\subfolder\a.txt
C:\myfolder\subfolder\abcd.txt

After the upload operation, the container includes the following files:

abc.txt
abc1.txt
abc2.txt
subfolder\a.txt
subfolder\abcd.txt

If you do not specify option /S, AzCopy does not upload recursively. After the upload operation, the container includes the following files:

abc.txt
abc1.txt
abc2.txt

Upload blobs matching a specific pattern

AzCopy /Source:C:\myfolder /Dest:https://myaccount.blob.core.windows.net/mycontainer /DestKey:key /Pattern:a* /S

Assume the following files reside in folder C:\myfolder:

C:\myfolder\abc.txt
C:\myfolder\abc1.txt
C:\myfolder\abc2.txt
C:\myfolder\xyz.txt
C:\myfolder\subfolder\a.txt
C:\myfolder\subfolder\abcd.txt

After the upload operation, the container includes the following files:

abc.txt
abc1.txt
abc2.txt
subfolder\a.txt
subfolder\abcd.txt

If you do not specify option /S, AzCopy only uploads blobs that don't reside in a virtual directory:

C:\myfolder\abc.txt
C:\myfolder\abc1.txt
C:\myfolder\abc2.txt

Specify the MIME content type of a destination blob

By default, AzCopy sets the content type of a destination blob to application/octet-stream. Beginning with version 3.1.0, you can explicitly specify the content type via the option /SetContentType:[content-type]. This syntax sets the content type for all blobs in an upload operation.

AzCopy /Source:C:\myfolder\ /Dest:https://myaccount.blob.core.windows.net/myContainer/ /DestKey:key /Pattern:ab /SetContentType:video/mp4

If you specify /SetContentType without a value, AzCopy sets each blob or file's content type according to its file extension.

AzCopy /Source:C:\myfolder\ /Dest:https://myaccount.blob.core.windows.net/myContainer/ /DestKey:key /Pattern:ab /SetContentType

Copy blobs in Blob storage

Let's look at several ways to copy blobs from one location to another using AzCopy.

Copy a single blob from one container to another within the same storage account

AzCopy /Source:https://myaccount.blob.core.windows.net/mycontainer1 /Dest:https://myaccount.blob.core.windows.net/mycontainer2 /SourceKey:key /DestKey:key /Pattern:abc.txt

When you copy a blob within a Storage account, a server-side copy operation is performed.

Copy a single blob from one storage account to another

AzCopy /Source:https://sourceaccount.blob.core.windows.net/mycontainer1 /Dest:https://destaccount.blob.core.windows.net/mycontainer2 /SourceKey:key1 /DestKey:key2 /Pattern:abc.txt

When you copy a blob across Storage accounts, a server-side copy operation is performed.

Copy a single blob from the secondary region to the primary region

AzCopy /Source:https://myaccount1-secondary.blob.core.windows.net/mynewcontainer1 /Dest:https://myaccount2.blob.core.windows.net/mynewcontainer2 /SourceKey:key1 /DestKey:key2 /Pattern:abc.txt

Note that you must have read-access geo-redundant storage enabled to access secondary storage.

Copy a single blob and its snapshots from one storage account to another

AzCopy /Source:https://sourceaccount.blob.core.windows.net/mycontainer1 /Dest:https://destaccount.blob.core.windows.net/mycontainer2 /SourceKey:key1 /DestKey:key2 /Pattern:abc.txt /Snapshot

After the copy operation, the target container includes the blob and its snapshots. Assuming the blob in the example above has two snapshots, the container includes the following blob and snapshots:

abc.txt
abc (2013-02-25 080757).txt
abc (2014-02-21 150331).txt

Copy all blobs in a container to another storage account

AzCopy /Source:https://sourceaccount.blob.core.windows.net/mycontainer1 
/Dest:https://destaccount.blob.core.windows.net/mycontainer2 /SourceKey:key1 /DestKey:key2 /S

Specifying option /S uploads the contents of the specified container recursively. See Upload all blobs in a folder for more information and an example.

Synchronously copy blobs from one storage account to another

AzCopy by default copies data between two storage endpoints asynchronously. Therefore, the copy operation runs in the background using spare bandwidth capacity that has no SLA in terms of how fast a blob is copied, and AzCopy periodically checks the copy status until the copying is completed or failed.

The /SyncCopy option ensures that the copy operation gets consistent speed. AzCopy performs the synchronous copy by downloading the blobs to copy from the specified source to local memory, and then uploading them to the Blob storage destination.

AzCopy /Source:https://myaccount1.blob.core.windows.net/myContainer/ /Dest:https://myaccount2.blob.core.windows.net/myContainer/ /SourceKey:key1 /DestKey:key2 /Pattern:ab /SyncCopy

/SyncCopy might generate additional egress cost compared to asynchronous copy, the recommended approach is to use this option in an Azure VM that is in the same region as your source storage account to avoid egress cost.

Download files from File storage

Let's look at several ways to download files using AzCopy.

Download a single file

AzCopy /Source:https://myaccount.file.core.windows.net/myfileshare/myfolder1/ /Dest:C:\myfolder /SourceKey:key /Pattern:abc.txt

If the specified source is an Azure file share, then you must either specify the exact file name, (e.g. abc.txt) to download a single file, or specify option /S to download all files in the share recursively. Attempting to specify both a file pattern and option /S together results in an error.

Download all files in a directory

AzCopy /Source:https://myaccount.file.core.windows.net/myfileshare/ /Dest:C:\myfolder /SourceKey:key /S

Note that empty folders are not downloaded.

Upload files to an Azure file share

Let's look at several ways to upload files using AzCopy.

Upload a single file

AzCopy /Source:C:\myfolder /Dest:https://myaccount.file.core.windows.net/myfileshare/ /DestKey:key /Pattern:abc.txt

Upload all files in a folder

AzCopy /Source:C:\myfolder /Dest:https://myaccount.file.core.windows.net/myfileshare/ /DestKey:key /S

Note that empty folders are not uploaded.

Upload files matching a specific pattern

AzCopy /Source:C:\myfolder /Dest:https://myaccount.file.core.windows.net/myfileshare/ /DestKey:key /Pattern:ab* /S

Copy files in File storage

Let's look at several ways to copy files in an Azure file share using AzCopy.

Copy from one file share to another

AzCopy /Source:https://myaccount1.file.core.windows.net/myfileshare1/ /Dest:https://myaccount2.file.core.windows.net/myfileshare2/ /SourceKey:key1 /DestKey:key2 /S

When you copy a file across file shares, a server-side copy operation is performed.

Copy from an Azure file share to Blob storage

AzCopy /Source:https://myaccount1.file.core.windows.net/myfileshare/ /Dest:https://myaccount2.blob.core.windows.net/mycontainer/ /SourceKey:key1 /DestKey:key2 /S

When you copy a file from file share to blob, a server-side copy operation is performed.

Copy a blob from Blob storage to an Azure file share

AzCopy /Source:https://myaccount1.blob.core.windows.net/mycontainer/ /Dest:https://myaccount2.file.core.windows.net/myfileshare/ /SourceKey:key1 /DestKey:key2 /S

When you copy a file from a blob to a file share, a server-side copy operation is performed.

Synchronously copy files

You can specify the /SyncCopy option to copy data from File Storage to File Storage, from File Storage to Blob Storage and from Blob Storage to File Storage synchronously, AzCopy does this by downloading the source data to local memory and upload it again to destination. Standard egress cost applies.

AzCopy /Source:https://myaccount1.file.core.windows.net/myfileshare1/ /Dest:https://myaccount2.file.core.windows.net/myfileshare2/ /SourceKey:key1 /DestKey:key2 /S /SyncCopy

When copying from File storage to Blob storage, the default blob type is block blob; the user can specify the option /BlobType:page to change the destination blob type.

Note that /SyncCopy might generate additional egress costs compared to asynchronous copy. The recommended approach is to use this option in the Azure VM which is in the same region as your source storage account to avoid egress cost.

Export data from Table storage

Let's take a look at exporting data from Azure Table storage using AzCopy.

Export a table

AzCopy /Source:https://myaccount.table.core.windows.net/myTable/ /Dest:C:\myfolder\ /SourceKey:key

AzCopy writes a manifest file to the specified destination folder. The manifest file is used in the import process to locate the necessary data files and perform data validation. The manifest file uses the following naming convention by default:

<account name>_<table name>_<timestamp>.manifest

User can also specify the option /Manifest:<manifest file name> to set the manifest file name.

AzCopy /Source:https://myaccount.table.core.windows.net/myTable/ /Dest:C:\myfolder\ /SourceKey:key /Manifest:abc.manifest

Split an export from Table storage into multiple files

AzCopy /Source:https://myaccount.table.core.windows.net/mytable/ /Dest:C:\myfolder /SourceKey:key /S /SplitSize:100

AzCopy uses a volume index in the split data file names to distinguish multiple files. The volume index consists of two parts, a partition key range index and a split file index. Both indexes are zero-based.

The partition key range index is 0 if the user does not specify option /PKRS.

For instance, suppose AzCopy generates two data files after the user specifies option /SplitSize. The resulting data file names might be:

myaccount_mytable_20140903T051850.8128447Z_0_0_C3040FE8.json
myaccount_mytable_20140903T051850.8128447Z_0_1_0AB9AC20.json

Note that the minimum possible value for option /SplitSize is 32MB. If the specified destination is Blob storage, AzCopy splits the data file once its sizes reaches the blob size limitation (200GB), regardless of whether option /SplitSize has been specified by the user.

Export a table to JSON or CSV data file format

By default, AzCopy exports tables to JSON data files. You can specify the option /PayloadFormat:JSON|CSV to export the tables as JSON or CSV.

AzCopy /Source:https://myaccount.table.core.windows.net/myTable/ /Dest:C:\myfolder\ /SourceKey:key /PayloadFormat:CSV

When specifying the CSV payload format, AzCopy also generates a schema file with file extension .schema.csv for each data file.

Export table entities concurrently

AzCopy /Source:https://myaccount.table.core.windows.net/myTable/ /Dest:C:\myfolder\ /SourceKey:key /PKRS:"aa#bb"

AzCopy starts concurrent operations to export entities when the user specifies option /PKRS. Each operation exports one partition key range.

Note that the number of concurrent operations is also controlled by option /NC. AzCopy uses the number of core processors as the default value of /NC when copying table entities, even if /NC was not specified. When the user specifies option /PKRS, AzCopy uses the smaller of the two values - partition key ranges versus implicitly or explicitly specified concurrent operations - to determine the number of concurrent operations to start. For more details, type AzCopy /?:NC at the command line.

Export a table to Blob storage

AzCopy /Source:https://myaccount.table.core.windows.net/myTable/ /Dest:https://myaccount.blob.core.windows.net/mycontainer/ /SourceKey:key1 /Destkey:key2

AzCopy generates a JSON data file into the blob container with following naming convention:

<account name>_<table name>_<timestamp>_<volume index>_<CRC>.json

The generated JSON data file follows the payload format for minimal metadata. For details on this payload format, see Payload Format for Table Service Operations.

Note that when exporting tables to blobs, AzCopy downloads the Table entities to local temporary data files and then uploads those entities to the blob. These temporary data files are put into the journal file folder with the default path "%LocalAppData%\Microsoft\Azure\AzCopy", you can specify option /Z:[journal-file-folder] to change the journal file folder location and thus change the temporary data files location. The temporary data files' size is decided by your table entities' size and the size you specified with the option /SplitSize, although the temporary data file in local disk is deleted instantly once it has been uploaded to the blob, please make sure you have enough local disk space to store these temporary data files before they are deleted.

Import data into Table storage

Let's take a look at importing data into Azure Table storage using AzCopy.

Import a table

AzCopy /Source:C:\myfolder\ /Dest:https://myaccount.table.core.windows.net/mytable1/ /DestKey:key /Manifest:"myaccount_mytable_20140103T112020.manifest" /EntityOperation:InsertOrReplace

The option /EntityOperation indicates how to insert entities into the table. Possible values are:

  • InsertOrSkip: Skips an existing entity or inserts a new entity if it does not exist in the table.
  • InsertOrMerge: Merges an existing entity or inserts a new entity if it does not exist in the table.
  • InsertOrReplace: Replaces an existing entity or inserts a new entity if it does not exist in the table.

Note that you cannot specify option /PKRS in the import scenario. Unlike the export scenario, in which you must specify option /PKRS to start concurrent operations, AzCopy starts concurrent operations by default when you import a table. The default number of concurrent operations started is equal to the number of core processors; however, you can specify a different number of concurrent with option /NC. For more details, type AzCopy /?:NC at the command line.

Note that AzCopy only supports importing for JSON, not CSV. AzCopy does not support table imports from user-created JSON and manifest files. Both of these files must come from an AzCopy table export. To avoid errors, please do not modify the exported JSON or manifest file.

Import entities into a table from Blob storage

Assume a Blob container contains the following: A JSON file representing an Azure Table and its accompanying manifest file.

myaccount_mytable_20140103T112020.manifest
myaccount_mytable_20140103T112020_0_0_0AF395F1DC42E952.json

You can run the following command to import entities into a table using the manifest file in that blob container:

AzCopy /Source:https://myaccount.blob.core.windows.net/mycontainer /Dest:https://myaccount.table.core.windows.net/mytable /SourceKey:key1 /DestKey:key2 /Manifest:"myaccount_mytable_20140103T112020.manifest" /EntityOperation:"InsertOrReplace"

Other AzCopy features

Let's take a look at some other AzCopy features.

Only copy data that doesn't exist in the destination

The /XO and /XN parameters allow you to exclude older or newer source resources from being copied, respectively. If you only want to copy source resources that don't exist in the destination, you can specify both parameters in the AzCopy command:

/Source:http://myaccount.blob.core.windows.net/mycontainer /Dest:C:\myfolder /SourceKey:<sourcekey> /S /XO /XN

/Source:C:\myfolder /Dest:http://myaccount.file.core.windows.net/myfileshare /DestKey:<destkey> /S /XO /XN

/Source:http://myaccount.blob.core.windows.net/mycontainer /Dest:http://myaccount.blob.core.windows.net/mycontainer1 /SourceKey:<sourcekey> /DestKey:<destkey> /S /XO /XN

Note that this is not supported when either the source or destination is a table.

Use a response file to specify command-line parameters

AzCopy /@:"C:\responsefiles\copyoperation.txt"

You can include any AzCopy command-line parameters in a response file. AzCopy processes the parameters in the file as if they had been specified on the command line, performing a direct substitution with the contents of the file.

Assume a response file named copyoperation.txt, that contains the following lines. Each AzCopy parameter can be specified on a single line

/Source:http://myaccount.blob.core.windows.net/mycontainer /Dest:C:\myfolder /SourceKey:<sourcekey> /S /Y

or on separate lines:

/Source:http://myaccount.blob.core.windows.net/mycontainer
/Dest:C:\myfolder
/SourceKey:<sourcekey>
/S
/Y

AzCopy fails if you split the parameter across two lines, as shown here for the /sourcekey parameter:

http://myaccount.blob.core.windows.net/mycontainer
 C:\myfolder
/sourcekey:
<sourcekey>
/S
/Y

Use multiple response files to specify command-line parameters

Assume a response file named source.txt that specifies a source container:

/Source:http://myaccount.blob.core.windows.net/mycontainer

And a response file named dest.txt that specifies a destination folder in the file system:

/Dest:C:\myfolder

And a response file named options.txt that specifies options for AzCopy:

/S /Y

To call AzCopy with these response files, all of which reside in a directory C:\responsefiles, use this command:

AzCopy /@:"C:\responsefiles\source.txt" /@:"C:\responsefiles\dest.txt" /SourceKey:<sourcekey> /@:"C:\responsefiles\options.txt"

AzCopy processes this command just as it would if you included all of the individual parameters on the command line:

AzCopy /Source:http://myaccount.blob.core.windows.net/mycontainer /Dest:C:\myfolder /SourceKey:<sourcekey> /S /Y

Specify a shared access signature (SAS)

AzCopy /Source:https://myaccount.blob.core.windows.net/mycontainer1 /Dest:https://myaccount.blob.core.windows.net/mycontainer2 /SourceSAS:SAS1 /DestSAS:SAS2 /Pattern:abc.txt

You can also specify a SAS on the container URI:

AzCopy /Source:https://myaccount.blob.core.windows.net/mycontainer1/?SourceSASToken /Dest:C:\myfolder /S

Journal file folder

Each time you issue a command to AzCopy, it checks whether a journal file exists in the default folder, or whether it exists in a folder that you specified via this option. If the journal file does not exist in either place, AzCopy treats the operation as new and generates a new journal file.

If the journal file does exist, AzCopy checks whether the command line that you input matches the command line in the journal file. If the two command lines match, AzCopy resumes the incomplete operation. If they do not match, you are prompted to either overwrite the journal file to start a new operation, or to cancel the current operation.

If you want to use the default location for the journal file:

AzCopy /Source:C:\myfolder /Dest:https://myaccount.blob.core.windows.net/mycontainer /DestKey:key /Z

If you omit option /Z, or specify option /Z without the folder path, as shown above, AzCopy creates the journal file in the default location, which is %SystemDrive%\Users\%username%\AppData\Local\Microsoft\Azure\AzCopy. If the journal file already exists, then AzCopy resumes the operation based on the journal file.

If you want to specify a custom location for the journal file:

AzCopy /Source:C:\myfolder /Dest:https://myaccount.blob.core.windows.net/mycontainer /DestKey:key /Z:C:\journalfolder\

This example creates the journal file if it does not already exist. If it does exist, then AzCopy resumes the operation based on the journal file.

If you want to resume an AzCopy operation:

AzCopy /Z:C:\journalfolder\

This example resumes the last operation, which may have failed to complete.

Generate a log file

AzCopy /Source:C:\myfolder /Dest:https://myaccount.blob.core.windows.net/mycontainer /DestKey:key /V

If you specify option /V without providing a file path to the verbose log, then AzCopy creates the log file in the default location, which is %SystemDrive%\Users\%username%\AppData\Local\Microsoft\Azure\AzCopy.

Otherwise, you can create an log file in a custom location:

AzCopy /Source:C:\myfolder /Dest:https://myaccount.blob.core.windows.net/mycontainer /DestKey:key /V:C:\myfolder\azcopy1.log

Note that if you specify a relative path following option /V, such as /V:test/azcopy1.log, then the verbose log is created in the current working directory within a subfolder named test.

Specify the number of concurrent operations to start

Option /NC specifies the number of concurrent copy operations. By default, AzCopy starts a certain number of concurrent operations to increase the data transfer throughput. For Table operations, the number of concurrent operations is equal to the number of processors you have. For Blob and File operations, the number of concurrent operations is equal 8 times the number of processors you have. If you are running AzCopy across a low-bandwidth network, you can specify a lower number for /NC to avoid failure caused by resource competition.

Run AzCopy against the Azure Storage Emulator

You can run AzCopy against the Azure Storage Emulator for blobs:

AzCopy /Source:https://127.0.0.1:10000/myaccount/mycontainer/ /Dest:C:\myfolder /SourceKey:key /SourceType:Blob /S

You can also run it for tables:

AzCopy /Source:https://127.0.0.1:10002/myaccount/mytable/ /Dest:C:\myfolder /SourceKey:key /SourceType:Table

Automatically determine Content Type of a Blob

AzCopy determines content type of a blob based on a JSON file that stores content type to file extension mapping. This JSON file is named AzCopyConfig.json, and is located in the AzCopy directory. If you have a file type that is not in the list you can append the mapping to the JSON file:

{
  "MIMETypeMapping": {
    ".myext": "text/mycustomtype",
    .
    .
  }
}

AzCopy Parameters

Parameters for AzCopy are described below. You can also type one of the following commands from the command line for help in using AzCopy:

  • For detailed command-line help for AzCopy: AzCopy /?
  • For detailed help with any AzCopy parameter: AzCopy /?:SourceKey
  • For command-line examples: AzCopy /?:Sample

/Source:"source"

Specifies the source data from which to copy. The source can be a file system directory, a blob container, a blob virtual directory, a storage file share, a storage file directory, or an Azure table.

Applicable to: Blobs, Files, Tables

/Dest:"destination"

Specifies the destination to copy to. The destination can be a file system directory, a blob container, a blob virtual directory, a storage file share, a storage file directory, or an Azure table.

Applicable to: Blobs, Files, Tables

/Pattern:"file-pattern"

Specifies a file pattern that indicates which files to copy. The behavior of the /Pattern parameter is determined by the location of the source data, and the presence of the recursive mode option. Recursive mode is specified via option /S.

If the specified source is a directory in the file system, then standard wildcards are in effect, and the file pattern provided is matched against files within the directory. If option /S is specified, then AzCopy also matches the specified pattern against all files in any subfolders beneath the directory.

If the specified source is a blob container or virtual directory, then wildcards are not applied. If option /S is specified, then AzCopy interprets the specified file pattern as a blob prefix. If option /S is not specified, then AzCopy matches the file pattern against exact blob names.

If the specified source is an Azure file share, then you must either specify the exact file name, (e.g. abc.txt) to copy a single file, or specify option /S to copy all files in the share recursively. Attempting to specify both a file pattern and option /S together results in an error.

AzCopy uses case-sensitive matching when the /Source is a blob container or blob virtual directory, and uses case-insensitive matching in all the other cases.

The default file pattern used when no file pattern is specified is . for a file system location or an empty prefix for an Azure Storage location. Specifying multiple file patterns is not supported.

Applicable to: Blobs, Files

/DestKey:"storage-key"

Specifies the storage account key for the destination resource.

Applicable to: Blobs, Files, Tables

/DestSAS:"sas-token"

Specifies a Shared Access Signature (SAS) with READ and WRITE permissions for the destination (if applicable). Surround the SAS with double quotes, as it may contains special command-line characters.

If the destination resource is a blob container, file share or table, you can either specify this option followed by the SAS token, or you can specify the SAS as part of the destination blob container, file share or table's URI, without this option.

If the source and destination are both blobs, then the destination blob must reside within the same storage account as the source blob.

Applicable to: Blobs, Files, Tables

/SourceKey:"storage-key"

Specifies the storage account key for the source resource.

Applicable to: Blobs, Files, Tables

/SourceSAS:"sas-token"

Specifies a Shared Access Signature with READ and LIST permissions for the source (if applicable). Surround the SAS with double quotes, as it may contains special command-line characters.

If the source resource is a blob container, and neither a key nor a SAS is provided, then the blob container is read via anonymous access.

If the source is a file share or table, a key or a SAS must be provided.

Applicable to: Blobs, Files, Tables

/S

Specifies recursive mode for copy operations. In recursive mode, AzCopy copies all blobs or files that match the specified file pattern, including those in subfolders.

Applicable to: Blobs, Files

/BlobType:"block" | "page" | "append"

Specifies whether the destination blob is a block blob, a page blob, or an append blob. This option is applicable only when you are uploading a blob. Otherwise, an error is generated. If the destination is a blob and this option is not specified, by default, AzCopy creates a block blob.

Applicable to: Blobs

/CheckMD5

Calculates an MD5 hash for downloaded data and verifies that the MD5 hash stored in the blob or file's Content-MD5 property matches the calculated hash. If the values do not match, AzCopy will fail to download the data. The MD5 check is turned off by default, so you must specify this option to perform the MD5 check when downloading data.

Note that Azure Storage doesn't guarantee that the MD5 hash stored for the blob or file is up-to-date. It is client's responsibility to update the MD5 whenever the blob or file is modified. In the case of disk images (managed or unmanaged disks), Azure VMs do not update the MD5 value as the disk contents change, hence /CheckMD5 will throw an error when downloading disk images.

AzCopy v8 always sets the Content-MD5 property for an Azure blob or file after uploading it to the service.

Applicable to: Blobs, Files

/Snapshot

Indicates whether to transfer snapshots. This option is only valid when the source is a blob.

The transferred blob snapshots are renamed in this format: blob-name (snapshot-time).extension

By default, snapshots are not copied.

Applicable to: Blobs

/V:[verbose-log-file]

Outputs verbose status messages into a log file.

By default, the verbose log file is named AzCopyVerbose.log in %LocalAppData%\Microsoft\Azure\AzCopy. If you specify an existing file location for this option, the verbose log is appended to that file.

Applicable to: Blobs, Files, Tables

/Z:[journal-file-folder]

Specifies a journal file folder for resuming an operation.

AzCopy always supports resuming if an operation has been interrupted.

If this option is not specified, or it is specified without a folder path, then AzCopy creates the journal file in the default location, which is %LocalAppData%\Microsoft\Azure\AzCopy.

Each time you issue a command to AzCopy, it checks whether a journal file exists in the default folder, or whether it exists in a folder that you specified via this option. If the journal file does not exist in either place, AzCopy treats the operation as new and generates a new journal file.

If the journal file does exist, AzCopy checks whether the command line that you input matches the command line in the journal file. If the two command lines match, AzCopy resumes the incomplete operation. If they do not match, you are prompted to either overwrite the journal file to start a new operation, or to cancel the current operation.

The journal file is deleted upon successful completion of the operation.

Note that resuming an operation from a journal file created by a previous version of AzCopy is not supported.

Applicable to: Blobs, Files, Tables

/@:"parameter-file"

Specifies a file that contains parameters. AzCopy processes the parameters in the file just as if they had been specified on the command line.

In a response file, you can either specify multiple parameters on a single line, or specify each parameter on its own line. Note that an individual parameter cannot span multiple lines.

Response files can include comments lines that begin with the # symbol.

You can specify multiple response files. However, note that AzCopy does not support nested response files.

Applicable to: Blobs, Files, Tables

/Y

Suppresses all AzCopy confirmation prompts. This option also allows the use of write-only SAS tokens for data upload scenarios, when /XO and /XN are not specified.

Applicable to: Blobs, Files, Tables

/L

Specifies a listing operation only; no data is copied.

AzCopy interprets the using of this option as a simulation for running the command line without this option /L and counts how many objects are copied, you can specify option /V at the same time to check which objects are copied in the verbose log.

The behavior of this option is also determined by the location of the source data and the presence of the recursive mode option /S and file pattern option /Pattern.

AzCopy requires LIST and READ permission of this source location when using this option.

Applicable to: Blobs, Files

/MT

Sets the downloaded file's last-modified time to be the same as the source blob or file's.

Applicable to: Blobs, Files

/XN

Excludes a newer source resource. The resource is not copied if the last modified time of the source is the same or newer than destination.

Applicable to: Blobs, Files

/XO

Excludes an older source resource. The resource is not copied if the last modified time of the source is the same or older than destination.

Applicable to: Blobs, Files

/A

Uploads only files that have the Archive attribute set.

Applicable to: Blobs, Files

/IA:[RASHCNETOI]

Uploads only files that have any of the specified attributes set.

Available attributes include:

  • R = Read-only files
  • A = Files ready for archiving
  • S = System files
  • H = Hidden files
  • C = Compressed files
  • N = Normal files
  • E = Encrypted files
  • T = Temporary files
  • O = Offline files
  • I = Non-indexed files

Applicable to: Blobs, Files

/XA:[RASHCNETOI]

Excludes files that have any of the specified attributes set.

Available attributes include:

  • R = Read-only files
  • A = Files ready for archiving
  • S = System files
  • H = Hidden files
  • C = Compressed files
  • N = Normal files
  • E = Encrypted files
  • T = Temporary files
  • O = Offline files
  • I = Non-indexed files

Applicable to: Blobs, Files

/Delimiter:"delimiter"

Indicates the delimiter character used to delimit virtual directories in a blob name.

By default, AzCopy uses / as the delimiter character. However, AzCopy supports using any common character (such as @, #, or %) as a delimiter. If you need to include one of these special characters on the command line, enclose the file name with double quotes.

This option is only applicable for downloading blobs.

Applicable to: Blobs

/NC:"number-of-concurrent-operations"

Specifies the number of concurrent operations.

AzCopy by default starts a certain number of concurrent operations to increase the data transfer throughput. Note that large number of concurrent operations in a low-bandwidth environment may overwhelm the network connection and prevent the operations from fully completing. Throttle concurrent operations based on actual available network bandwidth.

The upper limit for concurrent operations is 512.

Applicable to: Blobs, Files, Tables

/SourceType:"Blob" | "Table"

Specifies that the source resource is a blob available in the local development environment, running in the storage emulator.

Applicable to: Blobs, Tables

/DestType:"Blob" | "Table"

Specifies that the destination resource is a blob available in the local development environment, running in the storage emulator.

Applicable to: Blobs, Tables

/PKRS:"key1#key2#key3#..."

Splits the partition key range to enable exporting table data in parallel, which increases the speed of the export operation.

If this option is not specified, then AzCopy uses a single thread to export table entities. For example, if the user specifies /PKRS:"aa#bb", then AzCopy starts three concurrent operations.

Each operation exports one of three partition key ranges, as shown below:

[first-partition-key, aa)

[aa, bb)

[bb, last-partition-key]

Applicable to: Tables

/SplitSize:"file-size"

Specifies the exported file split size in MB, the minimal value allowed is 32.

If this option is not specified, AzCopy exports table data to a single file.

If the table data is exported to a blob, and the exported file size reaches the 200 GB limit for blob size, then AzCopy splits the exported file, even if this option is not specified.

Applicable to: Tables

/EntityOperation:"InsertOrSkip" | "InsertOrMerge" | "InsertOrReplace"

Specifies the table data import behavior.

  • InsertOrSkip - Skips an existing entity or inserts a new entity if it does not exist in the table.
  • InsertOrMerge - Merges an existing entity or inserts a new entity if it does not exist in the table.
  • InsertOrReplace - Replaces an existing entity or inserts a new entity if it does not exist in the table.

Applicable to: Tables

/Manifest:"manifest-file"

Specifies the manifest file for the table export and import operation.

This option is optional during the export operation, AzCopy generates a manifest file with predefined name if this option is not specified.

This option is required during the import operation for locating the data files.

Applicable to: Tables

/SyncCopy

Indicates whether to synchronously copy blobs or files between two Azure Storage endpoints.

AzCopy by default uses server-side asynchronous copy. Specify this option to perform a synchronous copy, which downloads blobs or files to local memory and then uploads them to Azure Storage.

You can use this option when copying files within Blob storage, within File storage, or from Blob storage to File storage or vice versa.

Applicable to: Blobs, Files

/SetContentType:"content-type"

Specifies the MIME content type for destination blobs or files.

AzCopy sets the content type for a blob or file to application/octet-stream by default. You can set the content type for all blobs or files by explicitly specifying a value for this option.

If you specify this option without a value, then AzCopy sets each blob or file's content type according to its file extension.

Applicable to: Blobs, Files

/PayloadFormat:"JSON" | "CSV"

Specifies the format of the table exported data file.

If this option is not specified, by default AzCopy exports table data file in JSON format.

Applicable to: Tables

Known Issues and Best Practices

Let's take a look at some of the known issues and best practices.

Limit concurrent writes while copying data

When you copy blobs or files with AzCopy, keep in mind that another application may be modifying the data while you are copying it. If possible, ensure that the data you are copying is not being modified during the copy operation. For example, when copying a VHD associated with an Azure virtual machine, make sure that no other applications are currently writing to the VHD. A good way to do this is by leasing the resource to be copied. Alternately, you can create a snapshot of the VHD first and then copy the snapshot.

If you cannot prevent other applications from writing to blobs or files while they are being copied, then keep in mind that by the time the job finishes, the copied resources may no longer have full parity with the source resources.

Enable FIPS-compliant MD5 algorithms for AzCopy when you "Use FIPS-compliant algorithms for encryption, hashing and signing."

AzCopy by default uses .NET MD5 implementation to calculate the MD5 when copying objects, but there are some security requirements that need AzCopy to enable FIPS-compliant MD5 setting.

You can create an app.config file AzCopy.exe.config with property AzureStorageUseV1MD5 and put it aside with AzCopy.exe.

<?xml version="1.0" encoding="utf-8" ?>
<configuration>
  <appSettings>
    <add key="AzureStorageUseV1MD5" value="false"/>
  </appSettings>
</configuration>

For property "AzureStorageUseV1MD5":

  • True - The default value, AzCopy uses .NET MD5 implementation.
  • False – AzCopy uses FIPS-compliant MD5 algorithm.

FIPS-compliant algorithms are disabled by default on Windows. You can change this policy setting on your machine. In the Run window (Windows+R), type secpol.msc to open the Local Security Policy window. In the Security Settings window, navigate to Security Settings > Local Policies > Security Options. Locate the System cryptography: Use FIPS-compliant algorithms for encryption, hashing and signing policy. Double-click on the policy to see the value displayed in the Security Setting column.

Next steps

For more information about Azure Storage and AzCopy, see the following resources:

Azure Storage documentation:

Azure Storage blog posts: