Share via


VoIP Data Pathways Between Phones

A version of this page is also available for

Windows Embedded CE 6.0 R3

4/8/2010

The following illustration shows the different paths voice data can take between two dual mode (cellular and VoIP) phones. The two phones in the illustration are on separate cell networks and on separate IP PBXs. The solid blue arrows denote VoIP connections, and the dashed red arrows denote PSTN and cellular connections.

Aa923428.2c9a71c1-c873-4f2c-aff3-5c77ddc4937b(en-us,MSDN.10).gif

There are five unique paths through the figure. The factors that determine which path is employed for a particular call are:

  • Connection Mode setting or Network Preferences setting. This setting specifies whether an outgoing call is placed through the voice gateway or the cellular network, based upon factors like the availability of preferred wireless networks and time of day.
  • Destination phone number. In many deployments, phones will have separate VoIP and cellular phone numbers. A phone call is ultimately routed through the PSTN and to either the IP PBX (for a VoIP call) or the cellular network’s PBX (for a cellular call). It is possible to place a call over IP that is received as a cellular call. The path for such a call would be A->Voice Gateway A->Cell Network B->B.
  • Peer-to-peer call. A call that is placed directly to another VoIP device (typically using SIP URI) is routed directly to the device. The path is simply A->B. Features such as Push-to-talk will only work on peer-to-peer calls.

There are a number of variations of the above figure. When there is only one shared voice gateway, and therefore only one IP PBX, the IP PBX will allow the phones to set up a peer-to-peer call. The path for such a call is simply A->B.

Customized cellular features, such as push-to-talk over cellular, will only work when there is only one shared cellular network. The path for such a call is A->Cell Network->B.

The call recipient, B, can automatically forward missed VoIP calls to cell. To do this, the IP PBX for B must be configured such that if B cannot be reached over IP, an incoming call is automatically forwarded to B’s cell number. This configuration results in fewer missed calls if B is frequently out of WiFi range. The path for such a call is A->Voice Gateway A->Voice Gateway B->Cell Network B->B or A->Cell Network A->Voice Gateway B->Cell Network B->B.

If the voice gateway and cellular network are run by the same provider, the routing of the call to either IP or cell can be based on the presence information provided by the call recipient (B). This means B can have a single phone number (rather than one each for VoIP and cellular). It also means that call routing would not necessarily occur based on the destination phone number or SIP URI.

See Also

Concepts

VoIP Technology Overview
Establishing a VoIP Call through an IP PBX
Establishing a Peer-to-Peer VoIP Call