Set-SPInfoPathFormsService
Sets parameters for InfoPath Forms Services in SharePoint Server.
Syntax
Set-SPInfoPathFormsService
[-ActiveSessionTimeout <Int32>]
[-AllowEmbeddedSqlForDataConnections <String>]
[-AllowUdcAuthenticationForDataConnections <String>]
[-AllowUserFormBrowserEnabling <String>]
[-AllowUserFormBrowserRendering <String>]
[-AllowUserFormCrossDomainDataConnections <String>]
[-AllowViewState <String>]
[-AssignmentCollection <SPAssignmentCollection>]
[-Confirm]
[-DefaultDataConnectionTimeout <Int32>]
[-Identity <SPFormsServicePipeBind>]
[-MaxDataConnectionResponseSize <Int32>]
[-MaxDataConnectionRoundTrip <Int32>]
[-MaxDataConnectionTimeout <Int32>]
[-MaxFormLoadTime <Int32>]
[-MaxPostbacksPerSession <Int32>]
[-MaxUserActionsPerPostback <Int32>]
[-MemoryCacheSize <Int32>]
[-RequireSslForDataConnections <String>]
[-ViewStateThreshold <Int32>]
[-WhatIf]
[-MaxSizeOfUserFormState <Int32>]
[<CommonParameters>] Description
The Set-SPInfoPathFormsService cmdlet modifies the settings for InfoPath Forms Services in SharePoint Server.
For permissions and the most current information about Windows PowerShell for SharePoint Products, see the online documentation at SharePoint Server Cmdlets.
Examples
--------------EXAMPLE 1-----------------
Set-SPInfoPathFormsService -AllowUserFormBrowserEnabling $true -AllowUserFormBrowserRendering $falseThis example modifies the AllowUserFormBrowserEnabling and AllowUserFormBrowserRendering parameter values.
--------------EXAMPLE 2-----------------
Set-SPInfoPathFormsService -AllowViewState $true -ViewStateThreshold 40961This example modifies the AllowViewState and ViewStateThreshold parameter values.
Parameters
-ActiveSessionTimeout
Specifies the duration, in minutes, that a form's session state can remain active. The default value is 1440.
The type must be a non-negative integer value in the range from 0 through 999,999.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-AllowEmbeddedSqlForDataConnections
Specifies a value that indicates whether embedded SQL authentication can be used by browser-enabled InfoPath form templates.
The type must be one of the following values: True, False (default)
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-AllowUdcAuthenticationForDataConnections
Specifies that authentication information in a universal data connection (.udcx file) can be used.
The type must be one of the following values: True (default), False
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-AllowUserFormBrowserEnabling
Specifies that users can browser enable form templates that do not contain form code, require full trust, enable rendering on a mobile device, or use a data connection managed by a server administrator.
The type must be one of the following values: True (default), False
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-AllowUserFormBrowserRendering
Specifies that browser-enabled form templates will be rendered by InfoPath Forms Services.
The type must be one of the following values: True (default), False
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-AllowUserFormCrossDomainDataConnections
Specifies that data connections to data sources located in a different domain can be queried.
The type must be one of the following values: True, False (default)
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-AllowViewState
Defines the location to store form session state: View state when True, or Session State Service when False.
The type must be one of the following values: True, False (default)
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-AssignmentCollection
Manages objects for the purpose of proper disposal. Use of objects, such as SPWeb or SPSite, can use large amounts of memory and use of these objects in Windows PowerShell scripts requires proper memory management. Using the SPAssignment object, you can assign objects to a variable and dispose of the objects after they are needed to free up memory. When SPWeb, SPSite, or SPSiteAdministration objects are used, the objects are automatically disposed of if an assignment collection or the Global parameter is not used.
When the Global parameter is used, all objects are contained in the global store.
If objects are not immediately used, or disposed of by using the Stop-SPAssignment command, an out-of-memory scenario can occur.
| Type: | SPAssignmentCollection |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-Confirm
Prompts you for confirmation before executing the command.
For more information, type the following command: get-help about_commonparameters
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-DefaultDataConnectionTimeout
Specifies the default data connection timeout in milliseconds. The default value is 10000 (10 seconds).
The type must be a non-negative integer and less than or equal to the value set for MaxDataConnectionTimeout.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-Identity
Specifies the InfoPath Forms Services service to update.
The type must be a valid GUID, in the form 12345678-90ab-cdef-1234-567890bcdefgh; a valid name of an InfoPath Forms Services service (for example, FormsService1); or an instance of a valid SPFormsService object.
| Type: | SPFormsServicePipeBind |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-MaxDataConnectionResponseSize
Specifies the maximum size allowed for a data connection response. The default value is 15000 kilobytes (KB).
The type must be a non-negative integer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-MaxDataConnectionRoundTrip
Sets a threshold, in milliseconds, for the maximum time it takes from the start of a data request to the return of the data request on the server (the data connection round trip). If the data connection round trip time exceeds this threshold, an event is logged in the Operational log.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-MaxDataConnectionTimeout
Specifies the maximum data connection timeout in milliseconds. The default value is 20000 (20 seconds).
The type must be a non-negative integer and less than or equal to 999999.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-MaxFormLoadTime
Sets a threshold, in milliseconds, for maximum form load time. If form load time exceeds this threshold, an event is logged in the Operational log.
The MaxFormLoadTime parameter measures the time it takes for a form to open, starting from when the request is accepted by the server until it leaves the server.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-MaxPostbacksPerSession
Specifies the value of the maximum postbacks that an instance of a browser-enabled InfoPath form template can make to the InfoPath Forms Services service. The default value is 20.
The type must be a non-negative integer and less than or equal to 999999.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-MaxSizeOfUserFormState
Specifies the value of the maximum size in kilobytes of session state an instance of a browser-enabled InfoPath form template can use. The default value is 4096.
The type must be a non-negative integer and less than or equal to 999999.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-MaxUserActionsPerPostback
Specifies the maximum user actions per postback. The default value is 200.
The type must be a non-negative integer and less than or equal to 999999.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-MemoryCacheSize
Sets the size, in megabytes (MB), of the cache for solutions in memory.
The default value is 250 MB.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-RequireSslForDataConnections
Specifies the Secure Sockets Layer (SSL) requirement value. If data connections in browser-enabled form templates require basic authentication or digest authentication, a password is sent over the network. Set this value to True to require an SSL-encrypted connection for these authentication types.
The type must be one of the following values: True (default), False.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-ViewStateThreshold
Specifies the maximum size in kilobytes of the session state when stored in the form view. The default value is 40.
The type must be a non-negative integer and less than or equal to 99,999,999.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |
-WhatIf
Displays a message that describes the effect of the command instead of executing the command.
For more information, type the following command: get-help about_commonparameters
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | SharePoint Server 2010, SharePoint Server 2013, SharePoint Server 2016, SharePoint Server 2019 |