Set-NetNatTransitionConfiguration
Sets the NAT64 configuration on a computer.
Syntax
Set-NetNatTransitionConfiguration
[-InstanceName <String[]>]
[-PolicyStore <PolicyStore[]>]
[-Adapter <CimInstance>]
[-State <State>]
[-InboundInterface <String[]>]
[-OutboundInterface <String[]>]
[-PrefixMapping <String[]>]
[-IPv4AddressPortPool <String[]>]
[-TcpMappingTimeoutSeconds <UInt32>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-NetNatTransitionConfiguration
-InputObject <CimInstance[]>
[-State <State>]
[-InboundInterface <String[]>]
[-OutboundInterface <String[]>]
[-PrefixMapping <String[]>]
[-IPv4AddressPortPool <String[]>]
[-TcpMappingTimeoutSeconds <UInt32>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-NetNatTransitionConfiguration cmdlet sets the NAT64 configuration on a computer.
Examples
Example 1: Set the NAT64 configuration
PS C:\>$nat64Prefix = "2009:1:2:3:4:5::/96"
PS C:\> $prefixMapping = "$nat64Prefix,0.0.0.0/0"
PS C:\> $portPool = "33.0.0.1,6000-10000"
PS C:\> Set-NetNatTransitionConfiguration -InstanceName "NAT64" OutboundInterface "corpnet" -PrefixMapping $prefixMapping -IPv4AddressPortPool $portPoolThis command sets the NAT64 configuration for the instance named NAT64.
Parameters
-Adapter
Specifies the network adapter on which to apply the NAT64 configuration.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InboundInterface
Sets the interface on which the NAT64 is listening for the matching incoming IPv6 traffic.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Specifies the input object that is used in a pipeline command.
| Type: | CimInstance[] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InstanceName
Specifies the instance of the NAT64 which is being configured.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPv4AddressPortPool
Specifies the list of IPv4 address and port ranges to be used by NAT64 for creating the mappings from the IPv6 source address to the IPv4 target address.
The format is a comma-separated list of <IPv4 address,Lowport-Highport>.
Such as "10.0.0.2,1024-3388","10.0.0.2,4000-49023".
The port value must be between 1024 and 65535.
The wildcard character (*) can be specified to use the whole port range, such as 10.0.0.1,*.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OutboundInterface
Sets the interface on which the NAT64 sends the translated IPv4 traffic.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PolicyStore
Specifies to which policy store the NAT64 configuration is applied. The acceptable values for this parameter are: Persistent and Active. If this parameter is not specified, then the cmdlet operates on both active and persistent stores.
| Type: | PolicyStore[] |
| Aliases: | Store |
| Accepted values: | PersistentStore, ActiveStore |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PrefixMapping
Sets the list of IPv6 address ranges to be translated by the NAT64.
The format is a comma-separated list of <IPv6 prefix,IPv4 subnet>.
Such as "69:FF9B::/96,0.0.0.0/0","66:FF9B::/96,192.2.0.0/8".
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-State
Sets the enabled state of the NAT64 configuration.
| Type: | State |
| Accepted values: | Disabled, Enabled |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TcpMappingTimeoutSeconds
Specifies the lifetime for a TCP mapping after which it is released by the NAT64. The minimum value is 1800 seconds.
The default value is 7200 seconds.
| Type: | UInt32 |
| Aliases: | TcpMappingTimeout |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
None
Outputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.