Set-NetDnsTransitionConfiguration
Sets the DNS64 configuration on a computer.
Syntax
Set-NetDnsTransitionConfiguration
[-Adapter <CimInstance>]
[-State <State>]
[-OnlySendAQuery <Boolean>]
[-LatencyMilliseconds <UInt32>]
[-AlwaysSynthesize <Boolean>]
[-AcceptInterface <String[]>]
[-SendInterface <String[]>]
[-ExclusionList <String[]>]
[-PrefixMapping <String[]>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-NetDnsTransitionConfiguration
-InputObject <CimInstance[]>
[-State <State>]
[-OnlySendAQuery <Boolean>]
[-LatencyMilliseconds <UInt32>]
[-AlwaysSynthesize <Boolean>]
[-AcceptInterface <String[]>]
[-SendInterface <String[]>]
[-ExclusionList <String[]>]
[-PrefixMapping <String[]>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-NetDnsTransitionConfiguration sets the DNS64 configuration on a computer.
Examples
Example 1: Set the DNS64 configuration
PS C:\>Set-NetDnsTransitionConfiguration -State Enabled -LatencyMilliseconds 400This command sets the state to Enabled and latency to 400 ms for the DNS64 configuration.
Parameters
-AcceptInterface
Specifies the interface on which the DNS64 is listening to all of the interfaces classified in the domain profile.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Adapter
Specifies the network adapter on which to set.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AlwaysSynthesize
Specifies that the DNS64 will always send both the response to the AAAA query as well as the synthesized A query response. If this parameter is set to $False, then the DNS64 will send neither the response to the AAAA query nor the synthesized A query response.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ExclusionList
Sets the list of IPv6 address ranges to be excluded from synthesis by the DNS64. The format is a comma-separated list of IPv6 addresses ranges.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Specifies the input object that is used in a pipeline command.
| Type: | CimInstance[] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-LatencyMilliseconds
Sets the delay in milliseconds between the AAAA and A query that the DNS64 sends.
| Type: | UInt32 |
| Aliases: | Latency |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OnlySendAQuery
Specifies that only A queries should be sent or both A and AAAA queries should be sent. If this parameter is set to $True, then only A queries should be sent. If this parameter is set to $False, then both A and AAAA queries should be sent.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PrefixMapping
Sets to the list of IPv6 address ranges to be used for synthesis by the DNS64.
The format is a comma-separated list of <IPv6 prefix,IPv4 subnet>.
Such as "69:FF9B::/96,0.0.0.0/0","66:FF9B::/96,192.2.0.0/8".
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SendInterface
Sets the interface on which the DNS64 sends DNS queries.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-State
Sets the enabled state of the DNS64 configuration. The acceptable values for this parameter are:
- Disabled
- Enabled
| Type: | State |
| Accepted values: | Disabled, Enabled |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
None
Outputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.