Reset-NetTeredoConfiguration
Resets the Teredo configuration elements in a Group Policy Object (GPO).
Syntax
Reset-NetTeredoConfiguration
[-IPInterface <CimInstance>]
[-PolicyStore <String>]
[-GPOSession <String>]
[-Type]
[-ServerName]
[-RefreshIntervalSeconds]
[-ClientPort]
[-ServerVirtualIP]
[-DefaultQualified]
[-ServerShunt]
[-PassThru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Reset-NetTeredoConfiguration
-InputObject <CimInstance[]>
[-Type]
[-ServerName]
[-RefreshIntervalSeconds]
[-ClientPort]
[-ServerVirtualIP]
[-DefaultQualified]
[-ServerShunt]
[-PassThru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Reset-NetTeredoConfiguration cmdlet resets the Teredo configuration elements in a Group Policy Object (GPO) configurations to the not configured state. Group Policy settings have three possible states: not configured, enabled, and disabled.
If used with no parameters, this cmdlet resets all Teredo configurations on the specified store.
Examples
Example 1: Reset the Teredo configuration
PS C:\>Reset-NetTeredoConfiguration
This command resets the Teredo configuration to the not configured state.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Type: | CimSession[] |
Aliases: | Session |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ClientPort
Resets the UDP port of the client to not configured.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Type: | SwitchParameter |
Aliases: | cf |
Position: | Named |
Default value: | False |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-DefaultQualified
Resets the Teredo qualification configuration to false. This parameter can only be specified on GPOs.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-GPOSession
Specifies the Group Policy session that contains the Teredo configuration to reset.
You can use this parameter with the NetGPO cmdlets to aggregate multiple operations performed on a GPO.
You cannot use this parameter with the PolicyStore parameter.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-InputObject
Specifies the input object that is used in a pipeline command.
Type: | CimInstance[] |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-IPInterface
Specifies the interface on which to reset the Teredo configuration. If the interface specified is not a Teredo interface, then the cmdlet does not return any configuration.
Type: | CimInstance |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-PolicyStore
Specifies the policy store that contains the Teredo configuration to reset. The acceptable values for this parameter are:
- PersistentStore
- ActiveStore
- GPO
To reset the configuration of a GPO, specify the GPO name using the following format: Domain\GPOName
You cannot use this parameter with the GPOSession parameter.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-RefreshIntervalSeconds
Resets the client refresh interval to 30 (seconds).
Type: | SwitchParameter |
Aliases: | RefreshInterval |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ServerName
Resets the server name to teredo.ipv6.contoso.com.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ServerShunt
Resets the server shunt configuration to False.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ServerVirtualIP
Resets the IPv4 address of the Teredo configuration to 0.0.0.0.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Type
Resets the type of the Teredo configuration to default.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Type: | SwitchParameter |
Aliases: | wi |
Position: | Named |
Default value: | False |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Inputs
None
This cmdlet accepts no input objects.
Outputs
The Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
When the Passthru parameter is specified, this cmdlet outputs a modified Windows Management Instrumentation (WMI) object.