Set-NetLbfoTeamNic
Sets a new VLAN id on a team interface, or restores the interface to Default mode.
Syntax
Set-NetLbfoTeamNic
[[-Name] <String[]>]
[[-Team] <String[]>]
[-VlanID <UInt32>]
[-Default]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-NetLbfoTeamNic
[-TeamOfTheTeamNic <CimInstance>]
[-VlanID <UInt32>]
[-Default]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-NetLbfoTeamNic
-InputObject <CimInstance[]>
[-VlanID <UInt32>]
[-Default]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-NetLbfoTeamNic cmdlet sets the optional values on a team interface. Only the team interface that was created when the team was created can be set to Default mode.
You must have administrator rights to run Set-NetLbfoTeamNic.
Examples
Example 1: Set the VLAN ID
PS C:\>Set-NetLbfoTeamNIC -Name "Team1 - VlanID 42" -VlanID 15This command modifies the current VLAN ID of the team interface named "Team1 - VLAN 42" to the VLAN ID 15.
Example 2: Set the VLAN ID of the primary interface to 5, and then revert it to default
PS C:\> Set-NetLbfoTeamNic -Name "Team1" -VlanID 5
This command changes the primary team interface Team1 - VLAN 5 to default mode.
PS C:\> Set-NetLbfoTeamNic -Name "Team1 - VLAN 5" -DefaultThis command sets the VLAN ID of the primary team interface named Team1 to 5.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Default
Indicates that the team interface should be restored to Default mode.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Specifies the input object that is used in a pipeline command.
| Type: | CimInstance[] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Name
Specifies the name of the team interface to modify.
| Type: | String[] |
| Aliases: | ifAlias, InterfaceAlias |
| Position: | 0 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Team
Specifies the name of the NIC team for which to modify the team interface.
| Type: | String[] |
| Position: | 1 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TeamOfTheTeamNic
Specifies the network adapter team object whose team interfaces are to be modified.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VlanID
Specifies the VLAN ID of the team interface to modify.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
None
This cmdlet takes no input objects.
Outputs
None
By default, this cmdlet produces no output.
If the PassThru parameter is specified, the cmdlet returns the newly modified MSFT_NetLbfoTeamNic object.