Get-MailboxExportRequestStatistics

This cmdlet is available only in on-premises Exchange.

Use the Get-MailboxExportRequestStatistics cmdlet to view detailed information about export requests.

This cmdlet is available only in the Mailbox Import Export role, and by default, the role isn't assigned to any role groups. To use this cmdlet, you need to add the Mailbox Import Export role to a role group (for example, to the Organization Management role group). For more information, see Add a role to a role group.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Get-MailboxExportRequestStatistics
   [-Identity] <MailboxExportRequestIdParameter>
   [-DomainController <Fqdn>]
   [-IncludeReport]
   [-Diagnostic]
   [-DiagnosticArgument <String>]
   [-DiagnosticInfo <String>]
   [-ReportOnly]
   [<CommonParameters>]
Get-MailboxExportRequestStatistics
   -MRSInstance <Fqdn>
   [-DomainController <Fqdn>]
   [-RequestGuid <Guid>]
   [<CommonParameters>]
Get-MailboxExportRequestStatistics
   -RequestQueue <DatabaseIdParameter>
   [-DomainController <Fqdn>]
   [-IncludeReport]
   [-RequestGuid <Guid>]
   [-Diagnostic]
   [-DiagnosticArgument <String>]
   [-ReportOnly]
   [<CommonParameters>]

Description

You can pipeline the Get-MailboxExportRequestStatistics cmdlet from the Get-MailboxExportRequest cmdlet.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Get-MailboxExportRequestStatistics -Identity Tony\MailboxExport1

This example returns the default statistics for the second export request for Tony Smith. The type of information returned by default includes name, mailbox, and status.

Example 2

Get-MailboxExportRequestStatistics -Identity Tony\MailboxExport | Export-CSV \\SERVER01\ExportRequest_Reports\Tony_Exportstats.csv

This example returns statistics for Tony Smith's mailbox and exports the report to a .csv file.

Example 3

Get-MailboxExportRequestStatistics -Identity Tony\LegalHold -IncludeReport | Format-List

This example returns additional information about the export request for Tony Smith's mailbox by using the IncludeReport parameter and by pipelining the results to the Format-List command. (The export request was created using the New-MailboxExportRequest.)

Example 4

Get-MailboxExportRequestStatistics -MRSInstance CAS01.contoso.com

In Exchange Server 2010, this example returns default statistics for an export request being processed by the instance of MRS running on the server CAS01. This command only returns information for export requests that are currently being processed by an instance of MRS. If the request is already finished, it won't be returned.

Example 5

Get-MailboxExportRequestStatistics -RequestQueue MailboxDatabase01

This example returns default statistics for an export request being processed by the instance of MRS running on the server CAS01. This command only returns information for export requests currently being processed by an instance of MRS. If the request is already finished, it won't be returned.

Example 6

Get-MailboxExportRequest -Status Failed | Get-MailboxExportRequestStatistics -IncludeReport | Format-List > AllExportReports.txt

This example returns additional information for all the export requests that have a status of Failed by using the IncludeReport parameter, and then saves the information to the text file AllExportReports.txt.

Parameters

-Diagnostic

The Diagnostic switch specifies whether to return extremely detailed information in the results. You don't need to specify a value with this switch.

Typically, you use this switch only at the request of Microsoft Customer Service and Support to troubleshoot problems.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DiagnosticArgument

The DiagnosticArgument parameter modifies the results that are returned by using the Diagnostic switch. Typically, you use the Diagnostic switch and the DiagnosticArgument parameter only at the request of Microsoft Customer Service and Support to troubleshoot problems.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DiagnosticInfo

This parameter is available only in the cloud-based service.

Typically, you use the DiagnosticInfo parameter only at the request of Microsoft Customer Service and Support to troubleshoot problems.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-DomainController

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Identity

The Identity parameter specifies the identity of the export request. By default, export requests are named <alias>\MailboxExportX (where X = 0-9). If you specified a name for the export request when it was created by using the New-MailboxExportRequest cmdlet, use the following syntax: Alias\Name.

This parameter can't be used with the RequestGuid or RequestQueue parameters.

Type:MailboxExportRequestIdParameter
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-IncludeReport

The IncludeReport switch specifies whether to return additional details, which can be used for troubleshooting. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MRSInstance

This parameter is available only in Exchange Server 2010.

The MRSInstance parameter specifies the fully qualified domain name (FQDN) of the Client Access server on which the Microsoft Exchange Mailbox Replication service (MRS) resides. When using this parameter, all records are returned for this instance of MRS.

You can't use this parameter with the Identity or RequestQueue parameters.

Type:Fqdn
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-ReportOnly

The ReportOnly switch returns the results as an array of report entries (encoded strings). You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-RequestGuid

The RequestGuid parameter specifies the unique identifier for the export request. To find the export request GUID, use the Get-MailboxExportRequest cmdlet. If you specify the RequestGuid parameter, you must also specify the RequestQueue parameter. You can't use this parameter with the Identity parameter.

Type:Guid
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-RequestQueue

This parameter is for debugging purposes only.

The RequestQueue parameter identifies the request based on the mailbox database where the request is being run. You can use any value that uniquely identifies the database. For example:

  • Name
  • Distinguished name (DN)
  • GUID

You can't use this parameter with the Identity parameter.

Type:DatabaseIdParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.