3.2.4.2 NetrWkstaSetInfo (Opnum 1)
The NetrWkstaSetInfo method configures a remote computer according to the information structure passed in the call.
-
unsigned long NetrWkstaSetInfo( [in, string, unique] WKSSVC_IDENTIFY_HANDLE ServerName, [in] unsigned long Level, [in, switch_is(Level)] LPWKSTA_INFO WkstaInfo, [in, out, unique] unsigned long* ErrorParameter );
ServerName: A WKSSVC_IDENTIFY_HANDLE structure (section 2.2.2.1) that identifies the server (2). The client MUST map this structure to an RPC binding handle ([C706] sections 4.3.5 and 5.1.5.2). The server MUST ignore this parameter.
Level: The information level of the data. This parameter SHOULD be one of the following values.
-
Value
Meaning
0x000001F6
The WkstaInfo parameter points to a WKSTA_INFO_502 structure (section 2.2.5.4).
0x000003F5
The WkstaInfo parameter points to a WKSTA_INFO_1013 structure (section 2.2.5.5).
0x000003FA
The WkstaInfo parameter points to a WKSTA_INFO_1018 structure (section 2.2.5.6).
0x00000416
The WkstaInfo parameter points to a WKSTA_INFO_1046 structure (section 2.2.5.7).
WkstaInfo: A pointer to a buffer that specifies the data. The format of this data depends on the value of the Level parameter.
ErrorParameter: A pointer to a value that receives an unsigned 32-bit integer. This parameter is meaningful only if the method returns ERROR_INVALID_PARAMETER and Level is equal to one of the values in the preceding table.
-
The ErrorParameter value corresponds to the member of the WKSTA_INFO structure (section 2.2.4.1) specified by the WkstaInfo parameter, which caused the ERROR_INVALID_PARAMETER error.
Return Values: When the message processing result meets the description in column two of the following table, this method MUST return one of the following values ([MS-ERREF] section 2.2).
-
Value/code
Meaning
NERR_Success
0x00000000
The operation completed successfully.
ERROR_ACCESS_DENIED
0x00000005
Access is denied.
ERROR_INVALID_PARAMETER
0x00000057
One of the function parameters is not valid.
Any other return value MUST conform to the error code requirements in Protocol Details (section 3).
If the Level parameter value is not valid, the server MUST fail the call as follows.
Note All value ranges are inclusive.
Invalid level value |
Failure processing |
---|---|
0x00000000--0x000001F5, 0x000001F7--0x000003F4, 0x000003F6--0x000003F9, 0x000003FB--0x00000415 0x00000417--0xFFFFFFFF |
The server SHOULD return ERROR_INVALID_LEVEL.<31> |
Otherwise, if the Level parameter equals 0x000001F6, the server MUST store values from the WKSTA_INFO_502 structure WkstaInfo502 member (section 2.2.4.1) specified by the WkstaInfo parameter into elements of the ADM (section 3.2.1) as follows:
wki502_keep_conn stored in Keep_Connection
wki502_max_cmds stored in Max_Commands
wki502_sess_timeout stored in Session_TimeOut
wki502_dormant_file_limit stored in DormantFileLimit
If the Level parameter equals 0x000003F5, the server MUST store values from the WKSTA_INFO_1013 structure WkstaInfo1013 member (section 2.2.4.1) of the WkstaInfo parameter into elements of the ADM, as follows:
wki1013_keep_conn stored in Keep_Connection.
If the Level parameter equals 0x000003FA, the server MUST store values from the WKSTA_INFO_1018 structure WkstaInfo1018 member (section 2.2.4.1) of the WkstaInfo parameter into elements of the ADM, as follows:
wki1018_sess_timeout stored in Session_TimeOut.
If the Level parameter equals 0x00000416, the server MUST store values from the WKSTA_INFO_1046 structure WkstaInfo1046 member (section 2.2.4.1) of the WkstaInfo parameter into elements of the ADM, as follows:
wki1046_dormant_file_limit stored in DormantFileLimit.
The server MUST validate the values stored from members of WKSTA_INFO structures specified by the WkstaInfo parameter. If this validation fails, a value SHOULD be returned in the ErrorParameter parameter according to the following table.<32>
For Level value 0x000001F6:
Member |
Valid Range |
ErrorParameter Value Returned |
---|---|---|
wki502_char_wait |
This field is not used. The sender SHOULD initialize it to any value between 0-65535. The receiver SHOULD ignore this field. |
0x0000000A |
wki502_collection_time |
This field is not used. The sender SHOULD initialize it to any value between 0-65535000. The receiver SHOULD ignore this field. |
0x0000000B |
wki502_maximum_collection_count |
This field is not used. The sender SHOULD initialize it to any value between 0-65535. The receiver SHOULD ignore this field. |
0x0000000C |
wki502_keep_conn |
1 - 65535 |
0x0000000D |
wki502_max_cmds |
50 - 65535 |
0x00000000 |
wki502_sess_timeout |
60 - 65535 |
0x00000012 |
wki502_siz_char_buf |
This field is not used. The sender SHOULD initialize it to any value between 64-4096. The receiver SHOULD ignore this field. |
0x00000017 |
wki502_max_threads |
This field is not used. The sender SHOULD initialize it to any value between 1-256. The receiver SHOULD ignore this field. |
0x00000021 |
wki502_lock_quota |
This field is not used. The sender SHOULD initialize it to any value between 0-0xFFFFFFFF. The receiver SHOULD ignore this field. |
0x00000029 |
wki502_lock_increment |
This field is not used. The sender SHOULD initialize it to any value between 0-0xFFFFFFFF. The receiver SHOULD ignore this field. |
0x0000002A |
wki502_lock_maximum |
This field is not used. The sender SHOULD initialize it to any value between 0-0xFFFFFFFF. The receiver SHOULD ignore this field. |
0x0000002B |
wki502_pipe_increment |
This field is not used. The sender SHOULD initialize it to any value between 0-0xFFFFFFFF. The receiver SHOULD ignore this field. |
0x0000002C |
wki502_pipe_maximum |
This field is not used. The sender SHOULD initialize it to any value between 0-0xFFFFFFFF. The receiver SHOULD ignore this field. |
0x0000002D |
wki502_cache_file_timeout |
0 - 0xFFFFFFFF |
0x0000002F |
wki502_dormant_file_limit |
1 - 0xFFFFFFFF |
0x0000002E |
wki502_read_ahead_throughput |
This field is not used. The sender SHOULD initialize it to any value between 0-0xFFFFFFFF. The receiver SHOULD ignore this field. |
0x0000003E |
wki502_num_mailslot_buffers |
This field is not used. The sender MAY initialize it to any value. The receiver SHOULD ignore this field. |
Not in use. |
wki502_num_srv_announce_buffers |
This field is not used. The sender MAY initialize it to any value. The receiver SHOULD ignore this field. |
Not in use. |
wki502_max_illegal_datagram_events |
This field is not used. The sender MAY initialize it to any value. The receiver SHOULD ignore this field. |
Not in use. |
wki502_illegal_datagram_event_reset_frequency |
This field is not used. The sender MAY initialize it to any value. The receiver SHOULD ignore this field. |
Not in use. |
wki502_log_election_packets |
This field is not used. The sender MAY initialize it to any value. The receiver SHOULD ignore this field. |
Not in use. |
wki502_use_opportunistic_locking |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x00000030 |
wki502_use_unlock_behind |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x00000031 |
wki502_use_close_behind |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x00000032 |
wki502_buf_named_pipes |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x00000033 |
wki502_use_lock_read_unlock |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x00000034 |
wki502_utilize_nt_caching |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x00000035 |
wki502_use_raw_read |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x00000036 |
wki502_use_raw_write |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x00000037 |
wki502_use_write_raw_data |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x00000038 |
wki502_use_encryption |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x00000039 |
wki502_buf_files_deny_write |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x0000003A |
wki502_buf_read_only_files |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x0000003B |
wki502_force_core_create_mode |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x0000003C |
wki502_use_512_byte_max_transfer |
This field is not used. The sender SHOULD initialize it to 0. The receiver SHOULD ignore this field. |
0x0000003D |
For Level value 0x000003F5
Member |
Valid Range |
ErrorParameter Value Returned |
---|---|---|
wki1013_keep_conn |
1-65535 |
0x0000000D |
For Level value 0x000003FA:
Member |
Valid Range |
ErrorParameter Value Returned |
---|---|---|
wki1018_sess_timeout |
60-65535 |
0x00000012 |
For Level value 0x00000416:
Member |
Valid Range |
ErrorParameter Value Returned |
---|---|---|
wki1046_dormant_file_limit |
1-0xFFFFFFFF |
0x0000002E |
The server SHOULD<33> enforce security measures to verify that the caller has the required permissions to execute this routine. If the server enforces security measures, and the caller does not have the required credentials, the server MUST fail the call with ERROR_ACCESS_DENIED. Specifications for determining the identity of the caller for the purpose of performing an access check are in [MS-RPCE] section 3.3.3.1.3.