2.2.1.2.164 IPRIP_GLOBAL_CONFIG

The IPRIP_GLOBAL_CONFIG structure contains global configuration for the IPRIP. This structure is used in structures IPRIP_MIB_GET_INPUT_DATA (section 2.2.1.2.161), IPRIP_MIB_GET_OUTPUT_DATA (section 2.2.1.2.162), and in the following methods:

• RRouterInterfaceTransportSetGlobalInfo (section 3.1.4.10)

• RRouterInterfaceTransportGetGlobalInfo (section 3.1.4.11)

There is only one instance of this entry in the MIB. Following it is an array of GC_PeerFilterCount DWORDs, each of which contains an IP address which is a peer which will be accepted or rejected depending on the value of GC_PeerFilterMode. If the GC_PeerFilterMode is set to IPRIP_FILTER_EXCLUDE, routes will be rejected which come from the routers whose addresses are in the peer array, and all other routers will be accepted.

Likewise, if the GC_PeerFilterMode is set to IPRIP_FILTER_INCLUDE, routes will only be accepted if they are from the routers in the peer array.

 typedef struct _IPRIP_GLOBAL_CONFIG  {
   DWORD GC_LoggingLevel;
   DWORD GC_MaxRecvQueueSize;
   DWORD GC_MaxSendQueueSize;
   DWORD GC_MinTriggeredUpdateInterval;
   DWORD GC_PeerFilterMode;
   DWORD GC_PeerFilterCount;
 } IPRIP_GLOBAL_CONFIG,
  *PIPRIP_GLOBAL_CONFIG;

GC_LoggingLevel: Specifies the logging level. This MUST be one of the following values.

Value	Meaning
IPRIP_LOGGING_NONE 0x00000000	No logging is done.
IPRIP_LOGGING_ERROR 0x00000001	Only errors are logged.
IPRIP_LOGGING_WARN 0x00000002	Errors and warnings are logged.
IPRIP_LOGGING_INFO 0x00000003	Errors, warnings, and information is logged.

GC_MaxRecvQueueSize: The maximum queue size of outstanding RIP messages that need to be processed.

GC_MaxSendQueueSize: The maximum queue size for outstanding RIP messages that have been sent out.

GC_MinTriggeredUpdateInterval: The minimum amount of time router waits before it sends triggered updates.

GC_PeerFilterMode: Specifies whether route changes from all the IP addresses are accepted. It MUST be one of the following values.

Value	Meaning
IPRIP_FILTER_DISABLED 0x00000000	Updates from all the IP addresses are accepted.
IPRIP_FILTER_INCLUDE 0x00000001	Updates only from the IP addresses specified in this structure after GC_PeerFilterCount are accepted.
IPRIP_FILTER_EXCLUDE 0x00000002	Ignores updates from the IP addresses specified in this structure after GC_PeerFilterCount.

GC_PeerFilterCount: The number of IP addresses in this structure after this field.