Share via

2.2.1.2.262 BGP_PEER

  • Article

The BGP_PEER structure<191> is used to get or set the configuration of a BGP peer.

 typedef struct _BGP_PEER {
   DWORD dwFlags;
   WCHAR szPeeringName (152 bytes)[76];
   BGP_IP_ADDRESS localIP;
   BGP_IP_ADDRESS remoteIP;
   USHORT uHoldTime;
   DWORD dwRemoteASN;
   BOOL bAutoStart;
   BGP_PEERING_OP_MODE opMode;
 } BGP_PEER,
  *PBGP_PEER;

dwFlags: Specifies the BGP peer attribute that is being modified. This field is used while modifying the BGP peer configuration. This value MUST be a bitwise OR combination of one or more of the following values.

Value

Meaning

0x00000001

The local IP address is modified.

0x00000002

The local hold timeout is modified.

0x00000004

The remote ASN is modified.

0x00000010

The operation mode of the BGP peer is modified.

szPeeringName (152 bytes): A null-terminated Unicode string that specifies a unique name for the BGP peer.

localIP: Specifies local IP Address to be used for BGP peering. This MUST be of type BGP_IP_ADDRESS (section 2.2.1.2.254).  

remoteIP: Specifies remote IP address to be used for BGP peering. This MUST be of type BGP_IP_ADDRESS.

uHoldTime: Specifies the local value of the Hold Timer in seconds. This value MUST NOT be 1 or 2.

dwRemoteASN: Specifies the peer's ASN number. This value MUST be between 1 and 65534.

bAutoStart: This MUST be set to TRUE.

opMode: Specifies the operation mode of the BGP as defined in BGP_PEERING_OP_MODE (section 2.2.1.1.24) enumeration type.